* Added TimeInForce type and updated related files
* Linter issue fix and minor coinbasepro type update
* Bitrex consts update
* added unit test and minor changes in bittrex
* Unit tests update
* Fix minor linter issues
* Update TestStringToTimeInForce unit test
* Exchange test template change
* A different approach
* fix conflict with gateio timeInForce
* minor exchange template update
* Minor fix to test_files template
* Update order tests
* Complete updating the order unit tests
* Updating exchange wrapper and test template files
* update kucoin and deribit wrapper to match the time in force change
* minor comment update
* fix time-in-force related test errors
* linter issue fix
* ADD_NEW_EXCHANGE documentation update
* time in force constants, functions and unit tests update
* shift tif policies to TimeInForce
* Update time-in-force, related functions, and unit tests
* fix linter issue and time-in-force processing
* added a good till crossing tif value
* order type fix and fix related tim-in-force entries
* update time-in-force unmarshaling and unit test
* consistency guideline added
* fix time-in-force error in gateio
* linter issue fix
* update based on review comments
* add unit test and fix missing issues
* minor fix and added benchmark unit test
* change GTT to GTC for limit
* fix linter issue
* added time-in-force value to place order param
* fix minor issues based on review comment and move tif code to separate files
* update on exchanges linked to time-in-force
* resolve missing review comments
* minor linter issues fix
* added time-in-force handler and update timeInForce parametered endpoint
* minor fixes based on review
* nits fix
* update based on review
* linter fix
* rm getTimeInForce func and minor change to time-in-force
* minor change
* update based on review comments
* wrappers and time-in-force calling approach
* minor change
* update gateio string to timeInForce conversion and unit test
* update exchange template
* update wrapper template file
* policy comments, and template files update
* rename all exchange types name to Exchange
* update on template files and template generation
* templates and generation code and other updates
* linter issue fix
* added subscriptions and websocket templates
* update ADD_NEW_EXCHANGE.md with recent binance functions and implementations
* rename template files and update unit tests
* minor template and unit test fix
* rename templates and fix on unit tests
* update on template files and documentation
* removed unnecessary tag fix and update templates
* fix Add_NEW_EXCHANGE.md doc file
* formatting, comments, and error checks update on template files
* rename exchange receivers to e and ex for consistency
* rename unit test exchange receiver and minor updates
* linter issues fix
* fix deribit issue and minor style update
* fix test issues caused by receiver change
* raname local variables exchange declaration variables
* update templates comments
* update templates and related comments
* renamed ex to e
* update template comments
* toggle WS to false to improve coverage
* template comments update
* added test coverage to Ws enabled and minor changes
---------
Co-authored-by: Samuel Reid <43227667+cranktakular@users.noreply.github.com>
* exchanges: Refactor time handling and other minor improvements
- Updated Kraken wrapper to utilise new time handling methods.
- Simplified Kucoin types by removing unnecessary structures and using direct JSON unmarshalling.
- Improved websocket handling in Kucoin to directly parse candlestick data.
- Modified Lbank types to use the new time representation.
- Adjusted Poloniex wrapper and types to utilise the new time handling.
- Updated Yobit types and wrapper to reflect changes in time representation.
- Introduced DateTime type for better handling of specific time formats.
- Added tests for DateTime unmarshalling to ensure correctness.
- Rid UTC().Unix and UTC().UnixMilli as it's not needed
- Correct Huobi timestamp usage for some endpoints.
- Rid RFC3339 time parsing since Go does that automatically.
* exchanges: Refactor JSON unmarshalling for various types and improve test coverage
* linter: Update error message in TestGetKlines
* refactor: Simplify JSON unmarshalling in MovementHistory and improve test assertions in GetKlines
* refactor: Improve JSON unmarshalling for channel name and clarify comment in wsProcessOpenOrders
* refactor: Update time handling in Huobi types to use types.Time for createdAt fields and relax GetLiquidationOrders test
* refactor: Move wsTicker, wsSpread, wsTrades, and wsCandle types to kraken_types.go for better organistion
* refactor: Add validation for underlying parameter in GetExpirationTime and update tests
* Added TimeInForce type and updated related files
* Linter issue fix and minor coinbasepro type update
* Bitrex consts update
* added unit test and minor changes in bittrex
* Unit tests update
* Fix minor linter issues
* Update TestStringToTimeInForce unit test
* fix conflict with gateio timeInForce
* Update order tests
* Complete updating the order unit tests
* update kucoin and deribit wrapper to match the time in force change
* fix time-in-force related test errors
* linter issue fix
* time in force constants, functions and unit tests update
* shift tif policies to TimeInForce
* Update time-in-force, related functions, and unit tests
* fix linter issue and time-in-force processing
* added a good till crossing tif value
* order type fix and fix related tim-in-force entries
* update time-in-force unmarshaling and unit test
* fix time-in-force error in gateio
* linter issue fix
* update based on review comments
* add unit test and fix missing issues
* minor fix and added benchmark unit test
* change GTT to GTC for limit
* fix linter issue
* added time-in-force value to place order param
* fix minor issues based on review comment and move tif code to separate files
* update on exchanges linked to time-in-force
* resolve missing review comments
* minor linter issues fix
* added time-in-force handler and update timeInForce parametered endpoint
* minor fixes based on review
* nits fix
* update based on review
* linter fix
* rm getTimeInForce func and minor change to time-in-force
* minor change
* update based on review comments
* wrappers and time-in-force calling approach
* update slice data processing
* fix linter issues
* remove unnecessary Unmarshal methods and replace type delatration and added unit tests
* minor change
* minor changes to types
* update gateio string to timeInForce conversion and unit test
* removed unused timeInForceString func from kraken
* removed redundant parentheses in slice unmarshaling
* array to slice conversion and other updates
* reverted slice target to array
* Binanceus unit test NotNil check to Len check
* change NotNil to Len check
* rename unmarshal unit test funcs name
* wrap json strings with []byte
* Added TimeInForce type and updated related files
* Linter issue fix and minor coinbasepro type update
* Bitrex consts update
* added unit test and minor changes in bittrex
* Unit tests update
* Fix minor linter issues
* Update TestStringToTimeInForce unit test
* fix conflict with gateio timeInForce
* Update order tests
* Complete updating the order unit tests
* update kucoin and deribit wrapper to match the time in force change
* fix time-in-force related test errors
* linter issue fix
* time in force constants, functions and unit tests update
* shift tif policies to TimeInForce
* Update time-in-force, related functions, and unit tests
* fix linter issue and time-in-force processing
* added a good till crossing tif value
* order type fix and fix related tim-in-force entries
* update time-in-force unmarshaling and unit test
* fix time-in-force error in gateio
* linter issue fix
* update based on review comments
* add unit test and fix missing issues
* minor fix and added benchmark unit test
* change GTT to GTC for limit
* fix linter issue
* added time-in-force value to place order param
* fix minor issues based on review comment and move tif code to separate files
* update on exchanges linked to time-in-force
* resolve missing review comments
* minor linter issues fix
* added time-in-force handler and update timeInForce parametered endpoint
* minor fixes based on review
* nits fix
* update based on review
* linter fix
* rm getTimeInForce func and minor change to time-in-force
* minor change
* update based on review comments
* wrappers and time-in-force calling approach
* minor change
* update gateio string to timeInForce conversion and unit test
* updated order test unit tes functions
* minor fixes on unit tests
* nits fix based on feedback
* update TestDeriveCancel unit test assert messages
* update TestDeriveCancel unit test assert messages
* update timeInForceFromString method to return formatted error and update functions using it
* restructure and fix minor exchanges time-in-force handling issues
* replaced unused getTypeFromTimeInForce with inline switch-based order type check
* separated the repeated timeInForce conversion code to a function
* update exchanges time-in-force handling based on review comments
* limter fix
* edded comment to validTimesInForce var
* added comment to gateio's timeInForceString func
* added goodTillCancel switch case to gateio timeInForceString func
* gateio: Add multi asset websocket support WIP.
* meow
* Add tests and shenanigans
* integrate flushing and for enabling/disabling pairs from rpc shenanigans
* some changes
* linter: fixes strikes again.
* Change name ConnectionAssociation -> ConnectionCandidate for better clarity on purpose. Change connections map to point to candidate to track subscriptions for future dynamic connections holder and drop struct ConnectionDetails.
* Add subscription tests (state functional)
* glorious:nits + proxy handling
* Spelling
* linter: fixerino
* instead of nil, dont do nil.
* clean up nils
* cya nils
* don't need to set URL or check if its running
* stream match update
* update tests
* linter: fix
* glorious: nits + handle context cancellations
* stop ping handler routine leak
* * Fix bug where reader routine on error that is not a disconnection error but websocket frame error or anything really makes the reader routine return and then connection never cycles and the buffer gets filled.
* Handle reconnection via an errors.Is check which is simpler and in that scope allow for quick disconnect reconnect without waiting for connection cycle.
* Dial now uses code from DialContext but just calls context.Background()
* Don't allow reader to return on parse binary response error. Just output error and return a non nil response
* Allow rollback on connect on any error across all connections
* fix shadow jutsu
* glorious/gk: nitters - adds in ws mock server
* linter: fix
* fix deadlock on connection as the previous channel had no reader and would hang connection reader for eternity.
* glorious: whooops
* gk: nits
* Leak issue and edge case
* Websocket: Add SendMessageReturnResponses
* whooooooopsie
* gk: nitssssss
* Update exchanges/stream/stream_match.go
Co-authored-by: Gareth Kirwan <gbjkirwan@gmail.com>
* Update exchanges/stream/stream_match_test.go
Co-authored-by: Gareth Kirwan <gbjkirwan@gmail.com>
* linter: appease the linter gods
* gk: nits
* gk: drain brain
* started
* more changes before merge match pr
* gateio: still building out
* gateio: finish spot
* fix up tests in gateio
* Add tests for stream package
* rm unused field
* glorious: nits
* rn files, specifically set function names to asset and offload routing to websocket type.
* linter: fix
* Add futures websocket request support
* gateio: integrate with IBOTExchange (cherry pick my nose)
* linter: fix
* glorious: nits
* add counter and update gateio
* fix collision issue
* Update exchanges/stream/websocket.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* add tests
* linter: fix
* After merge
* Add error connection info
* upgrade to upstream merge
* Fix edge case where it does not reconnect made by an already closed connection
* stream coverage
* glorious: nits
* glorious: nits removed asset error handling in stream package
* linter: fix
* rm block
* Add basic readme
* fix asset enabled flush cycle for multi connection
* spella: fix
* linter: fix
* Add glorious suggestions, fix some race thing
* reinstate name before any routine gets spawned
* stop on error in mock tests
* glorious: nits
* Set correct price
* glorious: nits found in CI build
* Add test for drain, bumped wait times as there seems to be something happening on macos CI builds, used context.WithTimeout because its instant.
* mutex across shutdown and connect for protection
* lint: fix
* test time withoffset, reinstate stop
* fix whoops
* const trafficCheckInterval; rm testmain
* y
* fix lint
* bump time check window
* stream: fix intermittant test failures while testing routines and remove code that is not needed.
* spells
* cant do what I did
* protect race due to routine.
* update testURL
* use mock websocket connection instead of test URL's
* linter: fix
* remove url because its throwing errors on CI builds
* connections drop all the time, don't need to worry about not being able to echo back ws data as it can be easily reviewed _test file side.
* remove another superfluous url thats not really set up for this
* spawn overwatch routine when there is no errors, inline checker instead of waiting for a time period, add sleep inline with echo handler as this is really quick and wanted to ensure that latency is handing correctly
* linter: fixerino uperino
* fix ID bug, why I do this, I don't know.
* glorious: panix
* linter: things
* whoops
* dont need to make consecutive Unix() calls
* websocket: fix potential panic on error and no responses and adding waitForResponses
* rm json parser and handle in json package instead
* in favour of json package unmarshalling
* linter: fix
* linter: fix again
* * change field name OutboundRequestSignature to WrapperDefinedConnectionSignature for agnostic inbound and outbound connections.
* change method name GetOutboundConnection to GetConnection for agnostic inbound and outbound connections.
* drop outbound field map for improved performance just using a range and field check (less complex as well)
* change field name connections to connectionToWrapper for better clarity
* spells and magic and wands
* glorious: nits
* comparable check for signature
* mv err var
* glorious: nits and stuff
* attempt to fix race
* glorious: nits
* gk: nits; engine log cleanup
* gk: nits; OCD
* gk: nits; move function change file names
* gk: nits; 🚀
* gk: nits; convert variadic function and message inspection to interface and include a specific function for that handling so as to not need nil on every call
* gk: nits; continued
* gk: engine nits; rm loaded exchange
* gk: nits; drop WebsocketLoginResponse
* stream: Add match method EnsureMatchWithData
* gk: nits; rn Inspect to IsFinal
* gk: nits; rn to MessageFilter
* linter: fix
* gateio: update rate limit definitions (cherry-pick)
* Add test and missing
* Shared REST rate limit definitions with Websocket service, set lookup item to nil for systems that do not require rate limiting; add glorious nit
* integrate rate limits for websocket trading spot
* conform to match upstream changes
* standardise names to upstream style
* fix wrapper standards test when sending a auth request through a websocket connection
* whoops
* Update exchanges/gateio/gateio_types.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* linter: fix
* linter: overload
* whoops
* spelling fixes on recent merge
* glorious: nits
* linter: fix?
* glorious: nits
* gk: assert errors touched
* gk: unexport derive functions
* gk: nitssssssss
* fix test
* gk: nitters v1
* gk: http status
* gk/nits: Add getAssetFromFuturesPair
* gk: nits single response when submitting
* gk: new pair with delimiter in tests
* gk: param update slice to slice of pointers
* gk: add asset type in params, includes t.Context() for tests
* linter: fix
* linter: fix
* fix merge whoopsie
* glorious: nits
* gk: nit
* shift over to websocket package error
* internal/exchange/websocket -> exchange/websocket
* PEAK OCD!
* appease the OCD gods
* thrasher: nits
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
Co-authored-by: Gareth Kirwan <gbjkirwan@gmail.com>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Websocket: Rename stream package
* Websocket: Rename Websocket to Manager
* Websocket: Replace explicit errs with common.NilGuard
* Websocket: Move websocket_types.go to types.go
* Websocket: Minor field comment and alignment in types
* Webosocket: Rename WebsocketConnection to Connection
* Alphapoint: Make gorilla ws import explicit
Just to avoid confusion with our own packages.
* Websocket: Move stream_match to match
* Websocket: Move websocket_connection to connection
* Websocket: Move websocket.go to manager.go
* Websocket: Break out all subscription methods into subscriptions.go
* Websocket: Move connection type into its file
* Websocket: Remove PositionUpdated
Type is not used anywhere
* Kraken: Use local constant for pong
Was the only use of websocket.Pong and doesn't really feel right to
represent kraken's api resp in one of our packages
* Websocket: Move connection sub-types to connection package
* Websocket: Move manager types into manager
* Websocket: Move ConnectionWrapper into manager
* Websocket: Move websocket_test to manager_test
* Websocket: Privatise connectionWrapper
* Websocket: Remaining types into types.go
These really belong somewhere else mostly, but this will do for now
* Websocket: Tidy up connection method vars
* Gofumpt: Moving package imports around
* Websocket: Rename errDuplicateConnectionSetup
* Websocket: Fix duplicate import of gws
* Websocket: Fix gofumpt -extra
* Websocket: Standardise import of gws across other pkgs
* Kraken: Remove unused sub conf consts
These were replaced by the generic Levels and Depth fields on all subs
* Websocket: Privitise ConnectioWrapper fields
* Websocket: inline single use var WebsocketNotAuthenticatedUsingRest
* Websocket: Move documentation to template
* Bithumb: Assertify TestWsHandleData
* gateio: Add multi asset websocket support WIP.
* meow
* Add tests and shenanigans
* integrate flushing and for enabling/disabling pairs from rpc shenanigans
* some changes
* linter: fixes strikes again.
* Change name ConnectionAssociation -> ConnectionCandidate for better clarity on purpose. Change connections map to point to candidate to track subscriptions for future dynamic connections holder and drop struct ConnectionDetails.
* Add subscription tests (state functional)
* glorious:nits + proxy handling
* Spelling
* linter: fixerino
* instead of nil, dont do nil.
* clean up nils
* cya nils
* don't need to set URL or check if its running
* stop ping handler routine leak
* * Fix bug where reader routine on error that is not a disconnection error but websocket frame error or anything really makes the reader routine return and then connection never cycles and the buffer gets filled.
* Handle reconnection via an errors.Is check which is simpler and in that scope allow for quick disconnect reconnect without waiting for connection cycle.
* Dial now uses code from DialContext but just calls context.Background()
* Don't allow reader to return on parse binary response error. Just output error and return a non nil response
* Allow rollback on connect on any error across all connections
* fix shadow jutsu
* glorious/gk: nitters - adds in ws mock server
* linter: fix
* fix deadlock on connection as the previous channel had no reader and would hang connection reader for eternity.
* gk: nits
* Leak issue and edge case
* gk: nits
* gk: drain brain
* glorious: nits
* Update exchanges/stream/websocket.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* add tests
* linter: fix
* After merge
* Add error connection info
* Fix edge case where it does not reconnect made by an already closed connection
* stream coverage
* glorious: nits
* glorious: nits removed asset error handling in stream package
* linter: fix
* rm block
* Add basic readme
* fix asset enabled flush cycle for multi connection
* spella: fix
* linter: fix
* Add glorious suggestions, fix some race thing
* reinstate name before any routine gets spawned
* stop on error in mock tests
* glorious: nits
* glorious: nits found in CI build
* Add test for drain, bumped wait times as there seems to be something happening on macos CI builds, used context.WithTimeout because its instant.
* mutex across shutdown and connect for protection
* lint: fix
* test time withoffset, reinstate stop
* fix whoops
* const trafficCheckInterval; rm testmain
* y
* fix lint
* bump time check window
* stream: fix intermittant test failures while testing routines and remove code that is not needed.
* spells
* cant do what I did
* protect race due to routine.
* update testURL
* use mock websocket connection instead of test URL's
* linter: fix
* remove url because its throwing errors on CI builds
* connections drop all the time, don't need to worry about not being able to echo back ws data as it can be easily reviewed _test file side.
* remove another superfluous url thats not really set up for this
* spawn overwatch routine when there is no errors, inline checker instead of waiting for a time period, add sleep inline with echo handler as this is really quick and wanted to ensure that latency is handing correctly
* linter: fixerino uperino
* glorious: panix
* linter: things
* whoops
* defer lock and use functions that don't require locking in SetProxyAddress
* lint: fix
* thrasher: nits
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Add in initial handling for quote/base currency deployment requirements
* include client order ID checking
* glorious: suggestions
* spell and fix
* linter/context/test
* rework tests and order side specific requirements
* linter
* mend panic at the disco
* mending more panics at the disco
* anudda fix brudda
* glorious: NITTTTTT BOOOOOMB
* leftover things and stuff
* whoops
* tie in gateio
* glorious: nit fixes life and everything.
* thrasher: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Websocket: Use ErrSubscribedAlready
instead of errChannelAlreadySubscribed
* Subscriptions: Replace Pair with Pairs
Given that some subscriptions have multiple pairs, support that as the
standard.
* Docs: Update subscriptions in add new exch
* RPC: Update Subscription Pairs
* Linter: Disable testifylint.Len
We deliberately use Equal over Len to avoid spamming the contents of large Slices
* Websocket: Add suffix to state consts
* Binance: Subscription Pairs support
* Bitfinex: Subscription Pairs support
* Bithumb: Subscription Pairs support
* Bitmex: Subscription Pairs support
* Bitstamp: Subscription Pairs support
* BTCMarkets: Subscription Pairs support
* BTSE: Subscription Pairs support
* Coinbase: Subscription Pairs support
* Coinut: Subscription Pairs support
* GateIO: Subscription Pairs support
* Gemini: Subscription Pairs support and improvement
* Hitbtc: Subscription Pairs support
* Huboi: Subscription Pairs support
* Kucoin: Subscription Pairs support
* Okcoin: Subscription Pairs support
* Poloniex: Subscription Pairs support
* Kraken: Add subscription Pairs support
Note: This is a naieve implementation because we want to rebase the
kraken websocket rewrite on top of this
* Bybit: Subscription Pairs support
* Okx: Subscription Pairs support
* Bitmex: Subsription configuration
* Fixes unauthenticated websocket left as CanUseAuth
* Fixes auth subs happening privately
* CoinbasePro: Subscription Configuration
* Consolidate ProductIDs when all subscriptions are for the same list
* Websocket: Log actual sent message when Verbose
* Subscriptions: Improve clarity of which key is which in Match
* Subscriptions: Lint fix for HugeParam
* Subscriptions: Add AddPairs and move keys from test
* Subscriptions: Simplify subscription keys and add key types
* Subscriptions: Add List.GroupPairs Rename sub.AddPairs
* Subscription: Fix ExactKey not matching 0 pairs
* Subscriptions: Remove unused IdentityKey and HasPairKey
* Subscriptions: Fix GetKey test
* Subscriptions: Test coverage improvements
* Websocket: Change State on Add/Remove
* Subscriptions: Improve error context
* Subscriptions: Fix Enable: false subs not ignored
* Bitfinex: Fix WsAuth test failing on DataHandler
DataHandler is eaten by dataMonitor now, so we need to use ToRoutine
* Deribit: Subscription Pairs support
* Websocket: Accept nil lists for checkSubscriptions
If the user passes in a nil (implicitly empty) list, we would not panic.
Therefore the burden of correctness about that data lies with them.
The list of subscriptions is empty, and that's okay, and possibly
convenient
* Websocket: Add context to NilPointer errors
* Subscriptions: Add context to nil errors
* Exchange: Fix error expectations in UnsubToWSChans
* initial consolidation of rate limiting code to request package to reduce bespoke code implementation
* continued
* finish abstraction
* lint
* exchanges: fix tests
* linter: fix
* poloniex: fix auth rate limit not being set
* ratelimiter: convert from token to weight
* glorious: nits addressed with fire
* linter: rip
* change func name set -> get
* fix test
* derbit: impl
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* initial purge and benchmarks proof before rn overhaul
* rn LinkedList -> Tranche(s) and purge references
* roll out acrost exchanges
* linterino
* rn silly billy label
* linter strikes AAAAAGAIN!
* fix some things
* rm comment
* Add actual comparison from master to branch benchmark for sorting algorithms
* lower case via git mv YAAY!
* drop code
* convert type name
* glorious: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Shift wrapper function GetDefaultConfig to exchange.Base method definition, to ensure set defaults doesn't get called twice and to reduce code
* rm alphapoint bootstrap method as is defined as exchange.Base method
* add tests
* glorious: make it a function and make it IBOTEXCHANGE
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
* Websocket: Remove IsInit and simplify SetProxyAddress
IsInit was basically the same as IsConnected.
Any time Connect was called both would be set to true.
Any time we had a disconnect they'd both be set to false
Shutdown() incorrectly didn't setInit(false)
SetProxyAddress simplified to only reconnect a connected Websocket.
Any other state means it hasn't been Connected, or it's about to
reconnect anyway.
There's no handling for IsConnecting previously, either, so I've wrapped
that behind the main mutex.
* Websocket: Expand and Assertify tests
* Websocket: Simplify state transistions
* Websocket: Simplify Connecting/Connected state
* Websocket: Tests and errors for websocket
* Websocket: Make WebsocketNotEnabled a real error
This allows for testing and avoids the repetition.
If each returned error is a error.New() you can never use errors.Is()
* Websocket: Add more testable errors
* Websocket: Improve GenerateMessageID test
Testing just the last id doesn't feel very robust
* Websocket: Protect Setup() from races
* Websocket: Use atomics instead of mutex
This was spurred by looking at the setState call in trafficMonitor and
the effect on blocking and efficiency.
With the new atomic types in Go 1.19, and the small types in use here,
atomics should be safe for our usage. bools should be truly atomic,
and uint32 is atomic when the accepted value range is less than one byte/uint8 since
that can be written atomicly by concurrent processors.
Maybe that's not even a factor any more, however we don't even have to worry enough to check.
* Websocket: Fix and simplify traffic monitor
trafficMonitor had a check throttle at the end of the for loop to stop it just gobbling the (blocking) trafficAlert channel non-stop.
That makes sense, except that nothing is sent to the trafficAlert channel if there's no listener.
So that means that it's out by one second on the trafficAlert, because any traffic received during the pause is doesn't try to send a traffic alert.
The unstopped timer is deliberately leaked for later GC when shutdown.
It won't delay/block anything, and it's a trivial memory leak during an infrequent event.
Deliberately Choosing to recreate the timer each time instead of using Stop, drain and reset
* Websocket: Split traficMonitor test on behaviours
* Websocket: Remove trafficMonitor connected status
trafficMonitor does not need to set the connection to be connected.
Connect() does that. Anything after that should result in a full
shutdown and restart. It can't and shouldn't become connected
unexpectedly, and this is most likely a race anyway.
Also dropped trafficCheckInterval to 100ms to mitigate races of traffic
alerts being buffered for too long.
* Websocket: Set disconnected earlier in Shutdown
This caused a possible race where state is still connected, but we start
to trigger interested actors via ShutdownC and Wait.
They may check state and then call Shutdown again, such as
trafficMonitor
* Websocket: Wait 5s for slow tests to pass traffic draining
Keep getting failures upstream on test rigs.
Think they can be very contended, so this pushes the boundary right out
to 5s
* Exchanges: Remove Pair upgrade handling
Now redundant behind #1401. These paths should never be met.
Several legacy coin upgrade paths being deprecated as well: ZUSD and CNY
Expecting any users with bad config from 3+ years ago would have to
reset anyway.
Also: At the time the intention of this was to upgrade the config
format.
However now, instead, it'd mostly serve to reset enabled pairs if
there's a config mistake, which doesn't feel right.
* Kraken: Fix typo in Kraken type struct
* Exchanges: Abstract exchange Start() and Run()
* Exchanges: Add test for abstracted Start
* Exchanges: Move Start to Bootstrap
* Simplify waitgroup usage
* Add call to exchange.Bootstrap to allow overide or supplementation
* Exchanges: Concurrent common bootstap actions
* Gateio: Remove incorrect Run in test
* GateIO: Fix pair dependencies in tests
This ensures that the pairs are initialised no more than needed and
kind-of just-in-time.
Better pattern might be to use a function to get these pairs when we
need them.
* Exchanges: Complete UpdatePairs before ExecLims
If we're going to update pairs, it needs to complete before we check for
limits to avoid errors on old pairs
* Exchanges: Remove Start and Run from tmpl
Since they're replaced by bootstrap now and shouldn't need customisation
normally
* Alphapoint: Move Start to Bootstrap
* GateIO: Fix linter shadow var
* cmd/exchange_template: Add wrapper function
* exchanges: force UpdateOrderExecutionLimits to wrappers as this is important for order deployment
* kucoin: Add spot order execution limits
* linter: fix
* glorious: nits
* kucoin: change from name to symbol for correct fee fetching and order deployment
* WHAAAAAAAT says Vitalik
* kucoin: Add futures limit support, fix insertion of non margin tradable pairs, update naming and add comments.
* kucoin: implement master branch changes
* Update exchanges/kucoin/kucoin_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* kucoin/test: update commentary
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* adds funding rate implementations and improvements
* merge fixes x1
* lint
* kucoin funding rates func make
* migrate sync-manager to keys
* some kucoin work
* adds some kucoin wrapper funcs
* ehhh, todo
* kucoin position
* start of orders
* adds the kucoin tests yay
* multiplier
* nits, EWS includes order limits
* NotYetImplemented, IsPerp improvements, cleaning
* lint, test fix, huobi time
* fixes issues, improves testing
* fixes linters I WRECKED
* local lint but remote lint, lint, lint, lint
* fixes err
* skip CI
* lint
* Supported rates, binance endpoints
* fixes weird mocktest problems
* no, CZ is invalid
* fixes some new EWS test errors
* all in a days work
* cleanup
* cleanup for real, also stop it binance.json
* minor coverage
* adds gateio to the slurry
* cleanup of types
* verbose verbose verbose verbose verbose verbose
* fixes huobi parsing issue
* fix bybit contract identification
* cleanup
* merge fixes
* addresses many big problems raised by SHAZ
* tracking errors and fixes
* funding rate if avail, fixes currency formatting
* Addresses nits and sneaks in extra fixes
* lint
* minor fixes after rebase
* better contract splitter for currencies like T-USDT
* forgot to add the exchange name like a fool
* merge fixes x1
* kucoin, direction, contract size
* rn direction, fix kucoin time
* WHOOPS
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* misdirection
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* exchanges: Add function to get standard config
* exchanges: add tests (cherry-pick here and above)
* after pick stuff
* cleanup
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* initial concept of a nice validation tester for exchanges
* adds some datahandler design
* expand testing
* more tests and fixes
* minor end of day fix for bithumb
* fixes implementation issues
* more test coverage and improvements, but not sure if i should continue
* fix more wrapper implementations
* adds error type, more fixes
* changes signature, fixes implementations
* fixes more wrapper implementations
* one more bit
* more cleanup
* WOW things work?
* lintle 1/1337
* mini bump
* fixes all linting
* neaten
* GetOrderInfo+ asset pair fixes+improvements
* adds new websocket test
* expand ws testing
* fix bug, expand tests, improve implementation
* code coverage of a lot of new codes
* fixes everything
* reverts accidental changes
* minor fixes from reviewing code
* removes Bitfinex cancelBatchOrder implementation
* fixes dumb baby typo for babies
* mini nit fixes
* so many nits to address
* addresses all the nits
* Titlecase
* switcheroo
* removes websocket testing for now
* fix appveyor, minor test fix
* fixes typo, re-kindles killed kode
* skip binance wrapper tests when running CI
* expired context, huobi okx fixes
* kodespull
* fix ordering
* time fix because why not
* fix exmo, others
* hopefully this fixes all of my life's problems
* last thing today
* huobi, more like hypotrophy
* golangci-lint, more like mypooroldknee-splint
* fix huobi times by removing them
* should fix okx currency issues
* blocks the application
* adds last little contingency for pairs
* addresses most nits and new problems
* lovely fixed before seeing why okx sucks
* fixes issues with okx websocket
* the classic receieieivaier
* lintle
* adds test and fixes existing tests
* expands error handling messages during setup
* fixes dumb okx bugs introduced
* quick fix for lint and exmo
* fixes nixes
* fix exmo deposit issue
* lint
* fixes issue with extra asset runs missing
* fix surprise race
* all the lint and merge fixes
* fixes surprise bugs in OKx
* fixes issues with times and chains
* fixing all the merge stuff
* merge fix
* rm logs and a panic potential
* lovely lint lament
* an easy demonstration of scenario, but not of initial purpose
* put it in the bin
* Revert "put it in the bin"
This reverts commit 15c6490f713233d43f10957367fcbf18e3818bdd.
* re-add after immediate error popup
* fix mini poor test design
* okx okay
* merge fixes
* fixes issues discovered in lovely test
* I FORGOT TO COMMIT THIS
* nit fixaroonaboo
* forgoetten test fix
* revert old okx asset intrument work
* fixes
* revert problems I didnt understand. update bybit
* fix merge bugs
* test cleanup
* further improvements
* reshuffle and lint
* rm redundant CI_TEST by rm the CI_TEST field that is redundant
* path fix
* move to its own section, dont run on 32 bit + appveyor
* lint
* fix lbank
* address nits
* let it rip
* fix failing test time range
* niteroo boogaloo
* mod tidy, use common.SimpleTimeFormat
* exchanges/sharedtestvalues: implement new functions to handle test skipping and announcements for standardising.
* exchanges: fin test impl.
* linter: fixes
* exchange_template: fix test
* allocate so it doesn't make a panic at the disco
* glorious: nits
* glorious: nits
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* linter: fix
* linter: shhhh
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* exchanges: add setTimeWindow boolean to GetKlineRequest params to differentiate between a set time period return from endpoint.
* glorious: nits
* exchange: conjugation
* Update exchanges/exchange.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits and an assortment of differences
* exchanges: remove some comments
* glorious: nits
* cleanup
* tests: fix
* Update exchanges/hitbtc/hitbtc_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/kline/kline.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/kline/kline_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* kline: fix test
* rm unused variables
* almost: nits
* glorious: nits
* linter: fix
* rm unused variable
* Refactored comment in the okex tests to ensure that it accurately reflects the variable name and the issue related to the time window, as requested by GloriousCode. The previous comment did not align with the identifier assigned to the property, which could cause confusion and misunderstanding among other programmers or stakeholders. The updated comment will improve the clarity and readability of the codebase and make it easier to understand the intended purpose of the associated variables. The change was made with the aim of improving the overall quality and maintainability of the code.
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* wrapper_coverage/exchanges: cancel context to not send rest requests/ populate context through functions that do rest requests
* linter: fix
* exchange_template: fix test
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* stream: set connection monitor delay.
- this fixes a bug where the connection monitor delay config value does not
get set to the websocket on intialization.
* multi: add connection monitor delay to exchange config.
- this adds the connection monitor delay config option to the exchange type.
- the validate function of the exchange type has been updated to validate the
connection monitor delay value as well.
* multi: resolve review issues.
* add backtester support
* Prevent live data custom candles, prevent nanosecond candles
* test coverage
* a more interesting rsi strategy result
* actual custom candle and proper strat date
* add test to old funk
* typos 🌞🌞
* this was definitely worth failing linting for
* Adds stricter processing and adapts to it
* now compat with partial and absent candles
* test fixes, zb fixes
* fix more introduced bugeroos
* fix more introduced bugeroosx2
* linting for one space is so annoying
* addresseroos niteroos
* Update backtester/engine/setup.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* kline: Add builder and testing
* Ideas
* kline: deploy builder functionality across GCT
* exchanges: implement across gct
* exchanges: Add tests and fix implementations before kline package testing and veri.
* kline: Add tests and start to fix ConvertToNewInterval
* kline: fix ConvertToNewInterval add tests
* kline: complete overarching tests now on to exchanges
* kline: finish exchange tests and implement limits
* exchanges: more fixes
* linter: fix
* engine: fix tests
* kraken: fix recent trades and other fixes
* zb: fix tests
* bithumb: fix empty insertion
* kline: refactor/optimize CreateKline function
* kline: remove the mooos!
* kline: prealloc CalculateCandleDateRanges
* linter: fix
* exchanges: prealloc extended
* fix whoopsie
* reverse fix because this is a whoopsie
* okx: fix risidual issues
* linter: fix
* kline: initial nits from @gloriouscode
* kline: rename builder -> request and cascade change
* linter: fix + test
* kline: update forced alignment on start and end times when CreateKlineRequest is called.
* nits: more more more
* NITS: Addressed
* tests: fix race issue
* Update exchanges/kline/request.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* kline: add method AddPadding() to automatically fill in holes in kline.Request functionality and reject if missing data when converting
* kline: Add params start and end to addPadding() to insert blanks in between block
* kline: remove test comment code as it's not needed anymore
* kline: fix lint and test
* kline: sort slice without extra bool check every iteration
* okx: fix issues with timeing and candles and such from niterinos & address typo
* Update exchanges/kline/kline.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: niterinos
* Update exchanges/poloniex/poloniex_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits now onto conflicts YAYA!!!
* Update exchanges/exchange_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits again
* thrasher: nitters
* thrasher: niterinos - adds partial flag for incomplete recent candles and fetching.
* kline: rm fmtizzle packageizzle
* glorious: nitters
* glorious: more niterinos
* fix last niterinos
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Modifications for a smoother live run
* Fixes data appending
* Successfully allows multi-currency live trading. Adds multiple currencies to live DCA strategy
* Attempting to get cash and carry working
* Poor attempts at sorting out data and appending it properly with USD in mind
* =designs new live data handler
* Updates cash and carry strat to work
* adds test coverage. begins closeallpositions function
* Updates cash and carry to work live
* New kline.Event type. Cancels orders on close. Rn types
* =Fixes USD funding issue
* =fixes tests
* fixes tests AGAIN
* adds coverage to close all orders
* crummy tests, should override
* more tests
* more tests
* more coverage
* removes scourge of currency.Pair maps. More tests
* missed currency stuff
* Fixes USD data issue & collateral issue. Needs to close ALL orders
* Now triggers updates on the very first data entry
* All my problems are solved now????
* fixes tests, extends coverage
* there is some really funky candle stuff going on
* my brain is melting
* better shutdown management, fixes freezing bug
* fixes data duplication issues, adds retries to requests
* reduces logging, adds verbose options
* expands coverage over all new functionality
* fixes fun bug from curr == curr to curr.Equal(curr)
* fixes setup issues and tests
* starts adding external wallet amounts for funding
* more setup for assets
* setup live fund calcs and placing orders
* successfully performs automated cash and carry
* merge fixes
* funding properly set at all times
* fixes some bugs, need to address currencystatistics still
* adds 'appeneded' trait, attempts to fix some stats
* fixes stat bugs, adds cool new fetchfees feature
* fixes terrible processing bugs
* tightens realorder stats, sadly loses some live stats
* this actually sets everything correctly for bothcd ..cd ..cd ..cd ..cd ..!
* fix tests
* coverage
* beautiful new test coverage
* docs
* adds new fee getter delayer
* commits from the correct directory
* Lint
* adds verbose to fund manager
* Fix bug in t2b2 strat. Update dca live config. Docs
* go mod tidy
* update buf
* buf + test improvement
* Post merge fixes
* fixes surprise offset bug
* fix sizing restrictions for cash and carry
* fix server lints
* merge fixes
* test fixesss
* lintle fixles
* slowloris
* rn run to task, bug fixes, close all on close
* rpc lint and fixes
* bugfix: order manager not processing orders properly
* somewhat addresses nits
* absolutely broken end of day commit
* absolutely massive knockon effects from nits
* massive knockon effects continue
* fixes things
* address remaining nits
* jk now fixes things
* addresses the easier nits
* more nit fixers
* more niterinos addressederinos
* refactors holdings and does some nits
* so buf
* addresses some nits, fixes holdings bugs
* cleanup
* attempts to fix alert chans to prevent many chans waiting?
* terrible code, will revert
* to be reviewed in detail tomorrow
* Fixes up channel system
* smashes those nits
* fixes extra candles, fixes collateral bug, tests
* fixes data races, introduces reflection
* more checks n tests
* Fixes cash and carry issues. Fixes more cool bugs
* fixes ~typer~ typo
* replace spot strats from ftx to binance
* fixes all the tests I just destroyed
* removes example path, rm verbose
* 1) what 2) removes FTX references from the Backtester
* renamed, non-working strategies
* Removes FTX references almost as fast as sbf removes funds
* regen docs, add contrib names,sort contrib names
* fixes merge renamings
* Addresses nits. Fixes setting API credentials. Fixes Binance limit retrieval
* Fixes live order bugs with real orders and without
* Apply suggestions from code review
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update backtester/engine/live.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update backtester/engine/live.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update backtester/config/strategyconfigbuilder/main.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* updates docs
* even better docs
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* few fixes and add ratelimiter
* adds test
* revert configtest.json changes
* configtest updated
* WIP: adds public endpoint support
* WIP: adds public endpoint support
* adds public endpoint support
* WIP: adds auth. endpoint support
* adds test for auth. endpoint
* fixes
* adds auth. endpoint support
* WIP: ws support
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* Testing
* Complete WS spot testing
* adds support for ws events
* minor change
* WIP: adds REST support for CoinMarginedFutures
* Fixes
* WIP: adds REST support for CoinMarginedFutures
* Fixes
* improvement in SPOT REST
* Typo fix
* WIP: add REST support for CMF Account API
* minor fixes
* WIP: add support for CMF conditional orders and few minor fixes
* complete support for CMF conditional orders
* adds support for public CMF endpoint
* adds support for CMF position API
* Complete REST CMF support
* WIP
* Testing REST CMF support
* Testing REST CMF support
* Testing REST CMF support completed
* WIP: add support for UMF
* completed non-auth UMF
* WIP: add support for REST Auth. UMF
* WIP: add support for REST Auth. UMF and some improvements
* WIP
* WIP
* WIP
* completed REST UMF
* renaming
* adds REST support for futures
* add testcases for UMF and some optimizations
* add testcases for futures
* Testing UMF, futures and its changes
* Fixes
* Fixes after testing
* WIP
* WIP
* WIP
* completed ws USDT futures support
* WIP: ws support for futures
* fixes in WS futures
* fixes in WS support
* roll back changes made for WS CMF, USDT and Futures
* fixes
* WIP
* WIP
* fixes
* Steps for new PR
* WIP
* WIP
* WIP
* WIP
* complete PR setup
* fixes for successfully running tests
* update in symbol for futures pair in test file
* WIP
* Fixes in test file and other minor fix
* fix testdata/configtest.json
* reset CONTRIBUTORS file
* review changes
* remove unwanted file
* remove redundant code
* improvisation
* adds comment for exported functions
* remove unwanted TODO and commented code
* fix
* improvisation
* fix
* defined errors
* improvisation
* improvisation
* improvisation
* updates test
* adds comment for exported types
* review changes
* review changes
* fix
* fixes
* Changes for making BYBIT compatible with existing code base
* Test file changes
* Changes for making BYBIT compatible with existing code base
* Changes for making BYBIT compatible with existing code base
* fix lint issues
* fix
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* WIP
* add test cases for new API's
* minor improvements
* add missing API and their tests
* minor fixes
* add bybitTime
* add bybitTimeSec, bybitTimeMilliSec, bybitTimeNanoSec and necessary support
* fix GetTradeHistory function
* error handling
* test fixes
* add GetServerTime API
* adds GetHistoricCandlesExtended and review changes
* test fixes
* minor fix
* integrating CMF Bybit recent change log
* minor fixes
* adds extractCurrencyPair
* minor fixes
* minor fix
* review changes
* adds variable declaration of error
* review commit
* adds embeddable type in API response for all API and integrate it
* fixes
* adds authentication WS connection
* review changes
* review changes
* compatible changes
* adds asset to GetWithdrawalsHistory
* adds asset_type in rpc.proto
* adds asset argument in gctcli withdrawal request command
* improve error handling in exchange API error
* web socket fix
* review changes
* improvements
* improvements
* minor fix
* review changes
* fixing wrapper issues
* fixes
* fixes
* review changes
* add test cases
* fix for GetActiveOrders
* lint fixes
* fixes in websocket
* adds wrapper testcases
* adds wrapper testcases
* adds wrapper testcases
* fixes
* fix issue with GetHistoricCandlesExtended
* fix merge issues
* improving error reporting
* adds wrapper testcases and a minor fix
* gctrpc changes
* adds test cases
fixes in websocket
* review changes for ws
* review changes in WS
* fix gctrpc
* merge fixes
* review changes
* WIP
* updates pair in configs
* adds new asset USDCMarginedFutures
* adds URL const for USDCMarginedFutures
* adds API support
* minor fixes
* adds kline API
* minor fix
* adds API
* adds API
* adds API
* WIP
* WIP
* WIP
* adds support for USDC auth requests to SendAuthHTTPRequest
* adds SendUSDCAuthHTTPRequest
* run test and fix them
* rollback support added for Auth. USDC request inside SendAuthHTTPRequest
* adds API and test cases
* adds API and test cases
* adds APIs and test cases
* adds APIs
* adds rate limit for USDC
* adds USDCMarginedFutures to wrapper
* adds USDC testcases in wrapper and fix few issues
* minor test fixes
* minor test fixes
* fix lint issues
* WIP
* Merge changes
* minor fixes
* remove "else" and optimize
* review changes
* review changes
* review changes
* fix lint issue
* merge fix
* fix test
* fix templates and run them
* changes after merge
* review changes and improvements
* code improvement
* fixes with respect to changes in API response in documentation
* fixed review change in test
* adds check in CancelExistingOrder
* update exchange template
* review changes
* adds GetDepositAddress API
* WIP: adds GetOrderHistory
* complete GetOrderHistory
* fixes
* adds test case
* fixes and add WithdrawFund API
* WIP
* WIP
* updating all SendAuthHTTPRequest call
* adds WithdrawCryptocurrencyFunds
* update test cases
* fix lint issues
* fixes after merge
* adds GetAvailableTransferChains and few fixes
* minor fix in GetDepositAddress
* minor fix with WS ping/pong handling
* add ping handler for WS Auth.
* fix typo mistake
* update doc
* orders: deprecate SubmitResponse return and change to *order.Detail construct detail from order.Submit struct
* orders: add coverage, fix tests
* coinut: rm test for checking
* orders: revert change for return and change field ID to a more explicit name OrderID
* orders: Add method to see if the order was placed
* order: change field name in Cancel type to be more explicit
* orders: standardize field -> OrderID
* backtester: populate change
* orders: add test
* gctscript: fix field name
* linter: fix issues
* linter: more fixes
* linter: forever
* exchanges_tests: populate order.Submit field exchange name
* Update exchanges/order/order_types.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/order/orders.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* glorious: nits
* thrasher: nits
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* orders: Add derive modify struct method to order.Detail and then subsequent method to derive and standardize response details
* exchanges: call modify method in wrappers
* linter: fixes
* engine/wsroutineman: remove print summary
* glorious: nits, removed modifyOrder functionality for Bithumb. There are not docs to support this.
* Update exchanges/order/orders.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* order: slight optimizations
* orders: add benchmarks, small optimize and change order side to uin8 for comparitive optimizations.
* orders: continue to convert string type -> uint
* orders/backtester: interim move type to orders package, later can expand or deprecate.
* orders: handle errors
* orders: optimize filters and remove error returns when its clearly not needed
* orders: remove log call
* backtester: zero value check
* orders/futures: zero value -> flag
* linter: fix
* linter: more fixes
* linters: rides again
* glorious: nits
* common: Add zero value unix check for time values; also addresses glorious nits
* glorious scott: nits
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Bump CI versions
* Specifically set go version as 1.17.x bumps it to 1.18
* Another
* Adjust AppVeyor
* Part 1 of linter issues
* Part 2
* Fix various linters and improvements
* Part 3
* Finishing touches
* Tests and EqualFold
* Fix nitterinos plus bonus requester jobs bump for exchanges with large number of tests
* Fix nitterinos and bump golangci-lint timeout for AppVeyor
* Address nits, ensure all books are returned on err due to syncer regression
* Fix the wiggins
* Fix duplication
* Fix nitterinos
* btcmarkets: add websocket checksum, fetch different book via REST
* Update exchanges/btcmarkets/btcmarkets_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* buffer: add explicit type for buffer related variables and comments, do all checks buffer side and load in setup as per glorious recom.
* buffer: fix tests add error
* buffer: test re-add code cov
* depth/stream/ws: fix tests, change field name to be more specific.
* buffer: rm unused field and small comment fixes
* btcm: remove redundant field
* glorious: nits
* buffer: fix commenting
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* implements futures functions and GRPC functions on new branch
* lint and test fixes
* Fix uneven split pnl. Adds collateral weight test. docs. New clear func
* Test protection if someone has zero collateral
* Uses string instead of double for accuracy
* Fixes old code panic
* context, match, docs
* Addresses Shazniterinos, var names, expanded tests
* Returns subaccount name, provides USD values when offlinecalc
* Fixes oopsie
* Fixes cool bug which allowed made up subaccount results
* Subaccount override on FTX, subaccount results for collateral
* Strenghten collateral account info checks. Improve FTX test
* English is my first language
* Fixes oopsies
* Fixes for unrealised PNL & collateral rendering
* Fixes lint and tests
* Shaznit fixes
* Secret Shaznit
* Updates account information across wrappers to include more fields
* Updates online collateral calculations. Updates RPC data
* Accurately calculates collateral offline and online minus testing
* Tests and lint chocolate
* Simplifies accountinfo results
* Fixes shaznits
* Adds new func
* Increases collateral accuracy again again again x 200
* Increases accuracy of collateral rendering
* Fixes minor merge/test issues
* Linterino
* Fixes ws test. Improves collateral calculations and rendering
* Make it prettier
* Removes the lock I put on 👀
* Adds `additional_collateral_used` field, renders orig currency
* Fixes unrelated test
* Fix test
* Correctly calculate spot margin borrow collateral
* Address fun lint surprise
See https://github.com/golangci/golangci-lint/issues/741#issuecomment-1017014331
* Strange lint fixing x2
* Continued lint journey
* Nolint the nolint to not lint the lint
* Adds two new fields to response
* More linting issues arising
* fIX3s_c4s|NG
* Fixes command flags' incorrect numbering
* FairMarket = Won
* backtester/request: trying to fix panic (WIP)
* request: fix race for transport layer
* request: linter issue fix
* request: more linter issues
* requester: Add function to remove the tracking of underlying http client and add to engine unload exchange.
* request: add more context to error return
* request: Fix after cherry pick issues
* request: fix niterinos
* exchanges: change return to package variable
* request: changed named
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
