* CI/build: Update Go version, linters and fix minor issues
* Bump golangci-lint to v1.56.1
* BinanceUS: Make uint usage consistent
* Throw blank identifiers into the trash
* Websockets: Fix subscription failure on reconnect
If a websocket is disconnected then the subscription map was left with
old subscriptions, causing:
`Okx websocket: subscription failure, channel already subscribed for ...`
* fixup! Websockets: Fix subscription failure on reconnect
Fixes review comment https://github.com/thrasher-corp/gocryptotrader/pull/1457#discussion_r1468947509
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* Websockets: Add keys to websocket subscriptions
* This switches all RO uses of the mutex to use a RLock method.
* The mutex used for discrete field access has had scope drift from
name 'connectionMutex' so rename to more appropriate fieldsMutex
* The mutex used for Set/CanUseAuthEndpoints moves from the
subscriptions endpoint to the fieldsMutex
* Add GetSubscription by key
* Expose stream.Matcher type
* Bitfinex: Subscribe and Unsubscribe atomicly
* Fix Auth failures ignored
* This change makes it so that Subscribe and Unsubscribe wait for success
** Tells the DataHandler about errors
** Errors are returned to consumers
* Subscribes concurrently to the channels
* It also simplifies the chanId to stream mapping
* Removes unable to locate chanID: %d errors which are just noise
* Paves the way for unified channelSubscription id handling
* Adds support for subId for Book subscriptions, which is more robust
* Vastly simplifies what we need to test TestWsSubscribedResponse
This test was working to ensure that the various fancy key parsing
mechanisms all worked. Now that we use subId, we just need a thorough
test of that
* Expose Match.Set in order to capture websocket incoming data
Can't see another way of doing this. Doesn't seem too bad
* Allow tests to run with auth or WS
These flags made it difficult to run the tests whilst working on
websockets
* Enable API auth and WS in testconfig
This change minimises the changes requires for a full test run against
live endpoints, so that new contributors have a clearer testing path.
I cannot see any reason to turn WS off and Auth endpoints off when we're
not going to run API tests without Creds being set, and we're not going
to do live fire tests without canManipulateRealOrders
* TestWsSubscribe and various fixes
** Enables the websocket for live non-authed integration tests by default
** Adds an integration test for subscriptions
** Changes the Ws tests to respect canManipulateRealOrders
** Uses WsConnect instead of setupWs; fixes seqNo config not sent for WS tests
** Allows api creds to live in config/testdata.json which might be
less likely to accidentally commit, and less obtrusive
* Bitfinex: Support period and timeframe for Candles
* Fixes manual Subscribe() symbol or key formatting
* Unifies handling of params for DefaultSubscriptions and manual
subsrciptions
* Bitfinex: Handle conf and info WS channel events
* Bitfinex: Better tests for subscriptions
* fixup! Websockets: Add keys to websocket subscriptions
* fixup! Bitfinex: Subscribe and Unsubscribe atomicly
* fixup! Websockets: Add keys to websocket subscriptions
* Websockets: Add Pending subscription status
Add a status tracker so that Sub/Unsub can prevent duplicates,
and also fixes when first message comes before we have added the sub
to the tracker
* Websockets: Add State instead of pending
This change allows more clarity about the current state and
checks for specifically already Unsubing
* Bitfinex: Fix first sub message maybe lost
The only link we have between a sub req and the sub resp is the subID.
And the only link we have between a sub message and the sub is the chanID.
We can't derive a link using Pair or anything else.
This meant that by sending the resp and its chanID down the IncomingData
channel, we allowed the channel reader to maybe process the next
message, the first message on the channel, before the runtime executed
the switch back to subscribeToChan waiting on the chan.
To fix this, we key initially on subId.(string), and then replace it
with chanId.(int64) when we have it *inside* the wsHandleData so we
know we've procedurally handled it before the next message.
subscribeToChan is then free to remove the subId keyed Sub regardless of
error or not
If there's an error, we don't need to inline handling because there
won't be any second update.
Expands test coverage to make sure those subId keyed subscriptions are
removed.
* Websocket: Validate state in SetChanState
* fixup! Bitfinex: Fix first sub message maybe lost
* Websockets: Rename RemoveUnsuccessfulSubs
Implementation doesn't imply Unsuccessful or need to.
This change supports the registering of Pending subs
* Bitfinex: Fix race in Tests
* okx: books 5 (cherry-pick)
* okx: shift types to types file, remove commented code and updated field name to better reflect pushed type
* linter: fix
* remove slowness
* * Introduce function checksubscriptions and shift check of subscriptions to internal websocket package
* Shift Max websocket connection int to Websocket setup (temp) for this use case only.
* glorious: nits
* linter: fix
* websocket: don't try and subscribed with nothing to subscribe to.
* Update exchanges/stream/websocket_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* moves everything to use single map keys, also breaks
* full rollout
* tests
* fix a little bug
* minor test fixups
* Fix Key use
* rm 🔑 from 🔑 struct name
* exchanges: Add function to get standard config
* exchanges: add tests (cherry-pick here and above)
* after pick stuff
* cleanup
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* WS: Relay disconnect errors to subscribers
Subscribers probably care when the WS got disconncted.
Tell them and expose a method to test the error for matching
* Fix linter error
* orderbook: Check assignment of time values and reject if not set.
* linter: fix
* buffer: additional linter winter fixter
* Implement through pending exchanges
* finished push
* linty: minty
* gomod: tidy
* thrasher: nits
* glorious: nits
* orderbook: purge type now in favour of external call allocation
* orderbook: push last param
* orderbook: only 1 unlock call is needed
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* stream/buffer: Adds key map optimisation (cherry-pick)
* stream/buffer: Add buffer to DataHandler intermediary. Add field InitialUpdate bool to toggle when first update is seen for initial sync.
* whoops
* buffer: Add difference benchmarks for reference
* glorious: nits (reverting out of context changes)
* RM unused error that will be used later
* purge: benchmark
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* initial concept of a nice validation tester for exchanges
* adds some datahandler design
* expand testing
* more tests and fixes
* minor end of day fix for bithumb
* fixes implementation issues
* more test coverage and improvements, but not sure if i should continue
* fix more wrapper implementations
* adds error type, more fixes
* changes signature, fixes implementations
* fixes more wrapper implementations
* one more bit
* more cleanup
* WOW things work?
* lintle 1/1337
* mini bump
* fixes all linting
* neaten
* GetOrderInfo+ asset pair fixes+improvements
* adds new websocket test
* expand ws testing
* fix bug, expand tests, improve implementation
* code coverage of a lot of new codes
* fixes everything
* reverts accidental changes
* minor fixes from reviewing code
* removes Bitfinex cancelBatchOrder implementation
* fixes dumb baby typo for babies
* mini nit fixes
* so many nits to address
* addresses all the nits
* Titlecase
* switcheroo
* removes websocket testing for now
* fix appveyor, minor test fix
* fixes typo, re-kindles killed kode
* skip binance wrapper tests when running CI
* expired context, huobi okx fixes
* kodespull
* fix ordering
* time fix because why not
* fix exmo, others
* hopefully this fixes all of my life's problems
* last thing today
* huobi, more like hypotrophy
* golangci-lint, more like mypooroldknee-splint
* fix huobi times by removing them
* should fix okx currency issues
* blocks the application
* adds last little contingency for pairs
* addresses most nits and new problems
* lovely fixed before seeing why okx sucks
* fixes issues with okx websocket
* the classic receieieivaier
* lintle
* adds test and fixes existing tests
* expands error handling messages during setup
* fixes dumb okx bugs introduced
* quick fix for lint and exmo
* fixes nixes
* fix exmo deposit issue
* lint
* fixes issue with extra asset runs missing
* fix surprise race
* all the lint and merge fixes
* fixes surprise bugs in OKx
* fixes issues with times and chains
* fixing all the merge stuff
* merge fix
* rm logs and a panic potential
* lovely lint lament
* an easy demonstration of scenario, but not of initial purpose
* put it in the bin
* Revert "put it in the bin"
This reverts commit 15c6490f713233d43f10957367fcbf18e3818bdd.
* re-add after immediate error popup
* fix mini poor test design
* okx okay
* merge fixes
* fixes issues discovered in lovely test
* I FORGOT TO COMMIT THIS
* nit fixaroonaboo
* forgoetten test fix
* revert old okx asset intrument work
* fixes
* revert problems I didnt understand. update bybit
* fix merge bugs
* test cleanup
* further improvements
* reshuffle and lint
* rm redundant CI_TEST by rm the CI_TEST field that is redundant
* path fix
* move to its own section, dont run on 32 bit + appveyor
* lint
* fix lbank
* address nits
* let it rip
* fix failing test time range
* niteroo boogaloo
* mod tidy, use common.SimpleTimeFormat
When an existing ws disconnects the connection manager goro will call Connect.
This prevents Connect trying to start another connection manager if it's
already running
* engine: shutdown and unload exchange when engine is stopped
* linter: fixes
* engine/exchMan: add nil check
* engine/exchanges: add shutdown method to exchanges, rm len check lock not needed, expanded code coverage, address some nits
* exchMan: report all failed shutdowns across exchanges, implement timer and monitoring routines.
* exchMan: improve shutdown sequence and aloc.
* further improvement
* exchman: log from warn to error
* websockconnection: Suppress error return when closure is caused by library
* linter: fix
* fix racies
* add note on why not parallel tests
* glorious: nits
* spelling kween
* thrasher: nits
* engine: change print of setting using reflection, I keep forgetting to implement this so program around forgetfulness
* engine/exchange_management: remove wait group and just rely on intermediary lock
* glorious: nits
* Update common/common.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update main.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* stream: set connection monitor delay.
- this fixes a bug where the connection monitor delay config value does not
get set to the websocket on intialization.
* multi: add connection monitor delay to exchange config.
- this adds the connection monitor delay config option to the exchange type.
- the validate function of the exchange type has been updated to validate the
connection monitor delay value as well.
* multi: resolve review issues.
* public endpoints methods added
* Completing mapping REST endpoints
* Binanceus Wrapper methods -Partially
* Binanceus Wrapper methods -Partially
* BinaWra functions with test funs; Not Completed
* Finalizing wrapper methods & test
* Fix & Complete wrapper functions
* Finalizing wrapper methods & test
* Adding Stream Datas
* WS Test functions
* CI: Fix golangci-lint linter issues
* CI: Fix reverting unnessesary changes and type conversion issues
* CI: Fix reverting unnessesary changes and type conversion issues
* Adding Public endpoints and tests
* Adding Market and Public Endpoints
* Adding Public endoints
* Public Trading Endpoints & Authenticated Trade order methods
* Adding Authenticated Methods and Tests
* Adding algo and Funding Authenticated endpoints
* Adding funding trading endpoints and correspondint tests
* adding authenticated endpoints
* Completing Block Trading endpoints and added subaccount endpoints
* Completing sub account and grid Trading endpoints
* Adding Rate Limit and missing endpoints
* Wrapper and Websocket handlers
* Fixing Websocket Test and Push Data Handler Issues
* Fixing Websocket Test and Push Data Handler Issues
* Fixing linter issues, package dependency, and other slight tempos
* Fixing linter and slight tempos
* Update on test functions, and Rest and Websocket Endpoint handlers
* Remove okex, adding comments, and slight fixes on endpoints.
* Fixing linter issues and adding comments
* Slight code changes, updating documentation, and n and linter issues
* Fix context and configuration endpoint issues
* slight fixes on config and test files
* adding some missing test and fix linter issues
* fix linter issue
* Slight fixes on code structure, shorthand exp,and ot and other
* Fix slight linter issue
* Slight code fixes and fixing linter issues
* fixing linter iissues
* fixing linter iissues
* slight linter issue fix
* slight linter issue fix
* Fix on models, type convert funcs and endpoints
* Adding Error messages map and update of models
* Fix on error message string and linter issues
* Fix slight linter issue
* Fix slight linter issue
* Fixing type converts, models, and linter issues
* Adding Ws fixes
* Slight fix on websocket and other issues
* Adding slight websocket fixes
* Remove 'books5' channel default subscription
* Small changes on default subscription and checksum
* Fix slight websocket tempos
* Fix Wrapper function tempost and linter issues
* Resolving slight naming and other issues
* Resolve slight pointer issues
* resolve slight linter issues
* Resolve config files issue
* Update websocket and wrapper funcs with test and docs
* fixs on websocket multiplexer, types, and other slight issues
* fix slight linter issues
* slight update on web-socket orderbook and tickers
* fix slight issues and websocket runtime errors
* Slight unit test fix and assing simple semaphore
* FIx race issue
* Update on authenticated endpoints
* Fix wsSetupRun check in websocket 'setupWsAuth' func
* Update wsSetupRun check in websocket 'setupWsAuth' func
* Slight update on websocket handling
* Fix some race conditions
* fix slight tempos
* fix authenticated test issues
* Update on conditional statements
* slight update on unit test
* fix unit test tempos
* Fix slight tempos
* Change check map from struct valued to bool valued
* slight fix trial
* Slight unit test update
* Fix websocket timeout error
* Updating websocket subscription endpoints, and unit tests
* update unit tests
* Slight issue on wrapper method 'GetActiveOrders'
* Overall code update
* Addressing missing review comments
* Fix unit test tempo and linter issue
* Monor fix
* Slight update
* Slight unit test fix
* Slight fixes
* Slight fixes
* Fixing on missing review comments
* Adding WS Fixes
* slight fix
* Monor fix on unit test
* Minor convert issue
* Minor change on WS
* Monor logic fix
* Fix code structure and logic issues
* Fixing small typos
* fix slight data format issue
* Update on trade and order wrapper methods
* Adding slight update
* fix on order detail
* Slight update on FetchTradablePairs wrapper method
* Slight update on wrapper
* Update on deserialization and other slight issues
* Final update
* Resolve missing review comments
* Slight update on config and unit test
* minor fix on GetDepositAddress param
* Minor fix
* orderbook/buffer: data integrity and resubscription pass
* btcmarkets: REMOVE THAT LIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIINE!!!!!!!!!!!!!!!!!
* buffer: reinstate publish, refaactor, invalidate more and comments
* buffer/orderbook: improve update and snapshot performance. Move Update type to orderbook package to util. pointer through entire function calls. (cleanup). Change action string to uint8 for easier comparison. Add parsing helper. Update current test benchmark comments.
* dispatch: change publish func to variadic id param
* dispatch: remove sender receiver wait time as this adds overhead and complexity. update tests.
* dispatch: don't create pointers for every job container
* rpcserver: fix assertion issues with data publishing change
* linter: fixes
* glorious: nits addr
* depth: change validation handling to incorporate and store err
* linter: fix more issues
* dispatch: fix race
* travis: update before fetching
* depth: wrap and return wrapped error in invalidate call and fix tests
* btcmarkets: fix commenting
* workflow: check
* workflow: check
* orderbook: check error
* buffer/depth: return invalidation error and fix tests
* gctcli: display errors on orderbook streams
* buffer: remove unused types
* orderbook/bitmex: shift function to bitmex
* orderbook: Add specific comments to unexported functions that don't have locking require locking.
* orderbook: restrict published data functionality to orderbook.Outbound interface
* common: add assertion failure helper for error
* dispatch: remove atomics, add mutex protection, remove add/remove worker, redo main tests
* dispatch: export function
* engine: revert and change sub logger to manager
* engine: remove old test
* dispatch: add common variable ;)
* btcmarket: don't overflow int in tests on 32bit systems
* ci: force 1.17.7 usage for go
* Revert "ci: force 1.17.7 usage for go"
This reverts commit af2f95563bf218cf2b9f36a9fcf3258e2c6a2d91.
* golangci: bump version add and remove linter items
* Revert "golangci: bump version add and remove linter items"
This reverts commit 3c98bffc9d030e39faca0387ea40c151df2ab06b.
* dispatch: remove unsused mutex from mux
* order: slight optimizations
* nits: glorious
* dispatch: fix regression on uuid generation and input inline with master
* linter: fix
* linter: fix
* glorious: nit - rm slice segration
* account: fix test after merge
* coinbasepro: revert change
* account: close channel instead of needing a receiver, push alert in routine to prepare for waiter.
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Bump CI versions
* Specifically set go version as 1.17.x bumps it to 1.18
* Another
* Adjust AppVeyor
* Part 1 of linter issues
* Part 2
* Fix various linters and improvements
* Part 3
* Finishing touches
* Tests and EqualFold
* Fix nitterinos plus bonus requester jobs bump for exchanges with large number of tests
* Fix nitterinos and bump golangci-lint timeout for AppVeyor
* Address nits, ensure all books are returned on err due to syncer regression
* Fix the wiggins
* Fix duplication
* Fix nitterinos
* btcmarkets: add websocket checksum, fetch different book via REST
* Update exchanges/btcmarkets/btcmarkets_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* buffer: add explicit type for buffer related variables and comments, do all checks buffer side and load in setup as per glorious recom.
* buffer: fix tests add error
* buffer: test re-add code cov
* depth/stream/ws: fix tests, change field name to be more specific.
* buffer: rm unused field and small comment fixes
* btcm: remove redundant field
* glorious: nits
* buffer: fix commenting
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* implements futures functions and GRPC functions on new branch
* lint and test fixes
* Fix uneven split pnl. Adds collateral weight test. docs. New clear func
* Test protection if someone has zero collateral
* Uses string instead of double for accuracy
* Fixes old code panic
* context, match, docs
* Addresses Shazniterinos, var names, expanded tests
* Returns subaccount name, provides USD values when offlinecalc
* Fixes oopsie
* Fixes cool bug which allowed made up subaccount results
* Subaccount override on FTX, subaccount results for collateral
* Strenghten collateral account info checks. Improve FTX test
* English is my first language
* Fixes oopsies
* Fixes for unrealised PNL & collateral rendering
* Fixes lint and tests
* Shaznit fixes
* Secret Shaznit
* Updates account information across wrappers to include more fields
* Updates online collateral calculations. Updates RPC data
* Accurately calculates collateral offline and online minus testing
* Tests and lint chocolate
* Simplifies accountinfo results
* Fixes shaznits
* Adds new func
* Increases collateral accuracy again again again x 200
* Increases accuracy of collateral rendering
* Fixes minor merge/test issues
* Linterino
* Fixes ws test. Improves collateral calculations and rendering
* Make it prettier
* Removes the lock I put on 👀
* Adds `additional_collateral_used` field, renders orig currency
* Fixes unrelated test
* Fix test
* Correctly calculate spot margin borrow collateral
* Address fun lint surprise
See https://github.com/golangci/golangci-lint/issues/741#issuecomment-1017014331
* Strange lint fixing x2
* Continued lint journey
* Nolint the nolint to not lint the lint
* Adds two new fields to response
* More linting issues arising
* fIX3s_c4s|NG
* Fixes command flags' incorrect numbering
* FairMarket = Won
* Expose trade feed websocket exchange data through data channel
Most relevant to applications that import GCT as a lib, this allows
them to (through configuration, disabled by default) receive trade data
through the data channel similarly to the orderbook feed.
* exchanges: allow exposure of trade websocket feed through data channel
* Expose fill feed websocket abstracted exchange data through data channel
* exchanges: allow exposure of fill websocket feed through data channel
* Allow configuration of orderbook publish period
For some applications that import GCT it's more interesting to be
immediately notified of an exchange orderbook update instead of
only getting notified every 10 seconds. This option allows that
to happen while keeping the previous default.
* exchanges: allow configuration of orderbook update period
* golangci-lint/CI: Bump versions
Fix remaining linter issues
* Specifically set AppVeyor version
* Fix the infamous typos 👀
* Add go env cmd to AppVeyor
* Add go version cmd to AppVeyor
* Specify AppVeyor image, adjust linters
* Update go get to go install due to deprecation
* Bump golangci-lint timeout time for AppVeyor
* Change NW contract to NQ
* Address nitters
* GetRandomPair -> Pair{}
* Address nits
* Address time nitterinos plus additional tweaks
* More time inception upgrades!
* Bending time and space
* websocket: select case error if no receiver, add in functionality to reset to initial sync for books on a new websocket connection
* websocket: fix tests
* websocket: log error instead of losing it
* websocket: fix whoopsie
* exchanges: fix test
* websocket: force requirement of specific functionality
* exchanges: fix tests
* exchanges/websocket: move waitgroup add before scheduling across exchanges
* gateio: add feature subscribe
* bithumb/bittrex: include connection state reset, fix reconnection bug for Bithumb
* huobi: Add listen to shutdown to routine so it actually returns and stops being a naughty boy.
* huobi: add missing waitgroup add.
* exchanges: bleed comms channels
* binance: fix reconnection bug with buffer
* bithumb: fix reconnection bug with ws orderbook when websocket is diabled/enabled
* bithumb/bittrex: add bleeders for ws orderbook jobs
* linter: fix
* kraken: reduce code block from double assertion
* This bug ruined my day.
* glorious: error checking
* zb: add correct path for websocket connection
* exchange: Add verbosity when config conflicts and overwrites default values
* zb: add https to path
* exchanges: glorious nits
* stream: Add checkAndSetMonitoring to reduce potential routine bundling, increase timeout and check state in tests
* stream: remove check that is not needed.
* glorious: nits addr.
* lint: test
* [FIX] Enable ws orderbook sync recovery by:
- Testing if books have been cleared
- Assigning options when loading snapshot
* orderbooks: remove setlastupdate method and on select depth method that updates linked list, this reduced lock contention across code base and fixes buffer bug on applying buffered updates
* WS - Introduce signaling for the need to fetch the orderbook
* Address nits
* Update error messages to include exchange name
Co-authored-by: shazbert <oharareid.ryan@gmail.com>
* orderbook: export orderbook nodes for external strategy inspection
* orderbook: Add in methods for locking and unlocking multiple books at the same time e.g. book1.LockWith(book2); defer book1.UnlockWith(book2)
* include waiting functionality for depth change alert
* backtester: add word.
* log: include logger changes to impl with downstream integration
* engine: reduce params for loading exchange
* assort: rm verbose in tests, change wording in ob, expose sync.waitgroup for ext. sync options
* ticker: reduce map look ups and contention when using RW mutex when there are over 80% writes adds find last function to get the latest rate
* engine/syncmanager: add in waitgroup for step over for external package calls
* cleaup
* engine: linter fix
* currency/fx: include all references to fiat currencies to default
* orderbook: Add in fields to Unsafe type for strategies to detect potential out of sync book operations
* syncmanager: changed config variable to display correct time
* ordermanager: Add time when none provided
* currency/manager: update getasset param to get enabled assets for minor optimizations
* ftx: use get all wallet balances for a better accounts breakdown
* orderbook: unlock in reverse order
* bithumb: fixes bug on market buy and sell orders
* bithumb: fix bug for nonce is also time window sensitive
* bithumb: get orders add required parameter
* bithumb: Add asset type to account struct
* currency: improve log output when checking currency and it fails
* bithumb: Add error return on incomplete pair
* ticker:unexport all service related methods
* ticker/currency: fixes
* orderbook: fix comment
* engine: revert variable name in LoadExchange method
* sync_manager: fix panic when enabling disabling manager
* engine: fix naming convention of exported function and comments
* engine: update comment
* orderbook: fix comment for unsafe type
* Speeds up tests
* Reduces time.Sleeps, lowers CreateTestBot complexity. Breaks things
* Removal of unecessary config reads. Parallel tests. Lower times
* Speeds up recent trades results
* mini update
* zoooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooom
* Removes the dupes
* Lint
* post cherrypick
* Fix rare kraken data race
* Fixes banking global issues. Fixes postgres trades
* rmline for appveyor test
* Expands timeout in event that channel is closed before send
* Fix data race
* No rows, no bows and definitely no shows
* Removes parallel from createsnapshot tests
* Extends timedmutext test a smidge. Exchange fatality
* Shorter end timeframe and bigger candle
* Adds lovely initial concept for historical data doer
* Adds ability to save tasks. Adds config. Adds startStop to engine
* Has a database microservice without use of globals! Further infrastructure design. Adds readme
* Commentary to help design
* Adds migrations for database
* readme and adds database models
* Some modelling that doesn't work end of day
* Completes datahistoryjob sql.Begins datahistoryjobresult
* Adds datahistoryjob functions to retreive job results. Adapts subsystem
* Adds process for upserting jobs and job results to the database
* Broken end of day weird sqlboiler crap
* Fixes issue with SQL generation.
* RPC generation and addition of basic upsert command
* Renames types
* Adds rpc functions
* quick commit before context swithc. Exchanges aren't being populated
* Begin the tests!
* complete sql tests. stop failed jobs. CLI command creation
* Defines rpc commands
* Fleshes out RPC implementation
* Expands testing
* Expands testing, removes double remove
* Adds coverage of data history subsystem, expands errors and nil checks
* Minor logic improvement
* streamlines datahistory test setup
* End of day minor linting
* Lint, convert simplify, rpc expansion, type expansion, readme expansion
* Documentation update
* Renames for consistency
* Completes RPC server commands
* Fixes tests
* Speeds up testing by reducing unnecessary actions. Adds maxjobspercycle config
* Comments for everything
* Adds missing result string. checks interval supported. default start end cli
* Fixes ID problem. Improves binance trade fetch. job ranges are processed
* adds dbservice coverage. adds rpcserver coverage
* docs regen, uses dbcon interface, reverts binance, fixes races, toggle manager
* Speed up tests, remove bad global usage, fix uuid check
* Adds verbose. Updates docs. Fixes postgres
* Minor changes to logging and start stop
* Fixes postgres db tests, fixes postgres column typo
* Fixes old string typo,removes constraint,error parsing for nonreaders
* prevents dhm running when table doesn't exist. Adds prereq documentation
* Adds parallel, rmlines, err fix, comment fix, minor param fixes
* doc regen, common time range check and test updating
* Fixes job validation issues. Updates candle range checker.
* Ensures test cannot fail due to time.Now() shenanigans
* Fixes oopsie, adds documentation and a warn
* Fixes another time test, adjusts copy
* Drastically speeds up data history manager tests via function overrides
* Fixes summary bug and better logs
* Fixes local time test, fixes websocket tests
* removes defaults and comment,updates error messages,sets cli command args
* Fixes FTX trade processing
* Fixes issue where jobs got stuck if data wasn't returned but retrieval was successful
* Improves test speed. Simplifies trade verification SQL. Adds command help
* Fixes the oopsies
* Fixes use of query within transaction. Fixes trade err
* oopsie, not needed
* Adds missing data status. Properly ends job even when data is missing
* errors are more verbose and so have more words to describe them
* Doc regen for new status
* tiny test tinkering
* str := string("Removes .String()").String()
* Merge fixups
* Fixes a data race discovered during github actions
* Allows websocket test to pass consistently
* Fixes merge issue preventing datahistorymanager from starting via config
* Niterinos cmd defaults and explanations
* fixes default oopsie
* Fixes lack of nil protection
* Additional oopsie
* More detailed error for validating job exchange
* Initial codes for a trade tracker
* Moving everything in a broken fashion
* Removes tradetracker. Removes some errors for subsystems
* Cleans up some subsystems, renames stuttering types. Removes some global Bot usage
* More basic subsystem renaming and file moving
* Removes engine dependency from events,ntpserver,ordermanager,comms manager
* Exports eventManager, fixes rpcserver. puts rpcserver back for now
* Removes redundant error message, further removes engine dependencies
* experimental end of day interface usage
* adds ability to build the application
* Withdraw and event manager handling
* cleans up apiserver and communications manager
* Cleans up some start/setup processes. Though should separate
* More consistency with Setup Start Stop IsRunning funcs
* Final consistency pass before testing phase
* Fixes engine tests. Fixes stop nil issue
* api server tests
* Communications manager testing
* Connection manager tests and nilsubsystem error
* End of day currencypairsyncer tests
* Adds databaseconnection/databaseconnection_test.go
* Adds withdrawal manager tests
* Deposit address testing. Moved orderbook sync first as its more important
* Adds test for event manager
* More full eventmanager testing
* Adds testfile. Enables skipped test.
* ntp manager tests
* Adds ordermanager tests, Extracts a whole new subsystem from engine and fanangles import cycles
* Adds websocket routine manager tests
* Basic portfolio manager testing
* Fixes issue with currency pair sync startup
* Fixes issue with event manager startup
* Starts the order manager before backtester starts
* Fixes fee tests. Expands testing. Doesnt fix races
* Fixes most test races
* Resolves data races
* Fixes subsystem test issues
* currency pair syncer coverage tests
* Refactors portfolio. Fixes tests. Withdraw validation
Portfolio didn't need to exist with a portfolio manager. Now the porfolio manager
is in charge how the portfolio is handled and all portfolio functions are attached
to the base instead of just exported at the package level
Withdrawal validation occurred at the exchange level when it can just be run at the
withdrawal manager level. All withdrawal requests go through that endpoint
* lint -fix
* golang lint fixes
* lints and comments everything
* Updates GCT logo, adds documentation for some subsystems
* More documentation and more logo updates
* Fixes backtesting and apiserver errors encountered
* Fixes errors and typos from reviewing
* More minor fixes
* Changes %h verb to %w
* reverbs to %s
* Humbly begins reverting to more flat engine package
The main reasoning for this is that the subsystem split doesn't make sense
in a golang environment. The subsystems are only meant to be used with engine
and so by placing them in a non-engine area, it does not work and is
inconsistent with the rest of the application's package layout.
This will begin salvaging the changes made by reverting to a flat
engine package, but maintaining the consistent designs introduced.
Further, I will look to remove any TestMains and decrease the scope
of testing to be more local and decrease the issues that have been
caused from our style of testing.
* Manages to re-flatten things. Everything is within its own file
* mini fixes
* Fixes tests and data races and lints
* Updates docs tool for engine to create filename readmes
* os -> ioutil
* remove err
* Appveyor version increase test
* Removes tCleanup as its unsupported on appveyor
* Adds stuff that I thought was in previous merge master commit
* Removes cancel from test
* Fixes really fun test-exclusive data race
* minor nit fixes
* niterinos
* docs gen
* rm;rf test
* Remove typoline. expands startstop helper. Splits apiserver
* Removes accidental folder
* Uses update instead of replace for order upsert
* addresses nits. Renames files. Regenerates documentation.
* lint and removal of comments
* Add new test for default scenario
* Fixes typo
* regen docs
* Exchanges: Initial implementation after rebase of depth (WIP)
* orderbook/buffer: convert and couple orderbook interaction functionality from buffer to orderbook linked list - Use single point reference for orderbook depth
* buffer/orderbook: conversion continued (WIP)
* exchange: buffer/linkedlist handover (WIP)
* Added some tests for yesterday
* linkedList: added more testing and trying to figure out broken things
* Started tying everything in
* continuous integration and testing
* orderbook: expanded tests
* go mod tidy
* Add in different synchornisation levels for protocols
Add in timer for the streaming system to reduce updates to datahandler
Add in more test code as I integrate more exchanges
* Depth: Add tests, add length check to call linked list updating, add in constructor.
Linked List: Improve tests, add in checks for zero liquidity on books.
Node: Added in cleaner POC, add in contructor.
Buffer: Fixed tests, checked benchmarks.
* orderbook: reinstate dispatch calls
* Addr glorious & madcozbad nits
* fix functionality and add tests
* Address linterinos
* remove label
* expanded comment
* fix races and and bitmex test
* reinstate go routine for alerting changes
* rm line :D
* fix more tests
* Addr glorious nits
* rm glorious field
* depth: defer unlock to stop deadlock
* orderbook: remove unused vars
* buffer: fix test to what it should be
* nits: madcosbad addr
* nits: glorious nits
* linkedlist: remove unused params
* orderbook: shift time call to outside of push to inline, add in case for update inster price for zero liquidity, nits
* orderbook: nits addressed
* engine: change stream -> websocket convention and remove unused function
* nits: glorious nits
* Websocket Buffer: Add verbosity switch
* linked list: Add comment
* linked list: fix spelling
* nits: glorious nits
* orderbook: Adds in test and explicit time type with constructor, fix nits
* linter
* spelling: removed the dere fence
* depth: Update alerting mechanism to a more battle tested state
* depth: spelling
* nits: glorious nits
* linked list: match cases
* buffer: fix linter issue
* golangci: increase timeout by 30 seconds
* nodes: update atomic checks
* spelling: fix
* node: add in commentary
* exchanges/syncer: add function to switch over to REST when websocket functionality is not available for a specific asset type
* linter: exchange linter issues
* syncer: Add in warning
* nits: glorious nits
* AssetWebsocketSupport: unexport map
* Nits: Adrr
* rm letter
* exchanges: Orderbook verification change for naming, deprecate checksum bypass as it has the potential to obfuscate errors that are at the tail end of the book, add in verification for websocket stream updates
* general: fix spelling remove breakpoint
* nits: fix more glorious nits until more are found
* orderbook: fix tests
* orderbook: fix wait tests and add in more checks
* nits: addr
* orderbook: remove dispatch reference
* linkedlist: consolidate bid/ask functions
* linked lisdt: remove words
* fix spelling
* port orderbook binance management from draft singular asset (spot) processing add additional updates to buffer management
* integrate port
* shifted burden of proof to exchange and remove repairing techniques that obfuscate issues and could caause artifacts
* WIP
* Update exchanges, update tests, update configuration so we can default off on buffer util.
* Add buffer enabled switching to all exchanges and some that are missing, default to off.
* lbtc set not aggregate books
* Addr linter issues
* EOD wip
* optimization and bug fix pass
* clean before test and benchmarking
* add testing/benchmarks to sorting/reversing functions, dropped pointer to slice as we aren't changing slice len or cap
* Add tests and removed ptr for main book as we just ammend amount
* addr exchange test issues
* ci issues
* addr glorious issues
* Addr MCB nits, fixed funding rate book for bitfinex and fixed potential panic on nil book return
* addr linter issues
* updated mistakes
* Fix more tests
* revert bypass
* Addr mcb nits
* fix zero price bug caused by exchange. Filted out bid result rather then unsubscribing. Updated orderbook to L2 so there is no aggregation.
* Allow for zero bid and ask books to be loaded and warn if found.
* remove authentication subscription conflicts as they do not have a channel ID return
* WIP - Batching outbound requests for kraken as they do not give you the partial if you subscribe to do many things.
* finalised outbound request for kraken
* filter zero value due to invalid returned data from exchange, add in max subscription amount and increased outbound batch limit
* expand to max allowed book length & fix issue where they were sending a zero length ask side when we sent a depth of zero
* Updated function comments and added in more realistic book sizing for sort cases
* change map ordering
* amalgamate maps in buffer
* Rm ln
* fix kraken linter issues
* add in buffer initialisation
* increase timout by 30seconds
* Coinbene: Add websocket orderbook length check.
* Engine: Improve switch statement for orderbook summary dissplay.
* Binance: Added tests, remove deadlock
* Exchanges: Change orderbook field -> IsFundingRate
* Orderbook Buffer: Added method to orderbookHolder
* Kraken: removed superfluous integer for sleep
* Bitmex: fixed error return
* cmd/gctcli: force 8 decimal place usage for orderbook streaming
* Kraken: Add checksum and fix bug where we were dropping returned data which was causing artifacts
* Kraken: As per orderbook documentation added in maxdepth field to update to filter depth that goes beyond current scope
* Bitfinex: Tracking down bug on margin-funding, added sequence and checksum validation websocket config on connect (WIP)
* Bitfinex: Complete implementation of checksum
* Bitfinex: Fix funding book insertion and checksum - Dropped updates and deleting items not on book are continuously occuring from stream
* Bitfinex: Fix linter issues
* Bitfinex: Fix even more linter issues.
* Bitmex: Populate orderbook base identification fields to be passed back when error occurrs
* OkGroup: Populate orderbook base identification fields to be passed back when error occurrs
* BTSE: Change string check to 'connect success' to capture multiple user successful strings
* Bitfinex: Updated handling of funding tickers
* Bitfinex: Fix undocumented alignment bug for funding rates
* Bitfinex: Updated error return with more information
* Bitfinex: Change REST fetching to Raw book to keep it in line with websocket implementation. Fix woopsy.
* Localbitcoins: Had to impose a rate limiter to stop errors, fixed return for easier error identification.
* Exchanges: Update failing tests
* LocalBitcoins: Addr nit and bumped time by 1 second for fetching books
* Kraken: Dynamically scale precision based on str return for checksum calculations
* Kraken: Add pair and asset type to validateCRC32 error reponse
* BTSE: Filter out zero amount orderbook price levels in websocket return
* Exchanges: Update orderbook functions to return orderbook base to differentiate errors.
* BTSE: Fix spelling
* Bitmex: Fix error return string
* BTSE: Add orderbook filtering function
* Coinbene: Change wording
* BTSE: Add test for filtering
* Binance: Addr nits, added in variables for buffers and worker amounts and fixed error log messages
* GolangCI: Remove excess 0
* Binance: Reduces double ups on asset and pair in errors
* Binance: Fix error checking
* End of day commit moving packages and setting foundation into how trade processing will go
* Conformity
* tdd candle generation based on received trade data, renames orderbookbuffer back to buffer for now...
* Formalises test functions and designs the trade processor
* Theoretical amending old candles to allow any trades that were part of an old processed candle to be more accurate. Saving of candles will only occur on previous cycles, extending memory usage a bit longer
* Figures out sqlboiler for sqlite. Updates websocket entries to process trade data
* One more trade data
* Adds more exchange support
* Adds PSQL stuff
* Begins creating sql implementation
* End of day commit. Helper functions and understanding sql usage in GCT
* Adds delete and cleans up table design
* Finishes trades conceptually. Awaits candle data update in order to translate trades to candles
* Initial handling of trades in coinbene
* Proto
* Fixing of some bugs, attempting to address coinbene asset type ws issues
* Fixes up coinbene websocket implementation for the most part
* finalises coinbene websocket implementation. Adds new ability to parse currencies without a delimiter
* Implements rpc commands and adds testing
* updates the following to be compatible with trade data update: Theoretical amending old candles to allow any trades that were part of an old processed candle to be more accurate. Saving of candles will only occur on previous cycles, extending memory usage a bit longer
* Changes trade to be its own entity rather than attached to a websocket.
* Adds coverage to trades. Changes signature of `AddTradesToBuffer` to return error. Now automatically shuts down without need for channel listening. Will automatically start up again if it gets data
* Implements trade fetching at the wrapper level for a bunch of exchanges. Adds trade id to script updoot. Probably breaking change
* Implements trade fetching for all wrappers hurray hurrah. Updates all the tests
* Adds new interface func to get recent trades. Ensures GetExchangeHistory continues until conditions are met
* Adds new readme, tests all new wrapper endpoints, updates exchange_wrapper_issues to test new endpoints. Updates exchange_wrapper_coverage with new coverage... Fixes lame bug causing wrapper tests to fail from being poorly setup. Adds loopy loop to ensure that all data is captured when requesting exchange history
* Bugfix on psql migrations. Rebases latest changes, updates table design to use base and quote, updates trades to use exchange_name_id
* Adds new config field for saving trades to the database per exchange. Now exits trade processing when trade saving is not enabled. Similarly for wrapper, does not save if not enabled
* Minor bitfinex trade fixes. continues on buffer processing errors, now saves transactionid to the db
* Adds support for generating candles from candlesextended. May extend it further, idk
* Updates trade candles to be able to fill missing data with trades. Adds more tests. Also does a thing where you can forcefully override a candle based on internal trade data instead of API data
* Fixes bug where force deletions did not follow up with insertions. Adds force to candle commands
* Fixes specific exchange based issues. Extends recent trades to 24 hours where possible
* Fixes issue with saved tests. Fixes tests for trades. Adds parallel to tests. Pre-fixes people's nits
* Adds new GRPC functions to find out what data is missing from trades and candles. Fixes some assumptions from missing period code.
* Adds unique constraint. Fixes up niggling issues for wrappers and websockets
* Fixes issues with using unix times in the database trying to retrieve data via the CLI. Reduces save time to 15 seconds
* Updates trades to use timestamps instead of int64 unix
* Adds missing FTX wrapper implementation. Regens docs
* Linting the linters. Updating readme
* Adds new command to set whether an exchange can process trades
* Doc update
* Adds recent trades and historic trade endpoints to grpc
* formats pair_test.go to appease linter gods
* Addresses data race. Removes logging of missing intervals on unrelated function (now that it has its own rpc command). The buffer time isnt customisable, but I don't feel it needs to be at a config level at all really.
* Fixes a few niterinos regarding spacing, type conversion, a weird Bitmex 0 trade value error, unsubscriptions and cli command references
* Reduces map lookups. Adds base func and moves wrappers to use it
* Uses better currency formatter. Adds time based validation to trade history. Reverts configtest.json
* Reverts config and updates test names. Also WAYYYYY LESS SPAMMY
* oopsie doopsie missed a whoopsie
* mint flavoured lint
* Fixes issues caused by rebase
* Fixes issue with timestamps not converting properly from command to RPCServer. Adds new error type. Adds shorthand entries to some commands. Removes os.Exit from tests. Makes Gemini test rolling. Adds enabled exchange check to RPC function. Escapes timestamp on bitstamp. Renames var
* fixes whoopsie oopsie doopsie I forgot to remove code shoopsie
* missed a line
* 🎉🎉 :tada:Breaks everything in an end of day commit 🎉🎉🎉
* Modifies function 'createlocaloffset' to return a string instead. Uses strings for all time based start and end commands. Uses UTC times in RPC server and updates SQLITE to use formatted time based queries
* Adds concurrency-safe way of changing SaveTradeData and checking it. Fixes embarrassing typo
* End of day fix, adds bitfinex update to loop until either the return trades shows no new dates, or meets specifications. Fixes egregious typo
* Improves testing and handling of historical trades function
* Fixes tests after latest changes
* Fix potential fatal err now that db is enabled in test config now
* Fixes up some database settings to use a local engine instead of global var
* DELICIOUS LINT CHOCOLATE FIXES
* Fixes data race by slashing competitor's tyres
* Adds mock test fixes to allow for live and stored data test
* Removes verbosity in engine level tests. Adds new timezone format to highlight the timezone for RPC functions. Removes reference to Preix index fund
* Oopsie doopsie, fixed a whoopsie
* Loggers can no longer do data drag races on my lawn 👴
* Removes bad lock
* Addresses command nits. End of day conceptual commit, trying to calculate spans of time in the context of missing periods. Tests will fail
* Adds new stream response for retrieving trade history as it can take time to do. Unsuccessfully attempts to simplify time range calculation for missing trades response
* Adds new timeperiods package to calculate time periods, time ranges and whether data is in those ranges. Removes kline basic implementation of same concept
* Fixes lint issues. Fixes test. Moves trade cli commands to their own trade subcommands
* Updates lakebtc to no longer have gethistorictrades as it is unsupported. Adds more validation to rpc functions
* Removes requirement to have trades when testing trade wrapper functions. Doesn't really prove it works if there are no trades for a given currency in a time period.
* Addresses nits, runs linting fix and ensures a test is consistent
* Fix merge issues
* Moves sort to timeperiods. Adds test coverage. Fixes typo
* Removes log package in CLI
* Fixes `GetTrades` url
* Reorders all instances of validation occuring after settingup RPC connection
* Fixes test to ensure that it is setup before testing that it is setup
* Fixed issue with bool retrieval. Removes double append
* Fixes Binance times, fixes bitfinex sell sides, fixes huobi times, sorts all responses
* Fixes poloniex trade id consistency. Makes recent trade for poloniex consistent with others (15 minutes). Fixes coinbene. Fixes localbitcoins to use quote currency. Fixes coinut times. Updates huobi trade id, saves okgroup trades. Fixes bid and ask to buy and sell
* Removes websocket trades for lakebtc as it did not meet our requirements for processing. Adds new constraints to the database to ensure we have uniqueness on trades where ID doesn't exist and doesn't trigger errors for trades where the tid does
* Fixes migration for postgres to downscale properly
* Really really fixes the psql index changes
* Fixes broken tests
* Now with working tests and no pocket lint
* Makes the side column nullable with no more constraint for it. adds migrations and runs generation. comments lakebtc
* Lint & Sprüngli
* Updates zb to use more appropriate side
* Fixes oopsie
* Attempts to address a data race from globals
* Fixes build
* Fixes missed regen rpc files
* Updates readme to point to trade readme. Fixes exchange_wrapper_coverage wrapper count and untested panics, tests bitfinex funding pair test for `fUSD`, adds shiny new param `tradeprocessinginterval`
* mint flavoured lint
* Uses the real default to set the default value by default
* Fixes some extra tests surrounding email sending and number incompatibility
* Reverts test config
* re-adds gom2/usdt currency
* Fixes typo, don't look!
* Fixes minor codelingo pickups
* Adds more precision to handling of trade data from Kraken. Expands test
* interface christmas tree
* lint
* Adds potential fix for websocket reconnection failure
* Addr tests, we now don't return an error, this allows us to reuse existing if still in operation.
* update depends && go mod tidy
* adds in channel direction for parameter
* Add full subscriber function, increased test coverage, initiate go routine after calling routine instance check in connection monitor
* fix linter issue
* use protected methods for setting field variables
* removed function, added tests
* lock sub manipulation
* fix linter issue
* Added in transport idleconnection timeout to fix MACOS reconnection issue when all idle connections are consuming resources
* used protected methods to set underlying fields
* set variable via time.Duration param
* Added in lock around field variable in test
* Addr thrasher nits and expanded exchange tests
* Fix test
* Addr glorious nits
* go mod tidy
* Add a larger timeout for traffic monitor if the test runs slow
* initial update of currency system
* WIP progress
* Finish initial currency string error returns
* fix whoopsie testing for non https insecureinos
* Current WIP for getEnabledPairs check and error return
* WIP continued
* When getting enabled pairs throw error when item is not contained in available pairs list
* More updates -WIP
* Wip continued including potential interface
* Current WIP
* pairs manager pass
* drop asset string and just use the map key, plus return some errors and create more work for myself.
* clean and fixed a bug in currency.json, will not populate correctly without coinmarketcap api keys set.
* purge logger references after merge
* go mod tidy after merge
* Pointer change WIP
* fix some issues and added error returns to a few items (WIP)
* WIP
* Clean
* Fix some linter issues
* Fix more linter issues
* even more linters
* xtda nits
* revert pointer change and rm field
* Addr madcozbadd nits
* fix linter issues: shadow declarations
* Fix linter issues: gocritic huge things
* linter issue fix
* Addr nits
* flush go mod files
* after merge woops
* fix shadow dec
* Addr thrasher nits
* addr nits
* fix some issues
* more fixes
* RM println
* Addr glorious nits
* Add helper method for setting assets
* add missing format directive
* Addr nits
* Actually process new futures contracts -_- derp
* WIP for GRPC upgrade for pair management
* update config pairs
* finished disabling and enabling asset
* linked update of tradable pairs to cli
* fix oopsies
* defer writing to file on program termination for currency storage system
* update template
* don't add disabled asset items to initial sync
* Fix enable disabling a list of pairs and added in a slice error type so we can add whats allowable without throwing an error and return a report, also addressed some other nits
* WIP on getting a channel to unsub
* Wip track down unsubscribe bug and start creating streaming interface
* purge websocket orderbook object and centralised updating routine for orderbook
* general clean before interface implementation
* stage one connection interface WIP
* WIP
* repackage wshandler WIP
* find difference of subs and change signature of subscriber functions so we can batch subscriptions and unsubscription in exchanges that support it
* design change on mange subscription routine WIP
* integrated ZB with the new webosocket updates
* WIP - okex conversion
* integrate websocket upgrades for lakebtc, kraken, huobi, hitbtc, gateio, and WIP for coinbene
* integrate another range of exchanges for websocket update
* Added subscriber and unsubscriber methods to websocket functionality
* fixed tests WIP
* amalgamate cache setup with main websocket setup
* reinstate exported fields traffic alert and shutdownC to accommodate gemini and lakebtc implementations
* added in colon
* Updated websocket auth handling as they werent getting passed through. Added a setter method for websocket URL due to the Binance generated auth key/listenKey. Fixed bug which stopped reconnection.
* Fix subscribe candle bug
Fix time conversion in candle
Fix inititial candle history to datahandler
Include funding to orderbook handling
Include funding to trades
Reduce code duplication in sub and unsub functions
Added the ability to include funding currency websocket subscriptions
validated all channels and added more items todo list (Auth items)
* RM line
* bitstamp pass
* btcmarkets pass - still needs to implement unsubscriber functionality and pairs change test.
* Batch outgoing subscriptions and fix unsubscribe bug
* BTSE - bumped time to minute to reduce pinger calling by 75 calls per day. Fix authentication bug and add authentication pass into to-do. Batch outgoing subscription calls
* fix type field and batch outgoing subs and unsubs for coinbasepro
* Batch outgoing subs and unsubs
* Fixes bug when matching return from authentication
* Fix bug where params where being sent out of order due to map ,where depth items werent being subscribed too, where trying to subscribe to too many kline items caused error, where trying to get a nano secocond ID conflicted due to speed of generation.
* Add websocket capability for currency pair change by utilizing full channel subscription list in subscribe function.
* Add error handling
* Fix public: time conversions, subscription list, stopped pushing heartbeat to data handler, aggregated list of connections.
* hitBTC pass
* returned nil instead of error due to period null bids and asks updates coming through.
* Fix auth ping capture and reply. Added in interval handling for kline data. Added correct full trade data handling. Fix subscribe and unsubscribe.
* Fix when websocket auth conn and token generation fail we don't try and auth sub. Fix bug between auth and normal connection id generation and matching. Batch outgoing payloads to increase efficiency. Updated matching functions to utilise channels instead of waitgroups and go routines.
* RM debug output
* rm func to get shutdown channel
* Add unsubscriber functionality, added wsTicker type, removed return as this will impede data flow and cause reconnection when handling and processing data
* okgroup WIP
* *Added missing fields for websocket trades
*Fix bug processing kline interval
*Added fields for websocket ticker struct
*Fix auth bug
-Updated request and response matching param to interface so we can custom signature match. Stops auth subscribing before a reply is issued.
-Updated channel inclusion of pair fo auth subs as this was missing.
*Assortment of perfomance improvements
* poloniex pass
* send all trades to data handler, validated enabled and disable pairs
* initial clean
* centralised request matching mechanism
* websocket main improvements WIP
* WIP
* Websocket management via gctcli WIP
* GRPC expansion
* Updated GCTCLI with websocket url and proxy setting functionality which flushes connection
* Fix continuous spawning of routines bug on error with reconnection
* Addr linter issues
* fix subscription bug that I caused when I changed to a switch case
* fix linter issue
* fix woopsie
* End of day WIP
* Fix order submission REST, time conversion, order type conversion, orderID bugs
* fix gateio test and unsubscribe bug
* revert comment out code
* websocketAPI changed to to true in configtest.json
* fix race in gateio test
* End of day WIP for websocket tests.
* BugFix for binance when book isn't seeded. Updated websocket tests. Deprecated subscription manager. RM wrapper funcs.
* Added string title to exchange name as they are saved as lower case in type, reinstated verbose check in websocket.go
* Added verbosity check for setting websocket URL
* fix bug where the asset had a mind of its own
* purge dodgy coding
* Fix tests, drop blocking chan in websocket Dial function
* few more changes
* race condition fix for websocket tests.
* fix intermittent test failure due to underlying hash table storage
* Address madcuzbad nit
* RM superfluous printlines
* Add quick top example with paramater fields
* First pass Glorious nits
* As per madcozbad suggestion return error when enabled pair not found in full return map. Add test.
* addr madcozbadd nits
* as per glorious suggestion rm'd loadedJSON field
* adjusted ticker, added test and RM'd code that can never be executed
* Addr nits and add in crypto rand genration for ID's
* remove global channel declaration and rescoped as this was causing a lock
* as per glorious suggestion restructured return error for websocket
* addr glorious suggestions
* fix linter issues
* purge non-existent pair from testdata
* add side field to struct and parse
* addr glorious nits
* Add verbosity to error returns and logs and fix string parsing in GCTRPC
* fix speeling mistwake
* Adds websocket functionality check before flushing websocket connection
* Addr kraken panic and setting/flush websocket url stage one.
* added websocket url check before setting with tests
* Added in edge case test if by the time we call contains on available pairs it has been changed
* remove error return for func
* Continuation of tests
* continuation of tests
* Stop potential panic within pair creation function
* Implement changes to upstream
* rm sup comment
* fix bug when subscribing and unsubscribing. Also add in boolean to determine there are currencies that need to be flushed via set pairs via gctcli
* fix test
* Fix linter issues
* Fix tests
* turn websocket off in config example
* Fix issue where you cannot enable websocket when config is set to false, also added config websocket enable state saving
* Introduced err var for same error returns
* Add err var exchange base not found
* restructure function
* drop gctscript from generic response name
* drop managesub delay const as its not being used
* correctly implement websocket rate limiting for coinut
* remove quotations
* drop pair management check
* fix spelling
* return error in function to not update currency with unset role
* amalagamted enable/disable into set function and added in pairstore fetch function
* update error description
* rm function
* moved test function to sharedtestvals and move type to types.go
* append delimiter onto currency delimiter strings
* add test coverage
* rm functions as they are set as methods in base
* remove superfluous methods
* Fix issue that would occur when a subscription errored and not appending successful subs
* fix after rebase woopsie
* fix linter issues
* fix bug streamline code
* fix linter issues
* fix linter issues
* fix case where it should not change ID if set but append new
* fix whoopsie
* fix websocket tests
* fix readme, fix wrapper issues reporting template, go mod tidy
* add test coverage
* add test coverage and verified futures pariing
* add in futures bypass as its not currently supported on BTSE until API update and implementation
* removed downside/upside profit contract type as its no longer supported. Added in check in set config pairs to warn user of potential conflict and to manually remove or update.
* If asset enabled add pair and increase code coverage
* remove strings.title, set and fetch with strings.Lower but keep struct field exchangename unchanged. Streamline ticker and orderbook code.
* Add code coverage
* log error if setting default currency fails, add code coverage
* address glorious nits
* Addr xtda nits
* fix linter issues
* addr glorious nits
* xtda nits
* Addr glorious nits
* add subscription protection and removed a superfluous wait call
* fix test
* fix whoopsie
* addr xtda nits
* addr glorious nits
* Added asset types to subscriptions structs, also added in error handling for resubscription errors
* consolidated rpc returned type and added in sucessful strings
* dropped stream timing down to 100ms
* DOC changes
* proxy and url usage string additions
* WIP
* go mod tidy rides again
* Addr nits
* Addr nits, fix tests
* fix wording
* add in test case for currency matching
* Add byte length check on outbound websocket payload subscriptions
* addr thrasher nits
* Addr madcozbadd nits
* addr linter issues
* Addr glorious nits by amalgamating function into one mega amazing function.
* fix futures account subscription bug
* addr glorious nits and reinstated wg.Wait() checks
* changed string to currency delimiter string and setconnected by function
