* Currency: Variadic Pairs.Add
This version of Pairs.Add is simpler and [more
performant](https://gist.github.com/gbjk/06a1fc1832d04ee41213ca518938cf74)
Behavioural difference: If there's nothing to add, the same slice is
returned unaltered. This seems like good sauce
* Currency: Variadic Remove
* Common: Add Batch function
* Common: Add common.SortStrings for stringers
* Subscriptions: Add batching to templates
* Subscriptions: Sort list of pairs
* Kucoin: Switch to sub templating
* Kucoin: Simplify channel prefix usage
* Kucoin: Fix race on fetchedFuturesOrderbook
* Subscriptions: Filter AssetPairs
Now only the assetPairs relevant to the subscription are in the context
* Subscriptions: Respect subscription Pairs
* Subscriptions: Trim AssetSeparator early
We want to trim before checking for "AssetSeparator vs All" because a
template should be allowed to reuse a range template and generate just one trailing AssetSeparator
whilst using a specific Asset
* Kucoin: Fix empty margin asset added
* Kucoin: Add Subscription batching
Turns out that contary to the documentation, kucoin supports batching of
all symbols and currencies
* Kucoin: Fix checkSubscriptions and coverage
* Subscriptions: Simplify error checking
This reduces the complexity of error checking to just be "do we get the
correct numbers".
Fixes Asset.All with only one asset erroring on xpandPairs, because we
trimmed the only asset separator, and then errored that we're not
xpanding Assets and the asset on the sub is asset.All
This use-case conflicted with commit 6bbd546d74, which required:
```
Subscriptions: Trim AssetSeparator early
We want to trim before checking for "AssetSeparator vs All" because a
template should be allowed to reuse a range template and generate just one trailing AssetSeparator
whilst using a specific Asset
```
Now we set up the assets earlier, and we remove the check for xpandAssets, since the number of asset lines matching is all that matters.
I've removed the asset tests for this, but they were correctly erroring
on the number of asset lines instead.
Everything hits coverage, as well.
* Kucoin: Remove deprecated fundingBook endpoint
* BTCMarkets: Use common.Batch
* Add in initial handling for quote/base currency deployment requirements
* include client order ID checking
* glorious: suggestions
* spell and fix
* linter/context/test
* rework tests and order side specific requirements
* linter
* mend panic at the disco
* mending more panics at the disco
* anudda fix brudda
* glorious: NITTTTTT BOOOOOMB
* leftover things and stuff
* whoops
* tie in gateio
* glorious: nit fixes life and everything.
* thrasher: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Websocket: Use ErrSubscribedAlready
instead of errChannelAlreadySubscribed
* Subscriptions: Replace Pair with Pairs
Given that some subscriptions have multiple pairs, support that as the
standard.
* Docs: Update subscriptions in add new exch
* RPC: Update Subscription Pairs
* Linter: Disable testifylint.Len
We deliberately use Equal over Len to avoid spamming the contents of large Slices
* Websocket: Add suffix to state consts
* Binance: Subscription Pairs support
* Bitfinex: Subscription Pairs support
* Bithumb: Subscription Pairs support
* Bitmex: Subscription Pairs support
* Bitstamp: Subscription Pairs support
* BTCMarkets: Subscription Pairs support
* BTSE: Subscription Pairs support
* Coinbase: Subscription Pairs support
* Coinut: Subscription Pairs support
* GateIO: Subscription Pairs support
* Gemini: Subscription Pairs support and improvement
* Hitbtc: Subscription Pairs support
* Huboi: Subscription Pairs support
* Kucoin: Subscription Pairs support
* Okcoin: Subscription Pairs support
* Poloniex: Subscription Pairs support
* Kraken: Add subscription Pairs support
Note: This is a naieve implementation because we want to rebase the
kraken websocket rewrite on top of this
* Bybit: Subscription Pairs support
* Okx: Subscription Pairs support
* Bitmex: Subsription configuration
* Fixes unauthenticated websocket left as CanUseAuth
* Fixes auth subs happening privately
* CoinbasePro: Subscription Configuration
* Consolidate ProductIDs when all subscriptions are for the same list
* Websocket: Log actual sent message when Verbose
* Subscriptions: Improve clarity of which key is which in Match
* Subscriptions: Lint fix for HugeParam
* Subscriptions: Add AddPairs and move keys from test
* Subscriptions: Simplify subscription keys and add key types
* Subscriptions: Add List.GroupPairs Rename sub.AddPairs
* Subscription: Fix ExactKey not matching 0 pairs
* Subscriptions: Remove unused IdentityKey and HasPairKey
* Subscriptions: Fix GetKey test
* Subscriptions: Test coverage improvements
* Websocket: Change State on Add/Remove
* Subscriptions: Improve error context
* Subscriptions: Fix Enable: false subs not ignored
* Bitfinex: Fix WsAuth test failing on DataHandler
DataHandler is eaten by dataMonitor now, so we need to use ToRoutine
* Deribit: Subscription Pairs support
* Websocket: Accept nil lists for checkSubscriptions
If the user passes in a nil (implicitly empty) list, we would not panic.
Therefore the burden of correctness about that data lies with them.
The list of subscriptions is empty, and that's okay, and possibly
convenient
* Websocket: Add context to NilPointer errors
* Subscriptions: Add context to nil errors
* Exchange: Fix error expectations in UnsubToWSChans
* initial consolidation of rate limiting code to request package to reduce bespoke code implementation
* continued
* finish abstraction
* lint
* exchanges: fix tests
* linter: fix
* poloniex: fix auth rate limit not being set
* ratelimiter: convert from token to weight
* glorious: nits addressed with fire
* linter: rip
* change func name set -> get
* fix test
* derbit: impl
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Shift wrapper function GetDefaultConfig to exchange.Base method definition, to ensure set defaults doesn't get called twice and to reduce code
* rm alphapoint bootstrap method as is defined as exchange.Base method
* add tests
* glorious: make it a function and make it IBOTEXCHANGE
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
* gateio: fix unmarshal bug and update fields
* gateio: fix wrapper function function, add helper methods
* update order types and add kucoin wrapper fix
* currency pairs
* Add tests
* gateio; inspect error and continue for no funds in account, kucoin: fetch all settlement amounts
* futures: order fixit
* finish off gateio updates for market orders
* cute line
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/gateio/gateio.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/gateio/gateio_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/gateio/gateio_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* glorious: nits - filter by pair match and fix bug where the endpoint returns details instead of message
* Add fix for leverage check (non-merge) my ip has been blocked from gateio still... scammmmmmmm
* glorious: nitters
* Update exchanges/gateio/gateio_test.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update exchanges/gateio/gateio_test.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update exchanges/gateio/gateio_test.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* kucoin: quick batching support for ticker/trades and orderbooks
* fix test
* kucoin: move pieces add commentry
* kucoin: optimise listOfAssetsCurrencyPairEnabledFor and refactor implementations, address specific orderbook channel subscription handling
* glorious: nits
* thx @thrasher-: nits addressed
* rm types and tests that are not needed
* rm subs checking code, and convert to types.Number
* not needed anymore
* fix tests
* set up reader routine to process updates before init a potential slow websocket subscriber
* implement glorious suggestion
* glorious: nitters
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Websocket: Remove IsInit and simplify SetProxyAddress
IsInit was basically the same as IsConnected.
Any time Connect was called both would be set to true.
Any time we had a disconnect they'd both be set to false
Shutdown() incorrectly didn't setInit(false)
SetProxyAddress simplified to only reconnect a connected Websocket.
Any other state means it hasn't been Connected, or it's about to
reconnect anyway.
There's no handling for IsConnecting previously, either, so I've wrapped
that behind the main mutex.
* Websocket: Expand and Assertify tests
* Websocket: Simplify state transistions
* Websocket: Simplify Connecting/Connected state
* Websocket: Tests and errors for websocket
* Websocket: Make WebsocketNotEnabled a real error
This allows for testing and avoids the repetition.
If each returned error is a error.New() you can never use errors.Is()
* Websocket: Add more testable errors
* Websocket: Improve GenerateMessageID test
Testing just the last id doesn't feel very robust
* Websocket: Protect Setup() from races
* Websocket: Use atomics instead of mutex
This was spurred by looking at the setState call in trafficMonitor and
the effect on blocking and efficiency.
With the new atomic types in Go 1.19, and the small types in use here,
atomics should be safe for our usage. bools should be truly atomic,
and uint32 is atomic when the accepted value range is less than one byte/uint8 since
that can be written atomicly by concurrent processors.
Maybe that's not even a factor any more, however we don't even have to worry enough to check.
* Websocket: Fix and simplify traffic monitor
trafficMonitor had a check throttle at the end of the for loop to stop it just gobbling the (blocking) trafficAlert channel non-stop.
That makes sense, except that nothing is sent to the trafficAlert channel if there's no listener.
So that means that it's out by one second on the trafficAlert, because any traffic received during the pause is doesn't try to send a traffic alert.
The unstopped timer is deliberately leaked for later GC when shutdown.
It won't delay/block anything, and it's a trivial memory leak during an infrequent event.
Deliberately Choosing to recreate the timer each time instead of using Stop, drain and reset
* Websocket: Split traficMonitor test on behaviours
* Websocket: Remove trafficMonitor connected status
trafficMonitor does not need to set the connection to be connected.
Connect() does that. Anything after that should result in a full
shutdown and restart. It can't and shouldn't become connected
unexpectedly, and this is most likely a race anyway.
Also dropped trafficCheckInterval to 100ms to mitigate races of traffic
alerts being buffered for too long.
* Websocket: Set disconnected earlier in Shutdown
This caused a possible race where state is still connected, but we start
to trigger interested actors via ShutdownC and Wait.
They may check state and then call Shutdown again, such as
trafficMonitor
* Websocket: Wait 5s for slow tests to pass traffic draining
Keep getting failures upstream on test rigs.
Think they can be very contended, so this pushes the boundary right out
to 5s
* CI/build: Update Go version, linters and fix minor issues
* Bump golangci-lint to v1.56.1
* BinanceUS: Make uint usage consistent
* Throw blank identifiers into the trash
* Exchanges: Remove Pair upgrade handling
Now redundant behind #1401. These paths should never be met.
Several legacy coin upgrade paths being deprecated as well: ZUSD and CNY
Expecting any users with bad config from 3+ years ago would have to
reset anyway.
Also: At the time the intention of this was to upgrade the config
format.
However now, instead, it'd mostly serve to reset enabled pairs if
there's a config mistake, which doesn't feel right.
* Kraken: Fix typo in Kraken type struct
* Exchanges: Abstract exchange Start() and Run()
* Exchanges: Add test for abstracted Start
* Exchanges: Move Start to Bootstrap
* Simplify waitgroup usage
* Add call to exchange.Bootstrap to allow overide or supplementation
* Exchanges: Concurrent common bootstap actions
* Gateio: Remove incorrect Run in test
* GateIO: Fix pair dependencies in tests
This ensures that the pairs are initialised no more than needed and
kind-of just-in-time.
Better pattern might be to use a function to get these pairs when we
need them.
* Exchanges: Complete UpdatePairs before ExecLims
If we're going to update pairs, it needs to complete before we check for
limits to avoid errors on old pairs
* Exchanges: Remove Start and Run from tmpl
Since they're replaced by bootstrap now and shouldn't need customisation
normally
* Alphapoint: Move Start to Bootstrap
* GateIO: Fix linter shadow var
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* adds open interest to exchanges
* ADDS TESTING YEAH
* New endpoints, BTSE, RPCS, cached
* slight design change, begin gateio
You will need to get cached for
each exchange that supports it
* gateio, huobi, rpc
* fix up kraken, cache retrieval
* okx, gateio
* finalising all implementations and tests
* definitely my final ever commit on this
* Well, well, well
* final v2
* quick fix of bug
* test coverage, assert notempty, test helper
Added a new testhelper for currency
management because its very annoying
in a parallel test setting which wastes
so much space otherwise
* minimises REST requests for Open Interest
* types.Number merge misses
* Minimises Kraken REST calls
* len change, value -> pointer receiver
* further fixup
* fixes gateio, batch calculates open interest
* single gateio, lint const fixes
* rejig and more thorough oi for huobi
* formatting expansion
* minor fix for handling expiring contracts
* rm unused Binance strings
* add bybit support, fix bybit issues
* oopsie doopsie, dont look at my whoopsie
* Fix issue, remove feature
* move an irrelevant function for the pr
* mini bybit upgrades
* fixes cli request bug
* Kucoin: Fix ProcessMarketSnapshot and add a test
* Kucoin: ProcessMarketSnapshot: move the check before the ticker
* Kucoin: remove time.sleep from the test, add if statement to processmarketSnapshot
* Kucoin: ProcessMarketSnapshot to send margin, spot and both margin and spot pair data
* Kucoin: range over listOfAssetsCurrencyPairEnabledFor which returns a slice
* Kucoin: linter fix and pointers placed
* Kucoin: removed AssetWebsocketSupport and ku.CurrencyPairs.IsAssetEnabled, linter error fixed, comment amended
* kucoin: fix unmarshal bug
* kucoin: Add time in force handling
* kucoin: fix test
* thrasher: nits
* kucoin_test: shift skip check down for coverage, rm market testing, change buy price to reduce chance of instant match
* kucoin: fix nits and force usage of uuid to rm conflicts
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
* cmd/exchange_template: Add wrapper function
* exchanges: force UpdateOrderExecutionLimits to wrappers as this is important for order deployment
* kucoin: Add spot order execution limits
* linter: fix
* glorious: nits
* kucoin: change from name to symbol for correct fee fetching and order deployment
* WHAAAAAAAT says Vitalik
* kucoin: Add futures limit support, fix insertion of non margin tradable pairs, update naming and add comments.
* kucoin: implement master branch changes
* Update exchanges/kucoin/kucoin_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* kucoin/test: update commentary
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* adds funding rate implementations and improvements
* merge fixes x1
* lint
* kucoin funding rates func make
* migrate sync-manager to keys
* some kucoin work
* adds some kucoin wrapper funcs
* ehhh, todo
* kucoin position
* start of orders
* adds the kucoin tests yay
* multiplier
* nits, EWS includes order limits
* NotYetImplemented, IsPerp improvements, cleaning
* lint, test fix, huobi time
* fixes issues, improves testing
* fixes linters I WRECKED
* local lint but remote lint, lint, lint, lint
* fixes err
* skip CI
* lint
* Supported rates, binance endpoints
* fixes weird mocktest problems
* no, CZ is invalid
* fixes some new EWS test errors
* all in a days work
* cleanup
* cleanup for real, also stop it binance.json
* minor coverage
* adds gateio to the slurry
* cleanup of types
* verbose verbose verbose verbose verbose verbose
* fixes huobi parsing issue
* fix bybit contract identification
* cleanup
* merge fixes
* addresses many big problems raised by SHAZ
* tracking errors and fixes
* funding rate if avail, fixes currency formatting
* Addresses nits and sneaks in extra fixes
* lint
* minor fixes after rebase
* better contract splitter for currencies like T-USDT
* forgot to add the exchange name like a fool
* merge fixes x1
* kucoin, direction, contract size
* rn direction, fix kucoin time
* WHOOPS
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* misdirection
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* init
* updates config
* wrapper configuration
* updates exchange readme
* adds SendAuthHTTPRequest and SendHTTPRequest
* adds ratelimit file
* adds test case and minor fixes
* improve error handling
* update testcases and improve GetSymbols API
* adds SPOT API's
* minor fix
* WIP
* WIP
* adds test case
* adds check in test case
* fixes in Auth. HTTP
* improvements
* adds trade, kline support and testcases
* adds SPOT API and testcases for same
* adds SPOT API and testcases
* adds SPOT API and testcase
* WIP
* adds API's
* adds API's
* adds test cases
* adds comment to exported data types
* adds API and test cases
* adds API
* adds API
* rearrange functions
* WIP: adds API
* adds API for Post Order SPOT
* adds API and few fixes
* fixes
* WIP
* WIP
* add PostBulkOrder API and its test case
* fix issues
* adds cancel order APIs and test cases for same
* add minor test fixes
* add API
* adds API
* fixes
* add API
* adds API and test cases
* fix test
* adds API
* adds test
* fix test
* adds API and test
* adds deposit API and test cases
* WIP
* adds API and test cases
* WIP
* WIP
* add public future API and test cases
* WIP
* remove v2 API and replace them with v1
* update test cases
* adds future order API and test cases
* adds futures order API
* adds API
* add API and test cases
* adds API and test cases
* adds API and test cases
* adds API and test cases
* Adding wrapper functions
* Fix on wrapper function
* Adding websocket support
* Complete addressing WS push datas
* Adding spot push data unit tests
* adding futures websocket push data handlers
* Adding futures websocket push data handlers
* Added unit tests
* Updating unit tests
* Updating wrapper and unit test functions
* Adding missing wrapper functions and code cleaning up
* Resolved linter issues
* Fixing websocket issues
* Fixing websocket issues
* Slight fix on config_example file
* Minor update
* Basic nits updates
* Fix minor linter issues
* Minor update
* Minor unit test update
* Minor unit test update
* Code update and linter issues fix
* Removed unnecessary type conversion codes
* Monor update based on review comment
* Fix based on review comments
* Adding rate-limiter
* Websocket update and overall minor fixes
* Removed IsAssetTypeEnabled method implementation
* Fix connection and formatting issues
* Updating orderbook issues
* Very minor label fix
* Minor error returning fix
* code cleaning up and minor spelling fix
* Updates on unit test
* Update on unit tests and slight code structure
* unit test update
* orderbook update and minor fix
* fix on race
* Mini linter fix
* fix minor parameter and unit test issues
* handler funcs and models update
* Fixing websocket and unit test issues
* order side string for active orders
* Fix on websocket and unit tests
* Minor type changes
* Minor Orderbook fix and unit test update
* Small fix on orderbook
* Updating orderbook functionality
* FIx on websocket orderbook handlers
* Small update on kucoin websocket
* fix missed review comments
* fix based on review comments
* Updating websocket orderbook and fixing unit tests
* Minor fixes
* unit test update
* Updating unit test according to enabled asset type
* toggle canManipulateRealOrders const
* Unit test update
* Fix minor issues
* minor fix
* documentation fix
* wrapper coverage and unused params fix
* testing and minor changes
* documentation, websocket and unit test update
* minor linter fix
* Websocket spot/margin subscription update
* minor ticker update fix
* minor fixes on endpoints
* timestamp and number convert method and unit tests
* timestamp convert minor update
* minor type and conversion fix
* create a common timestamp convert and fix minor issues
* linter and ticker fix
* Updating unit tests and order placing endpoint methods
* Added a pairs check
* Fix config test error
* rm unused error variable
* Fix source of linter issue
* code update: convert, wrapper and websocket fix
* minor code update
* Websocket code and unit tests update
* Websocket ticker ask/bid type change and small error msg fix
* docs update
* fix: websocket orderbook handling
* change orderbook channel to marketOrderbookLevel2Channels and fix websocket orderbook update
* Minor func rename and reciever change
* Minor orderbook unit test issue fix
* comment: about why we used a random delimiter '-' for futures
* update config files and FetchTradablePair func for futures pairs
* futures config pairs update
* remove ConnextionMonitorDelay from websocket setup
* fix on types and futures pair conversion
* updating config pairs
* change NewPairFromString to DeriveFrom
* unit tests update
* unit tests update
* Added TickerBatching
* added GetStandardConfig to GetDefaultConfig
---------
Co-authored-by: Jaydeep Rajpurohit <jaydeeppurohit1996@gmail.com>
