* Binance: Fix subscription failures ignored
* Testing: Fix race on shared config singleton
* Config: Privatise Global config var
We should *either* use a private var *or* use an accessor, but it
doesn't make sense to mix paradigms.
Since GetConfig() is well established this instead removes the limited uses of direct public access and adds a Setter
* Zip: Fix test failure on http mocks
* Exchanges: Remove Pair upgrade handling
Now redundant behind #1401. These paths should never be met.
Several legacy coin upgrade paths being deprecated as well: ZUSD and CNY
Expecting any users with bad config from 3+ years ago would have to
reset anyway.
Also: At the time the intention of this was to upgrade the config
format.
However now, instead, it'd mostly serve to reset enabled pairs if
there's a config mistake, which doesn't feel right.
* Kraken: Fix typo in Kraken type struct
* Exchanges: Abstract exchange Start() and Run()
* Exchanges: Add test for abstracted Start
* Exchanges: Move Start to Bootstrap
* Simplify waitgroup usage
* Add call to exchange.Bootstrap to allow overide or supplementation
* Exchanges: Concurrent common bootstap actions
* Gateio: Remove incorrect Run in test
* GateIO: Fix pair dependencies in tests
This ensures that the pairs are initialised no more than needed and
kind-of just-in-time.
Better pattern might be to use a function to get these pairs when we
need them.
* Exchanges: Complete UpdatePairs before ExecLims
If we're going to update pairs, it needs to complete before we check for
limits to avoid errors on old pairs
* Exchanges: Remove Start and Run from tmpl
Since they're replaced by bootstrap now and shouldn't need customisation
normally
* Alphapoint: Move Start to Bootstrap
* GateIO: Fix linter shadow var
* Websockets: Fix subscription failure on reconnect
If a websocket is disconnected then the subscription map was left with
old subscriptions, causing:
`Okx websocket: subscription failure, channel already subscribed for ...`
* fixup! Websockets: Fix subscription failure on reconnect
Fixes review comment https://github.com/thrasher-corp/gocryptotrader/pull/1457#discussion_r1468947509
* Bitfinex: Handle Errors in tickers without panic
* Bitfinex: Use TypeAssertError for tickers
* Bitfinex: Refactor and improve ticker handling
* Unify Ticker response handling
* Simplify/Humanify errors in parsing ticker responses
* Remove polymorphic response handling for < 10 fields, seems [antiquated according to docs](https://docs.bitfinex.com/reference/rest-public-ticker)
* Add test coverage for tickers
* Bitfinex: Ignore resp format errs in GetTickers
We're still getting:
`received 'invalid ticker response format for tALT2612:USD field BidSize
from [100 <nil> 100 <nil> <nil> <nil> <nil> <nil> <nil> <nil>]`
too frequently right now.
Considered:
* Special casing tALT2612:*; However if it's happening with this curr
it'll probably happen again
* Warning about the error; However it'd just be persistent,
unactionable and annoying noise in the logs of a running server
So the conclusion is to just silently ignore it
* Bitfinex: Accept locked market in TestUpdateTicker
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* adds open interest to exchanges
* ADDS TESTING YEAH
* New endpoints, BTSE, RPCS, cached
* slight design change, begin gateio
You will need to get cached for
each exchange that supports it
* gateio, huobi, rpc
* fix up kraken, cache retrieval
* okx, gateio
* finalising all implementations and tests
* definitely my final ever commit on this
* Well, well, well
* final v2
* quick fix of bug
* test coverage, assert notempty, test helper
Added a new testhelper for currency
management because its very annoying
in a parallel test setting which wastes
so much space otherwise
* minimises REST requests for Open Interest
* types.Number merge misses
* Minimises Kraken REST calls
* len change, value -> pointer receiver
* further fixup
* fixes gateio, batch calculates open interest
* single gateio, lint const fixes
* rejig and more thorough oi for huobi
* formatting expansion
* minor fix for handling expiring contracts
* rm unused Binance strings
* add bybit support, fix bybit issues
* oopsie doopsie, dont look at my whoopsie
* Fix issue, remove feature
* move an irrelevant function for the pr
* mini bybit upgrades
* fixes cli request bug
This test was failing with `-tags mock_test_off` because the API imposes
a default limit of 500 now, so we'd just get 500 trades and no batching.
If the user doesn't provide a limit, that means we need to assume
batching
* Adding Bybit public endpoints
* Completed adding market endpoints
* Added trade endpoints
* Adding position endpoints
* completing position endpoints
* Adding Pre-upgrade endpoints
* Completed adding Pre-upgrade and Account endpoints
* Added asset endpoints
* Added user endpoints and unit tests
* Adding spot leverage and margin trade endpoints
* spot margin trade added
* added spot-margin-trade, institutional lending, c2c lending, and broker
* Adding wrapper funnctions
* Working on wrapper public methods
* Added wrapper functions and unit tests
* Added websocket support with unit tests
* Update websocket handlers and added rate-limiter
* wrapper function, websocket handlers, and linter issues fixe
* unit tests fixes and codespell correction
* Update documentation
* Minor websocket handling fix and URL consts merging
* types, unit test other updates
* Updated websocket and methods based on review
* Added GetFeeByType method with unit test and fixes
* add filter for Unified and Normal endpoints
* Mock recording and unit tests update
* minor linter issue fix
* websocket and rest tests and fix
* change asset types and wrapper methods update
* rm: forgotten panic message
* endpoints, websocket and unit tests update
* Added and updated endpoints and unit test
* linter and spell fix
* unit test and orders update
* Update on endpoints, fields, config pairs and formating, and unit tests
* minor update on responses
* Fix unit test and types
* Unit tests, models, and wrapper issues fix and mock test recording
* rm print statement
* Fix issue, add FundingRate wrapper func, mock record
* minor type and unit test update
* Update on order handling and unit test
* Minor test
* Minor fix in wrapper
* unit tests update, recording, and documentation update
* Unit tests and minor wrapper function update
* minor unit test fix
* Added newly added endpoints, unit tests, and mock recording
* Rename GetInstruments -> GetInstrumentInfo
* doc update
* Minor unit tests update
* Minor unit test and wrapper update
* Fix linter issue
* Add unit test and minor updates
* Revert websocket error declaration
* Revert websocket error declaration
* Balace --> Balance
* Fix config issues
* Added next funding time minor fix
* Update GetLatestFundingRates and record mock test data
* Added LatestFundingRate time
* Fix test issue of TestAllExchangeWrappers
* config pairs update
* configtest spot pairs update
* Minor update on options UpdateOrderExecutionLimits wrapper func
* Linter issue fix and added new currency codes
* Added new currency codes
* Update bybit pairs in config_example
* config assets pair format update
* Bitfinex: Fix TestUpdateTickers on ICE
Accept 5% failure rate of available pairs not working as tickers.
When Bitfinex [delisted ICE](https://www.bitfinex.com/posts/990) it's still coming back in all pub:conf and pub:info listings:
```
❯ curl -s https://api.bitfinex.com/v2/conf/pub:info:pair | jq -c '.[0][] | select(.[0] | test("(BTC|ICE|ZIL)USD")) ' ["BTCUSD",[null,null,null,"0.00006","2000.0",null,null,null,0.1,0.05,null,null]]
["ICEUSD",[null,null,null,"4.0","25000.0",null,null,null,null,null,null,null]]
["ZILUSD",[null,null,null,"40.0","1500000.0",null,null,null,null,null,null,null]]
```
_( I included ZIL to show a tradable pair without Margin fields )_
There's absolutely no sign it's not a tradable pair _until_ you ask for a ticker for it:
```
❯ curl -s https://api.bitfinex.com/v2/ticker/tICEUSD ["error",10020,"symbol: invalid"]⏎
❯ curl -s https://api.bitfinex.com/v2/ticker/tBTCUSD [42854,11.8920918,42855,12.71095442,-290,-0.00672292,42846,725.08132142,43288,41850]⏎
```
* fixup! Bitfinex: Fix TestUpdateTickers on ICE
* fixup! Bitfinex: Fix TestUpdateTickers on ICE
* Bitfinex: Fix UpdateTickers stopping on first error
* Types: Add Number type
* Types: Switch StringToFloat64 for Number
This change mostly just renames the type.
convert package and StringToFloat64 represent actions, not types,
and make it misleading to use outside of the API context,
especially when using it for a Float64ToString operation.
* Common: Remove StringToFloat64
Replaced by types.Number
* fixup! Types: Switch StringToFloat64 for Number
Second pass at Okx
* Spellcheck: Fix whitespace handling for okx line
* Orderbook: Fix test failures on different arch
Fixes floating point inaccuracies on different architectures
Moves the depth tests over to table driven tests
* Kline: Fix test failures on different arch
* BTSE: Fix duplicate error on Million pairs (M_*)
BTSE has listed Pitbull token with two symbols:
PIT-USD and M_PIT-USD for millons of PIT / USD.
The native token is not tradable, so we ignore them and
get a base of M_PIT because that's what later APIs will accept
* BTSE: Fix test errors on locked market
* Common: Improve AppendError and ExcludeError
This change switches from a stateful multiError to caring more about the
Unwrap() []error interface, the same as [go standard
lib](https://github.com/golang/go/blob/go1.21.4/src/errors/wrap.go#L54-L68)
Notably, if we implement Unwrap() []error and do NOT implement Is() then
we get free compatibility with the core functions.
The only distateful thing here is needing to deeply unwrap fmt.Errorf
errors, since they don't flatten. I can't see any way around that
* Pairs: Fix exchange config Pairs loading
When a pair string contained two punctuation runes, the first one is used,
and the configFormat is ignored.
This fix checks the list and corrects any with the wrong delimiter, or
errors if the format is inconsistent.
* BTSE: Fix all tickers retrieved by GetTicker
PR #764 introduced GetTickers, but it wasn't rolled out to BTSE.
This fix ensures that when one ticker is a locked market, the rest continue to
function. Particularly important if the locked market wasn't even
enabled anyway.
* Kucoin: Fix test config future pairs
* BTSE: Remove PIT tests; Token removed
BTSE have removed the PIT token pairs
All these changes stand, and this just removes the test
* ITBit: Fix fatal error on second run
This fix removes incorrect config pair delimiter, because it would be
re-inserted into config the first run, and then error the second time.
This delimiter doesn't match the config we have.
There's no implementation of fetching pairs, so what's in config files
now is all that matters
* Engine: Fix TestConfigAllJsonResponse
* Clarity of non-matching json improved
* Handling for fixing pair delimiters
* Okx: Remove UpdateTradablePairs from TestMain
When running individual tests we do not want to be forced to update
trading pairs.
It also does not seem to be required, since disabling UpdateTradingPairs
entirely doesn't stop any tests from passing.
If it is required we can enact this pattern:
```
func TestUpdateTradablePairs(t *testing.T) {
t.Parallel()
updatePairsOnce(t)
}
var updatePairsGuard sync.Once
func updatePairsOnce(tb testing.TB) {
tb.Helper()
updatePairsGuard.Do(func() {
err := ok.UpdateTradablePairs(context.Background(), true)
assert.NoError(tb, err, "UpdateTradablePairs should not error")
})
```
* Okx: Fix GetBlockTrades url
Endpoint was wrong
Not convinced we should prefix with market vs public, but not
committing a driveby
* Okx: Expand test coverage for GetBlockTrades
* Okx: Fix GetPublicBlockTrades
Was marked as an authenticated API call, and it's not.
Also renames it because without the context of "Block" (or RFQ) it's
misleading.
Adds tests.
* Okx: Fix GetPublicBlockTrades to be public
Expand coverage of GetBlockTrade and GetPublicBlockTrades
* Kucoin: Fix unmarshalling of FuturesTicker resp
* Fix several string float64 fields not unmarshalling
* Fix time field misnamed; Make a time.Time
* Use order.Side for sides
* Add tests
This change opts to expose float64 instead of StringToFloat64 because
there's no wrapper to convert the type over, and it's not a websocket.
Essentially choosing to not expose internal convert types for methods
called directly.
Possible we'll eventually harmonise this with a types.Number or
something.
* Kucoin: FuturesRealTimeTicker => FuturesTicker
Kucoin only call it RealTime in the first sentence of their docs. None of the API names, endpoints or any thing mention RealTime.
This is just a ticker
* Tests: Improve clarity of failed push data
* Kucoin: Move PushData to a fixture file
This avoids both the linter errors, and the bloat.
Loses the name of the "test", but I think that's okay
* Okx: Fix GetInsuranceFundInformation "" resp
When amount is "" this was erroring
* Test: Standardise configtest.json
Simple jq formatting of configtest
git diff -w or github ignore whitespaces should show no changes.
Any conflicts, just accept --ours and reformat it. Or not :o)
* Kucoin: Fix ProcessMarketSnapshot and add a test
* Kucoin: ProcessMarketSnapshot: move the check before the ticker
* Kucoin: remove time.sleep from the test, add if statement to processmarketSnapshot
* Kucoin: ProcessMarketSnapshot to send margin, spot and both margin and spot pair data
* Kucoin: range over listOfAssetsCurrencyPairEnabledFor which returns a slice
* Kucoin: linter fix and pointers placed
* Kucoin: removed AssetWebsocketSupport and ku.CurrencyPairs.IsAssetEnabled, linter error fixed, comment amended
* kucoin: fix unmarshal bug
* kucoin: Add time in force handling
* kucoin: fix test
* thrasher: nits
* kucoin_test: shift skip check down for coverage, rm market testing, change buy price to reduce chance of instant match
* kucoin: fix nits and force usage of uuid to rm conflicts
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
* cmd/exchange_template: Add wrapper function
* exchanges: force UpdateOrderExecutionLimits to wrappers as this is important for order deployment
* kucoin: Add spot order execution limits
* linter: fix
* glorious: nits
* kucoin: change from name to symbol for correct fee fetching and order deployment
* WHAAAAAAAT says Vitalik
* kucoin: Add futures limit support, fix insertion of non margin tradable pairs, update naming and add comments.
* kucoin: implement master branch changes
* Update exchanges/kucoin/kucoin_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* kucoin/test: update commentary
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Bitfinex: Replace errTypeAssert with common.GetTypeAssertError
* Bitfinex/common.GetTypeAssertError description to match the documentation
* Bitfinex/Correct typos, fix type in finalResp error
* Bitfinex: Comments amended from.Symbol to .Data
* Bitfinex: fix the typo
* Bitfinex: fix the comments
* adds funding rate implementations and improvements
* merge fixes x1
* lint
* kucoin funding rates func make
* migrate sync-manager to keys
* some kucoin work
* adds some kucoin wrapper funcs
* ehhh, todo
* kucoin position
* start of orders
* adds the kucoin tests yay
* multiplier
* nits, EWS includes order limits
* NotYetImplemented, IsPerp improvements, cleaning
* lint, test fix, huobi time
* fixes issues, improves testing
* fixes linters I WRECKED
* local lint but remote lint, lint, lint, lint
* fixes err
* skip CI
* lint
* Supported rates, binance endpoints
* fixes weird mocktest problems
* no, CZ is invalid
* fixes some new EWS test errors
* Websockets: Add keys to websocket subscriptions
* This switches all RO uses of the mutex to use a RLock method.
* The mutex used for discrete field access has had scope drift from
name 'connectionMutex' so rename to more appropriate fieldsMutex
* The mutex used for Set/CanUseAuthEndpoints moves from the
subscriptions endpoint to the fieldsMutex
* Add GetSubscription by key
* Expose stream.Matcher type
* Bitfinex: Subscribe and Unsubscribe atomicly
* Fix Auth failures ignored
* This change makes it so that Subscribe and Unsubscribe wait for success
** Tells the DataHandler about errors
** Errors are returned to consumers
* Subscribes concurrently to the channels
* It also simplifies the chanId to stream mapping
* Removes unable to locate chanID: %d errors which are just noise
* Paves the way for unified channelSubscription id handling
* Adds support for subId for Book subscriptions, which is more robust
* Vastly simplifies what we need to test TestWsSubscribedResponse
This test was working to ensure that the various fancy key parsing
mechanisms all worked. Now that we use subId, we just need a thorough
test of that
* Expose Match.Set in order to capture websocket incoming data
Can't see another way of doing this. Doesn't seem too bad
* Allow tests to run with auth or WS
These flags made it difficult to run the tests whilst working on
websockets
* Enable API auth and WS in testconfig
This change minimises the changes requires for a full test run against
live endpoints, so that new contributors have a clearer testing path.
I cannot see any reason to turn WS off and Auth endpoints off when we're
not going to run API tests without Creds being set, and we're not going
to do live fire tests without canManipulateRealOrders
* TestWsSubscribe and various fixes
** Enables the websocket for live non-authed integration tests by default
** Adds an integration test for subscriptions
** Changes the Ws tests to respect canManipulateRealOrders
** Uses WsConnect instead of setupWs; fixes seqNo config not sent for WS tests
** Allows api creds to live in config/testdata.json which might be
less likely to accidentally commit, and less obtrusive
* Bitfinex: Support period and timeframe for Candles
* Fixes manual Subscribe() symbol or key formatting
* Unifies handling of params for DefaultSubscriptions and manual
subsrciptions
* Bitfinex: Handle conf and info WS channel events
* Bitfinex: Better tests for subscriptions
* fixup! Websockets: Add keys to websocket subscriptions
* fixup! Bitfinex: Subscribe and Unsubscribe atomicly
* fixup! Websockets: Add keys to websocket subscriptions
* Websockets: Add Pending subscription status
Add a status tracker so that Sub/Unsub can prevent duplicates,
and also fixes when first message comes before we have added the sub
to the tracker
* Websockets: Add State instead of pending
This change allows more clarity about the current state and
checks for specifically already Unsubing
* Bitfinex: Fix first sub message maybe lost
The only link we have between a sub req and the sub resp is the subID.
And the only link we have between a sub message and the sub is the chanID.
We can't derive a link using Pair or anything else.
This meant that by sending the resp and its chanID down the IncomingData
channel, we allowed the channel reader to maybe process the next
message, the first message on the channel, before the runtime executed
the switch back to subscribeToChan waiting on the chan.
To fix this, we key initially on subId.(string), and then replace it
with chanId.(int64) when we have it *inside* the wsHandleData so we
know we've procedurally handled it before the next message.
subscribeToChan is then free to remove the subId keyed Sub regardless of
error or not
If there's an error, we don't need to inline handling because there
won't be any second update.
Expands test coverage to make sure those subId keyed subscriptions are
removed.
* Websocket: Validate state in SetChanState
* fixup! Bitfinex: Fix first sub message maybe lost
* Websockets: Rename RemoveUnsuccessfulSubs
Implementation doesn't imply Unsuccessful or need to.
This change supports the registering of Pending subs
* Bitfinex: Fix race in Tests
* okx: books 5 (cherry-pick)
* okx: shift types to types file, remove commented code and updated field name to better reflect pushed type
* linter: fix
* remove slowness
* * Introduce function checksubscriptions and shift check of subscriptions to internal websocket package
* Shift Max websocket connection int to Websocket setup (temp) for this use case only.
* glorious: nits
* linter: fix
* websocket: don't try and subscribed with nothing to subscribe to.
* Update exchanges/stream/websocket_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Bitstamp: WIP fixing trading fees
* Bitstamp/amended the TestGetFee test and currected the getTradingFee function
* Bitstamp: TestGetFee implemented for maker and taker
* Bitfinex: added a wrapped error
* Bitstamp: GetTradingFee and test updated, fetched from the API
Progresses #1271
* Bitstamp: minor changes- whitespace removal and comment added
* Bitstamp: fixed lint issues in TestGetBalance and TestGetTransactions
* Bitstamp:Typo in types TradingFee comment
* Bitstamp: GetAccountTradingFees at view the fees on all pairs
modified: exchanges/bitstamp/bitstamp.go
* Bitstamp: returning the TradingFee info instead of just MakerTakerFees
* Bitstamp:TestGetAccountTradingFees + TestGetAccountTradingFees added,data structure amended to match the outcome
* Bitstamp:error and a test for empty pair added in GetAccountTradingFee
* Bitstamp: RM the whitespace linter error
* Okx: Fix WS order fields
* Fixes float64 with string annotation erroring on empty strings:
Okx Order Push Data error json: invalid use of ,string struct tag, trying to unmarshal "" into float64
Specifically this came from px field from a market order
* Switch to convert.StringToFloat64 instead of okxNumericalValue
* Fix typo in Notional* field names; Ironically prevented them from erroring
* Okx: Add tests for first order fields
* Okx: CID and maybe set WS order Filled time
* Tests: Set TestFixtureToDataHandler to t.Helper
* Orders: Add UnmarshalJSON to order.Side
* Okx: Fix FillTime not parsed for PendingOrder
* Okx: Switch to order.Side Unmarshal throughout
* Okx: Add Fee and FeeAsset to order processing
* Okx: Fix WS order.Detail amounts and Test
This fixes Amount vs QuoteAmount for market sells where tgtCcy is
quote_ccy
* Add comment to order.Side.UnmarshalJSON
* Okx: Replace PendingOrderItem Unmarshal with local types
* Okx: string type for WS order reduceOnly
Note: Not yet in unit tests, since it's not part of the spot tests I was
originally fixing. I'll circle back to adding full test support for
Reduce only and deleveraging positions.
* Okx: Fix TestOrderPushData Amount
We were expecting 0 when we're given a quoteAmount
In reality, we'll calculate the size from the price
* Okx: Fix order and remAmount in wsOrders
Improved handling for Float64 issues and boundaries when the order is
fully executed but not yet marked as Filled
* Fix ErrSideIsInvalid in tests
* OrderManager: Fix race condition in submit with ws
If the ws sees the order before processSubmittedOrder then it will have
assigned it an internal order id already and added it to the store.
Don't treat that as an error. Instead just use the newer ws details
* OrderManager: Fix error comparisson
Should always use errors.Is when possible
* Tests: Simplify btcusd test pair declaration
* OrderManager: Improve test readability
* OrderManager: Add orderstore.getByDetail test
* Return a fresh pointer from orderstore.getByDetail
This protects the order.Details in the store from direct access.
The use-case was to allow the returned objects to be references so that
future changes to them would be reflected.
However we're not ready yet to allow people to touch the orders
directly, because they're not protected directly by a mutex, and nothing
would stop consumers contaminating the integrity of the data.
We can revisit this topic later atomicly, but it's definitely tangental
to the cause of action for PR #1336.
* Fix GetByDetail tests to assert a new pointer
* OrderManager: Avoid possible lock races
This fix internalises the getByDetail because the implication of moving
lock ownership out of exists/getByDetail to consumers breaks the order
store struct encapsulation in a way we really don't want to.
It's also more efficient
* Fix spelling mistake
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* OrderManager: Fix TestSubmitOrder... description
* OrderManager: Improve clarity of comment
* OrderManager: Capitalise error message
On failure to add to orderstore, capitalise the error message
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
---------
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Bitstamp: Add auth channel subscription handling
* Bitstamp: Avoid searching for asset type
We've hardcoded asset.Spot in order to find the pair.
Looking the asset up from the pair makes no sense.
* Bitstamp: Add type for wsOrders
* Bitstamp: Working test of Generic DataHandler
* Bitstamp: WS Order chan tests and remove type
orderType could be derived from status == New and Buy & price == 9+e9 or Sell & price == 0
But it would only be true for the first update and it really doesn't feel worth the risk
Consumers are going to have to merge to original request anyway
* Bitstamp: Linter fixes
* Kraken: Switch to shared fixture test
* Bitstamp: Fix lint on TestFixtureToDataHandler
* Engine: Add Clone for PairsManager
go-vet highlighted that the mutex here is a value when we copied the
PairsManager in a test.
Options to fix:
* Add a deep clone method to PairsManager
* Add a shallow clone method with a disclaimer
* Make the mutex a pointer
* Make the PairsManager itself a pointer
Options 3 and 4 are too invasive to justify changing at this point.
There's an inherent risk of PM being passed by value, but govet should
catch the copylock.
There's more risk in changing everything to use a pointer at this stage.
* Engine: Fix linter again, ironically
* Bitstamp: Rename OHLC const
* Bitstamp: Minor fixes to syntax
* Bitstamp: Simplify chanSymb=>pair
* Bitstamp: Still process order updates without ID
If there's a ClientOrderID we'll still process the order.
It doesn't seem likely we'd have this happen, but if it does we still
want consumers to get something.
* Bitstamp: Replace Clone with Lock methods
* Engine: Expose PairsManager's Mutex
Makes more sense than wrapping functions
* Bitstamp: Fix linter copylock (again)
* fixup! Engine: Expose PairsManager's Mutex
Omit Mutex from Json
* fixup! Bitstamp: Add auth channel subscription handling
Remove unused wsAuthToken
* Bitstamp: Simplify OrderData Unmarshal
* Bitstamp: Remove unused contexts
I added these following best practices, but the reality is that when/if
we get context awareness in GCT, there will be a lot more to fix and
this will be a drop in the ocean anyway.
* Bitstamp: Only call handleWSOrder for MyOrders
* Bitstamp: Avoid allocating again in handleWSOrder
* CurrencyPairs: Remove public mutex
Simplified to a Load method to avoid making mutex public
* Tests: Improve test readability and clarity
* Bitstamp: Wrap errWSPairParsingError
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Bitstamp: FetchWSAuth mock and live test
---------
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* moves everything to use single map keys, also breaks
* full rollout
* tests
* fix a little bug
* minor test fixups
* Fix Key use
* rm 🔑 from 🔑 struct name
* all in a days work
* cleanup
* cleanup for real, also stop it binance.json
* minor coverage
* adds gateio to the slurry
* cleanup of types
* verbose verbose verbose verbose verbose verbose
* fixes huobi parsing issue
* fix bybit contract identification
* cleanup
* merge fixes
* addresses many big problems raised by SHAZ
* tracking errors and fixes
* funding rate if avail, fixes currency formatting
* Addresses nits and sneaks in extra fixes
* lint
* minor fixes after rebase
* better contract splitter for currencies like T-USDT
* forgot to add the exchange name like a fool
* merge fixes x1
* kucoin, direction, contract size
* rn direction, fix kucoin time
* WHOOPS
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* misdirection
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Okx: Remove redundant asset types from conversion
* Okx: Fix list of private channels for subscription
* Okx: Fix ws order update Acc and Rem amounts
The amounts aren't treated as deltas by anything receiving them
upstream, e.g. orderManager or wsRoutineManager.
So we should treat them the same as the REST implementation
* Okx: Add context to stream unmarshall errors
I encountered a series of errors with unmarshalling from okx and have no
idea what the messages which weren't valid json actually were.
This fix adds the raw message for context to the error
* Okx: Reduce ping interval
Seeing occassional disconnects and suspect dropping the ping interval
down might help
* Fix ClientSupplier and ClientSupplied inconsist
This simply removes the Supplie. part in favour of the simpler name used
in binance. Seems safe since its already inconsistent and not populated
in at least ws order handlin
* Okx: Fix ClientOrderID ignored in ws orders
* Okx: Standardise Rfq abbrev; Fix RfqIDs
* Okx: Fix RfqIds outside of ClientRfqIds
* Okx: Simplify TestUpdateOrderExecutionLimits
* Okx: Fix panic on no avgPrice and QuoteAmount
