* build/ci: Update Go to v1.24, golangci-lint to v1.64.5 and fix issues
* Address shazbert's nitters
* linter/config: Fix new linter issue and use versionSize const
* Address gk's nitters and fix additional linter issue after rebase
* Address glorious nits
* staticcheck: Fix additional linter issues after upgrading to Go 1.24.1 and golangci-lint v1.64.6
Also addresses nits
* Improve testing, assertify usage and use common.ErrParsingWSField
* TestCreateNewStrategy: Replace must > should wording
* Send trades down the DataHandler
When the tradeFeed is enabled, send the trades down the DataHandler
Add TestWSProcessTrades
* Update assertions
* Add check against null references in slices
* Add an error for ws parsing field to common
* Update kraken websocket ProcessTrades
Send individual trades down the DataHandler
Send multiple trades in test
Test error if the trade length is too short
Nits
* Fix nits
* tag optional sonic and allow full library conversion
* Add workflow and disallow arm and darwin usage
* Add basic hotswap benchmark
* linter: fix
* use bash
* linter: fix?
* Fix whoopsie, add to make file, also add mention in features list.
* test enforcement
* actually read documentation see if this works
* linter: fix
* linter: fix
* sonic: bump tagged version
* encoding/json: drop build tag arch and os filters
* encoding/json: consolidate tests
* encoding/json: log build tag usage
* rm superfluous builds
* glorious/nits: add template change and regen docs
* glorious/nits: update commentary on nolint directive
* glorious/nits: rm init func and log results in main.go
* Test to actually pull flag in
* linter: fix
* thrasher: nits
* gk: nits 4 goflags goooooooooo!
* gk: nits rn
* make sonic default json implementation
* screen 386
* linter: fix
* Add commentary
* glorious: nits Makefile not working
* gk: nits
* gk: nits whoops
* whoopsirino
* mention 32bit systems won't be sonic
* gk: super-duper nit of extremes
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* gateio: Add multi asset websocket support WIP.
* meow
* Add tests and shenanigans
* integrate flushing and for enabling/disabling pairs from rpc shenanigans
* some changes
* linter: fixes strikes again.
* Change name ConnectionAssociation -> ConnectionCandidate for better clarity on purpose. Change connections map to point to candidate to track subscriptions for future dynamic connections holder and drop struct ConnectionDetails.
* Add subscription tests (state functional)
* glorious:nits + proxy handling
* Spelling
* linter: fixerino
* instead of nil, dont do nil.
* clean up nils
* cya nils
* don't need to set URL or check if its running
* stream match update
* update tests
* linter: fix
* glorious: nits + handle context cancellations
* stop ping handler routine leak
* * Fix bug where reader routine on error that is not a disconnection error but websocket frame error or anything really makes the reader routine return and then connection never cycles and the buffer gets filled.
* Handle reconnection via an errors.Is check which is simpler and in that scope allow for quick disconnect reconnect without waiting for connection cycle.
* Dial now uses code from DialContext but just calls context.Background()
* Don't allow reader to return on parse binary response error. Just output error and return a non nil response
* Allow rollback on connect on any error across all connections
* fix shadow jutsu
* glorious/gk: nitters - adds in ws mock server
* linter: fix
* fix deadlock on connection as the previous channel had no reader and would hang connection reader for eternity.
* glorious: whooops
* gk: nits
* Leak issue and edge case
* Websocket: Add SendMessageReturnResponses
* whooooooopsie
* gk: nitssssss
* Update exchanges/stream/stream_match.go
Co-authored-by: Gareth Kirwan <gbjkirwan@gmail.com>
* Update exchanges/stream/stream_match_test.go
Co-authored-by: Gareth Kirwan <gbjkirwan@gmail.com>
* linter: appease the linter gods
* gk: nits
* gk: drain brain
* started
* more changes before merge match pr
* gateio: still building out
* gateio: finish spot
* fix up tests in gateio
* Add tests for stream package
* rm unused field
* glorious: nits
* rn files, specifically set function names to asset and offload routing to websocket type.
* linter: fix
* glorious: nits
* add counter and update gateio
* fix collision issue
* Update exchanges/stream/websocket.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* add tests
* linter: fix
* After merge
* Add error connection info
* upgrade to upstream merge
* Fix edge case where it does not reconnect made by an already closed connection
* stream coverage
* glorious: nits
* glorious: nits removed asset error handling in stream package
* linter: fix
* rm block
* Add basic readme
* fix asset enabled flush cycle for multi connection
* spella: fix
* linter: fix
* Add glorious suggestions, fix some race thing
* reinstate name before any routine gets spawned
* stop on error in mock tests
* glorious: nits
* glorious: nits found in CI build
* Add test for drain, bumped wait times as there seems to be something happening on macos CI builds, used context.WithTimeout because its instant.
* mutex across shutdown and connect for protection
* lint: fix
* test time withoffset, reinstate stop
* fix whoops
* const trafficCheckInterval; rm testmain
* y
* fix lint
* bump time check window
* stream: fix intermittant test failures while testing routines and remove code that is not needed.
* spells
* cant do what I did
* protect race due to routine.
* update testURL
* use mock websocket connection instead of test URL's
* linter: fix
* remove url because its throwing errors on CI builds
* connections drop all the time, don't need to worry about not being able to echo back ws data as it can be easily reviewed _test file side.
* remove another superfluous url thats not really set up for this
* spawn overwatch routine when there is no errors, inline checker instead of waiting for a time period, add sleep inline with echo handler as this is really quick and wanted to ensure that latency is handing correctly
* linter: fixerino uperino
* glorious: panix
* linter: things
* whoops
* dont need to make consecutive Unix() calls
* websocket: fix potential panic on error and no responses and adding waitForResponses
* rm json parser and handle in json package instead
* linter: fix
* linter: fix again
* * change field name OutboundRequestSignature to WrapperDefinedConnectionSignature for agnostic inbound and outbound connections.
* change method name GetOutboundConnection to GetConnection for agnostic inbound and outbound connections.
* drop outbound field map for improved performance just using a range and field check (less complex as well)
* change field name connections to connectionToWrapper for better clarity
* spells and magic and wands
* glorious: nits
* comparable check for signature
* mv err var
* glorious: nits and stuff
* attempt to fix race
* glorious: nits
* gk: nits; engine log cleanup
* gk: nits; OCD
* gk: nits; move function change file names
* gk: nits; 🚀
* gk: nits; convert variadic function and message inspection to interface and include a specific function for that handling so as to not need nil on every call
* gk: nits; continued
* gk: engine nits; rm loaded exchange
* gk: nits; drop WebsocketLoginResponse
* stream: Add match method EnsureMatchWithData
* gk: nits; rn Inspect to IsFinal
* gk: nits; rn to MessageFilter
* linter: fix
* gateio: update rate limit definitions (cherry-pick)
* Add test and missing
* Shared REST rate limit definitions with Websocket service, set lookup item to nil for systems that do not require rate limiting; add glorious nit
* integrate rate limits for websocket trading spot
* bitstamp: fix issue
* glorious: nits
* ch name and commentary
* fix bug add test
* rm a thing
* fix test
* Update engine/engine.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* thrasher: nits
* Update exchanges/stream/stream_match_test.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update exchanges/stream/stream_match_test.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* GK: nits rn websocket functions
* explicit function names for single to multi outbound orders
* linter: fix
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
Co-authored-by: Gareth Kirwan <gbjkirwan@gmail.com>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* gateio: Add multi asset websocket support WIP.
* meow
* Add tests and shenanigans
* integrate flushing and for enabling/disabling pairs from rpc shenanigans
* some changes
* linter: fixes strikes again.
* Change name ConnectionAssociation -> ConnectionCandidate for better clarity on purpose. Change connections map to point to candidate to track subscriptions for future dynamic connections holder and drop struct ConnectionDetails.
* Add subscription tests (state functional)
* glorious:nits + proxy handling
* Spelling
* linter: fixerino
* instead of nil, dont do nil.
* clean up nils
* cya nils
* don't need to set URL or check if its running
* stop ping handler routine leak
* * Fix bug where reader routine on error that is not a disconnection error but websocket frame error or anything really makes the reader routine return and then connection never cycles and the buffer gets filled.
* Handle reconnection via an errors.Is check which is simpler and in that scope allow for quick disconnect reconnect without waiting for connection cycle.
* Dial now uses code from DialContext but just calls context.Background()
* Don't allow reader to return on parse binary response error. Just output error and return a non nil response
* Allow rollback on connect on any error across all connections
* fix shadow jutsu
* glorious/gk: nitters - adds in ws mock server
* linter: fix
* fix deadlock on connection as the previous channel had no reader and would hang connection reader for eternity.
* gk: nits
* Leak issue and edge case
* gk: nits
* gk: drain brain
* glorious: nits
* Update exchanges/stream/websocket.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* add tests
* linter: fix
* After merge
* Add error connection info
* Fix edge case where it does not reconnect made by an already closed connection
* stream coverage
* glorious: nits
* glorious: nits removed asset error handling in stream package
* linter: fix
* rm block
* Add basic readme
* fix asset enabled flush cycle for multi connection
* spella: fix
* linter: fix
* Add glorious suggestions, fix some race thing
* reinstate name before any routine gets spawned
* stop on error in mock tests
* glorious: nits
* glorious: nits found in CI build
* Add test for drain, bumped wait times as there seems to be something happening on macos CI builds, used context.WithTimeout because its instant.
* mutex across shutdown and connect for protection
* lint: fix
* test time withoffset, reinstate stop
* fix whoops
* const trafficCheckInterval; rm testmain
* y
* fix lint
* bump time check window
* stream: fix intermittant test failures while testing routines and remove code that is not needed.
* spells
* cant do what I did
* protect race due to routine.
* update testURL
* use mock websocket connection instead of test URL's
* linter: fix
* remove url because its throwing errors on CI builds
* connections drop all the time, don't need to worry about not being able to echo back ws data as it can be easily reviewed _test file side.
* remove another superfluous url thats not really set up for this
* spawn overwatch routine when there is no errors, inline checker instead of waiting for a time period, add sleep inline with echo handler as this is really quick and wanted to ensure that latency is handing correctly
* linter: fixerino uperino
* glorious: panix
* linter: things
* whoops
* defer lock and use functions that don't require locking in SetProxyAddress
* lint: fix
* thrasher: nits
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* consolidate type to types package and share across code base
* rm convert type and convert codebase
* rm irrelavant test cases
* Fix tests
* glorious nits
* Update exchanges/gateio/gateio_types.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* thrasher: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* CI/build: Update Go version, linters and fix minor issues
* linters: Add intrange, copyloopvar, additional go vet linters to match gopls and fix issues
* Add in initial handling for quote/base currency deployment requirements
* include client order ID checking
* glorious: suggestions
* spell and fix
* linter/context/test
* rework tests and order side specific requirements
* linter
* mend panic at the disco
* mending more panics at the disco
* anudda fix brudda
* glorious: NITTTTTT BOOOOOMB
* leftover things and stuff
* whoops
* tie in gateio
* glorious: nit fixes life and everything.
* thrasher: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Websocket: Use ErrSubscribedAlready
instead of errChannelAlreadySubscribed
* Subscriptions: Replace Pair with Pairs
Given that some subscriptions have multiple pairs, support that as the
standard.
* Docs: Update subscriptions in add new exch
* RPC: Update Subscription Pairs
* Linter: Disable testifylint.Len
We deliberately use Equal over Len to avoid spamming the contents of large Slices
* Websocket: Add suffix to state consts
* Binance: Subscription Pairs support
* Bitfinex: Subscription Pairs support
* Bithumb: Subscription Pairs support
* Bitmex: Subscription Pairs support
* Bitstamp: Subscription Pairs support
* BTCMarkets: Subscription Pairs support
* BTSE: Subscription Pairs support
* Coinbase: Subscription Pairs support
* Coinut: Subscription Pairs support
* GateIO: Subscription Pairs support
* Gemini: Subscription Pairs support and improvement
* Hitbtc: Subscription Pairs support
* Huboi: Subscription Pairs support
* Kucoin: Subscription Pairs support
* Okcoin: Subscription Pairs support
* Poloniex: Subscription Pairs support
* Kraken: Add subscription Pairs support
Note: This is a naieve implementation because we want to rebase the
kraken websocket rewrite on top of this
* Bybit: Subscription Pairs support
* Okx: Subscription Pairs support
* Bitmex: Subsription configuration
* Fixes unauthenticated websocket left as CanUseAuth
* Fixes auth subs happening privately
* CoinbasePro: Subscription Configuration
* Consolidate ProductIDs when all subscriptions are for the same list
* Websocket: Log actual sent message when Verbose
* Subscriptions: Improve clarity of which key is which in Match
* Subscriptions: Lint fix for HugeParam
* Subscriptions: Add AddPairs and move keys from test
* Subscriptions: Simplify subscription keys and add key types
* Subscriptions: Add List.GroupPairs Rename sub.AddPairs
* Subscription: Fix ExactKey not matching 0 pairs
* Subscriptions: Remove unused IdentityKey and HasPairKey
* Subscriptions: Fix GetKey test
* Subscriptions: Test coverage improvements
* Websocket: Change State on Add/Remove
* Subscriptions: Improve error context
* Subscriptions: Fix Enable: false subs not ignored
* Bitfinex: Fix WsAuth test failing on DataHandler
DataHandler is eaten by dataMonitor now, so we need to use ToRoutine
* Deribit: Subscription Pairs support
* Websocket: Accept nil lists for checkSubscriptions
If the user passes in a nil (implicitly empty) list, we would not panic.
Therefore the burden of correctness about that data lies with them.
The list of subscriptions is empty, and that's okay, and possibly
convenient
* Websocket: Add context to NilPointer errors
* Subscriptions: Add context to nil errors
* Exchange: Fix error expectations in UnsubToWSChans
* initial consolidation of rate limiting code to request package to reduce bespoke code implementation
* continued
* finish abstraction
* lint
* exchanges: fix tests
* linter: fix
* poloniex: fix auth rate limit not being set
* ratelimiter: convert from token to weight
* glorious: nits addressed with fire
* linter: rip
* change func name set -> get
* fix test
* derbit: impl
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Tests: Move and simplify TestFixtureToDataHandler
* Currency: Fix PairsManager.Load breaking matcher
* Tests: Add multi-instance cache to UpdatePairsOnce
* Kraken: Fix TestUpdateTickers race error
Calling StorePairs on global instance can lead to race
* Bitfinex: Fix TestUpdateTickers racing intermittently
* Currency: Fix concurrent access to PM formats
* Currency: Fix SupportsAsset implementation
This should delegate entirely to PairManager's IsAssetSupported
* Okx: Fix PM intrusion, rm GetPairFromInstrumentID
* Exchange: Fix SetGlobalPairsManager to set asset enabled
* Bitflyer: Fix race on set TestGetCurrURL
TestGetCurrencyTradeURL would fail sometimes due to sequencing of
enabling futures but not having pairs for it.
* Tests: Simplify usage pattern for FixtureToDH
* initial purge and benchmarks proof before rn overhaul
* rn LinkedList -> Tranche(s) and purge references
* roll out acrost exchanges
* linterino
* rn silly billy label
* linter strikes AAAAAGAIN!
* fix some things
* rm comment
* Add actual comparison from master to branch benchmark for sorting algorithms
* lower case via git mv YAAY!
* drop code
* convert type name
* glorious: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* improv. timed mutex
* Add all protection back in and jankyness because races. :'(
* Add intial benchmarkeroos
* Add master benchmarks
* goodness me
* what?
* what again?
* glorious: nits
* just a swaperino instead
* clean up package nonce so that we only need to aquire mutex once
* unlock before checking master
* commentary
* wha
* more comment
* ch comment
* nonce: Allow for broad customisation externally with a ~2ns overhead
* glorious: nits maybe works?
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Shift wrapper function GetDefaultConfig to exchange.Base method definition, to ensure set defaults doesn't get called twice and to reduce code
* rm alphapoint bootstrap method as is defined as exchange.Base method
* add tests
* glorious: make it a function and make it IBOTEXCHANGE
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
* Websocket: Remove IsInit and simplify SetProxyAddress
IsInit was basically the same as IsConnected.
Any time Connect was called both would be set to true.
Any time we had a disconnect they'd both be set to false
Shutdown() incorrectly didn't setInit(false)
SetProxyAddress simplified to only reconnect a connected Websocket.
Any other state means it hasn't been Connected, or it's about to
reconnect anyway.
There's no handling for IsConnecting previously, either, so I've wrapped
that behind the main mutex.
* Websocket: Expand and Assertify tests
* Websocket: Simplify state transistions
* Websocket: Simplify Connecting/Connected state
* Websocket: Tests and errors for websocket
* Websocket: Make WebsocketNotEnabled a real error
This allows for testing and avoids the repetition.
If each returned error is a error.New() you can never use errors.Is()
* Websocket: Add more testable errors
* Websocket: Improve GenerateMessageID test
Testing just the last id doesn't feel very robust
* Websocket: Protect Setup() from races
* Websocket: Use atomics instead of mutex
This was spurred by looking at the setState call in trafficMonitor and
the effect on blocking and efficiency.
With the new atomic types in Go 1.19, and the small types in use here,
atomics should be safe for our usage. bools should be truly atomic,
and uint32 is atomic when the accepted value range is less than one byte/uint8 since
that can be written atomicly by concurrent processors.
Maybe that's not even a factor any more, however we don't even have to worry enough to check.
* Websocket: Fix and simplify traffic monitor
trafficMonitor had a check throttle at the end of the for loop to stop it just gobbling the (blocking) trafficAlert channel non-stop.
That makes sense, except that nothing is sent to the trafficAlert channel if there's no listener.
So that means that it's out by one second on the trafficAlert, because any traffic received during the pause is doesn't try to send a traffic alert.
The unstopped timer is deliberately leaked for later GC when shutdown.
It won't delay/block anything, and it's a trivial memory leak during an infrequent event.
Deliberately Choosing to recreate the timer each time instead of using Stop, drain and reset
* Websocket: Split traficMonitor test on behaviours
* Websocket: Remove trafficMonitor connected status
trafficMonitor does not need to set the connection to be connected.
Connect() does that. Anything after that should result in a full
shutdown and restart. It can't and shouldn't become connected
unexpectedly, and this is most likely a race anyway.
Also dropped trafficCheckInterval to 100ms to mitigate races of traffic
alerts being buffered for too long.
* Websocket: Set disconnected earlier in Shutdown
This caused a possible race where state is still connected, but we start
to trigger interested actors via ShutdownC and Wait.
They may check state and then call Shutdown again, such as
trafficMonitor
* Websocket: Wait 5s for slow tests to pass traffic draining
Keep getting failures upstream on test rigs.
Think they can be very contended, so this pushes the boundary right out
to 5s
* CI/build: Update Go version, linters and fix minor issues
* Bump golangci-lint to v1.56.1
* BinanceUS: Make uint usage consistent
* Throw blank identifiers into the trash
* Exchanges: Remove Pair upgrade handling
Now redundant behind #1401. These paths should never be met.
Several legacy coin upgrade paths being deprecated as well: ZUSD and CNY
Expecting any users with bad config from 3+ years ago would have to
reset anyway.
Also: At the time the intention of this was to upgrade the config
format.
However now, instead, it'd mostly serve to reset enabled pairs if
there's a config mistake, which doesn't feel right.
* Kraken: Fix typo in Kraken type struct
* Exchanges: Abstract exchange Start() and Run()
* Exchanges: Add test for abstracted Start
* Exchanges: Move Start to Bootstrap
* Simplify waitgroup usage
* Add call to exchange.Bootstrap to allow overide or supplementation
* Exchanges: Concurrent common bootstap actions
* Gateio: Remove incorrect Run in test
* GateIO: Fix pair dependencies in tests
This ensures that the pairs are initialised no more than needed and
kind-of just-in-time.
Better pattern might be to use a function to get these pairs when we
need them.
* Exchanges: Complete UpdatePairs before ExecLims
If we're going to update pairs, it needs to complete before we check for
limits to avoid errors on old pairs
* Exchanges: Remove Start and Run from tmpl
Since they're replaced by bootstrap now and shouldn't need customisation
normally
* Alphapoint: Move Start to Bootstrap
* GateIO: Fix linter shadow var
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* adds funding rate implementations and improvements
* merge fixes x1
* lint
* kucoin funding rates func make
* migrate sync-manager to keys
* some kucoin work
* adds some kucoin wrapper funcs
* ehhh, todo
* kucoin position
* start of orders
* adds the kucoin tests yay
* multiplier
* nits, EWS includes order limits
* NotYetImplemented, IsPerp improvements, cleaning
* lint, test fix, huobi time
* fixes issues, improves testing
* fixes linters I WRECKED
* local lint but remote lint, lint, lint, lint
* fixes err
* skip CI
* lint
* Supported rates, binance endpoints
* fixes weird mocktest problems
* no, CZ is invalid
* fixes some new EWS test errors
* Websockets: Add keys to websocket subscriptions
* This switches all RO uses of the mutex to use a RLock method.
* The mutex used for discrete field access has had scope drift from
name 'connectionMutex' so rename to more appropriate fieldsMutex
* The mutex used for Set/CanUseAuthEndpoints moves from the
subscriptions endpoint to the fieldsMutex
* Add GetSubscription by key
* Expose stream.Matcher type
* Bitfinex: Subscribe and Unsubscribe atomicly
* Fix Auth failures ignored
* This change makes it so that Subscribe and Unsubscribe wait for success
** Tells the DataHandler about errors
** Errors are returned to consumers
* Subscribes concurrently to the channels
* It also simplifies the chanId to stream mapping
* Removes unable to locate chanID: %d errors which are just noise
* Paves the way for unified channelSubscription id handling
* Adds support for subId for Book subscriptions, which is more robust
* Vastly simplifies what we need to test TestWsSubscribedResponse
This test was working to ensure that the various fancy key parsing
mechanisms all worked. Now that we use subId, we just need a thorough
test of that
* Expose Match.Set in order to capture websocket incoming data
Can't see another way of doing this. Doesn't seem too bad
* Allow tests to run with auth or WS
These flags made it difficult to run the tests whilst working on
websockets
* Enable API auth and WS in testconfig
This change minimises the changes requires for a full test run against
live endpoints, so that new contributors have a clearer testing path.
I cannot see any reason to turn WS off and Auth endpoints off when we're
not going to run API tests without Creds being set, and we're not going
to do live fire tests without canManipulateRealOrders
* TestWsSubscribe and various fixes
** Enables the websocket for live non-authed integration tests by default
** Adds an integration test for subscriptions
** Changes the Ws tests to respect canManipulateRealOrders
** Uses WsConnect instead of setupWs; fixes seqNo config not sent for WS tests
** Allows api creds to live in config/testdata.json which might be
less likely to accidentally commit, and less obtrusive
* Bitfinex: Support period and timeframe for Candles
* Fixes manual Subscribe() symbol or key formatting
* Unifies handling of params for DefaultSubscriptions and manual
subsrciptions
* Bitfinex: Handle conf and info WS channel events
* Bitfinex: Better tests for subscriptions
* fixup! Websockets: Add keys to websocket subscriptions
* fixup! Bitfinex: Subscribe and Unsubscribe atomicly
* fixup! Websockets: Add keys to websocket subscriptions
* Websockets: Add Pending subscription status
Add a status tracker so that Sub/Unsub can prevent duplicates,
and also fixes when first message comes before we have added the sub
to the tracker
* Websockets: Add State instead of pending
This change allows more clarity about the current state and
checks for specifically already Unsubing
* Bitfinex: Fix first sub message maybe lost
The only link we have between a sub req and the sub resp is the subID.
And the only link we have between a sub message and the sub is the chanID.
We can't derive a link using Pair or anything else.
This meant that by sending the resp and its chanID down the IncomingData
channel, we allowed the channel reader to maybe process the next
message, the first message on the channel, before the runtime executed
the switch back to subscribeToChan waiting on the chan.
To fix this, we key initially on subId.(string), and then replace it
with chanId.(int64) when we have it *inside* the wsHandleData so we
know we've procedurally handled it before the next message.
subscribeToChan is then free to remove the subId keyed Sub regardless of
error or not
If there's an error, we don't need to inline handling because there
won't be any second update.
Expands test coverage to make sure those subId keyed subscriptions are
removed.
* Websocket: Validate state in SetChanState
* fixup! Bitfinex: Fix first sub message maybe lost
* Websockets: Rename RemoveUnsuccessfulSubs
Implementation doesn't imply Unsuccessful or need to.
This change supports the registering of Pending subs
* Bitfinex: Fix race in Tests
* Bitstamp: WIP fixing trading fees
* Bitstamp/amended the TestGetFee test and currected the getTradingFee function
* Bitstamp: TestGetFee implemented for maker and taker
* Bitfinex: added a wrapped error
* Bitstamp: GetTradingFee and test updated, fetched from the API
Progresses #1271
* Bitstamp: minor changes- whitespace removal and comment added
* Bitstamp: fixed lint issues in TestGetBalance and TestGetTransactions
* Bitstamp:Typo in types TradingFee comment
* Bitstamp: GetAccountTradingFees at view the fees on all pairs
modified: exchanges/bitstamp/bitstamp.go
* Bitstamp: returning the TradingFee info instead of just MakerTakerFees
* Bitstamp:TestGetAccountTradingFees + TestGetAccountTradingFees added,data structure amended to match the outcome
* Bitstamp:error and a test for empty pair added in GetAccountTradingFee
* Bitstamp: RM the whitespace linter error
* Bitstamp: Add auth channel subscription handling
* Bitstamp: Avoid searching for asset type
We've hardcoded asset.Spot in order to find the pair.
Looking the asset up from the pair makes no sense.
* Bitstamp: Add type for wsOrders
* Bitstamp: Working test of Generic DataHandler
* Bitstamp: WS Order chan tests and remove type
orderType could be derived from status == New and Buy & price == 9+e9 or Sell & price == 0
But it would only be true for the first update and it really doesn't feel worth the risk
Consumers are going to have to merge to original request anyway
* Bitstamp: Linter fixes
* Kraken: Switch to shared fixture test
* Bitstamp: Fix lint on TestFixtureToDataHandler
* Engine: Add Clone for PairsManager
go-vet highlighted that the mutex here is a value when we copied the
PairsManager in a test.
Options to fix:
* Add a deep clone method to PairsManager
* Add a shallow clone method with a disclaimer
* Make the mutex a pointer
* Make the PairsManager itself a pointer
Options 3 and 4 are too invasive to justify changing at this point.
There's an inherent risk of PM being passed by value, but govet should
catch the copylock.
There's more risk in changing everything to use a pointer at this stage.
* Engine: Fix linter again, ironically
* Bitstamp: Rename OHLC const
* Bitstamp: Minor fixes to syntax
* Bitstamp: Simplify chanSymb=>pair
* Bitstamp: Still process order updates without ID
If there's a ClientOrderID we'll still process the order.
It doesn't seem likely we'd have this happen, but if it does we still
want consumers to get something.
* Bitstamp: Replace Clone with Lock methods
* Engine: Expose PairsManager's Mutex
Makes more sense than wrapping functions
* Bitstamp: Fix linter copylock (again)
* fixup! Engine: Expose PairsManager's Mutex
Omit Mutex from Json
* fixup! Bitstamp: Add auth channel subscription handling
Remove unused wsAuthToken
* Bitstamp: Simplify OrderData Unmarshal
* Bitstamp: Remove unused contexts
I added these following best practices, but the reality is that when/if
we get context awareness in GCT, there will be a lot more to fix and
this will be a drop in the ocean anyway.
* Bitstamp: Only call handleWSOrder for MyOrders
* Bitstamp: Avoid allocating again in handleWSOrder
* CurrencyPairs: Remove public mutex
Simplified to a Load method to avoid making mutex public
* Tests: Improve test readability and clarity
* Bitstamp: Wrap errWSPairParsingError
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Bitstamp: FetchWSAuth mock and live test
---------
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* all in a days work
* cleanup
* cleanup for real, also stop it binance.json
* minor coverage
* adds gateio to the slurry
* cleanup of types
* verbose verbose verbose verbose verbose verbose
* fixes huobi parsing issue
* fix bybit contract identification
* cleanup
* merge fixes
* addresses many big problems raised by SHAZ
* tracking errors and fixes
* funding rate if avail, fixes currency formatting
* Addresses nits and sneaks in extra fixes
* lint
* minor fixes after rebase
* better contract splitter for currencies like T-USDT
* forgot to add the exchange name like a fool
* merge fixes x1
* kucoin, direction, contract size
* rn direction, fix kucoin time
* WHOOPS
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* misdirection
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* exchanges: Add function to get standard config
* exchanges: add tests (cherry-pick here and above)
* after pick stuff
* cleanup
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
This prevents the frequent (5x / hour) disconn/reconns we're seeing with a
10s or even 20s traffic timeout.
I'd like to base the interval on the traffic timeout / 2, but that's
non-trivial right now, and 8s isn't an excessive default
* Bitstamp: Fix orderbook snapshot blanking LastUpdate
Drive-By: Remove:
`Bitstamp BTC/USDT spot orderbook has zero bid price, filtering.`
It's unactionable and happens every snapshot right now
* Bitstamp: Use ob timestamps for LastUpdate
Obviously.
* SubmitOrder- order.Buy replaced with IsLong
Progresses #1270
* Btcmarkets: order.Buy and order.Sell changed to order.Bid and order.Ask
* Bithumb: SubmitOrder- order.Buy replaced with IsLong
Progresses #1270
* Binanceus: SubmitOrder- order.Buy replaced with IsLong
Progresses #1720
* Bistamp: SubmitOrder- order.Buy replaced with IsLong
Progresses #1270
* Bitfinex: Changed order Side to IsLong
* Binance:switch added to SubmitOrder
* Binance: Replaced Buy and Sell in SubmitOrder with IsLong and IsShort
* Binance:SubmitOrder if statement for order side simplified
* switch over to package defined const for time layout
* bump appveyor playa
* bumperino to latest while setting patherino
* whoooops
* bump VS version set GOROOT
* puge build cache
* Revert "puge build cache"
This reverts commit 315bb578afc19529457f435e52af2172f5143bc5.
* bumperino to test
* purge setting of golang directory for version and allow default
* purge cache state when file change
* whoops
* thrasher: nits
* don't need to flusherino the cacherino
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* initial concept of a nice validation tester for exchanges
* adds some datahandler design
* expand testing
* more tests and fixes
* minor end of day fix for bithumb
* fixes implementation issues
* more test coverage and improvements, but not sure if i should continue
* fix more wrapper implementations
* adds error type, more fixes
* changes signature, fixes implementations
* fixes more wrapper implementations
* one more bit
* more cleanup
* WOW things work?
* lintle 1/1337
* mini bump
* fixes all linting
* neaten
* GetOrderInfo+ asset pair fixes+improvements
* adds new websocket test
* expand ws testing
* fix bug, expand tests, improve implementation
* code coverage of a lot of new codes
* fixes everything
* reverts accidental changes
* minor fixes from reviewing code
* removes Bitfinex cancelBatchOrder implementation
* fixes dumb baby typo for babies
* mini nit fixes
* so many nits to address
* addresses all the nits
* Titlecase
* switcheroo
* removes websocket testing for now
* fix appveyor, minor test fix
* fixes typo, re-kindles killed kode
* skip binance wrapper tests when running CI
* expired context, huobi okx fixes
* kodespull
* fix ordering
* time fix because why not
* fix exmo, others
* hopefully this fixes all of my life's problems
* last thing today
* huobi, more like hypotrophy
* golangci-lint, more like mypooroldknee-splint
* fix huobi times by removing them
* should fix okx currency issues
* blocks the application
* adds last little contingency for pairs
* addresses most nits and new problems
* lovely fixed before seeing why okx sucks
* fixes issues with okx websocket
* the classic receieieivaier
* lintle
* adds test and fixes existing tests
* expands error handling messages during setup
* fixes dumb okx bugs introduced
* quick fix for lint and exmo
* fixes nixes
* fix exmo deposit issue
* lint
* fixes issue with extra asset runs missing
* fix surprise race
* all the lint and merge fixes
* fixes surprise bugs in OKx
* fixes issues with times and chains
* fixing all the merge stuff
* merge fix
* rm logs and a panic potential
* lovely lint lament
* an easy demonstration of scenario, but not of initial purpose
* put it in the bin
* Revert "put it in the bin"
This reverts commit 15c6490f713233d43f10957367fcbf18e3818bdd.
* re-add after immediate error popup
* fix mini poor test design
* okx okay
* merge fixes
* fixes issues discovered in lovely test
* I FORGOT TO COMMIT THIS
* nit fixaroonaboo
* forgoetten test fix
* revert old okx asset intrument work
* fixes
* revert problems I didnt understand. update bybit
* fix merge bugs
* test cleanup
* further improvements
* reshuffle and lint
* rm redundant CI_TEST by rm the CI_TEST field that is redundant
* path fix
* move to its own section, dont run on 32 bit + appveyor
* lint
* fix lbank
* address nits
* let it rip
* fix failing test time range
* niteroo boogaloo
* mod tidy, use common.SimpleTimeFormat
* exchanges/sharedtestvalues: implement new functions to handle test skipping and announcements for standardising.
* exchanges: fin test impl.
* linter: fixes
* exchange_template: fix test
* allocate so it doesn't make a panic at the disco
* glorious: nits
* glorious: nits
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* linter: fix
* linter: shhhh
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* exchanges: add setTimeWindow boolean to GetKlineRequest params to differentiate between a set time period return from endpoint.
* glorious: nits
* exchange: conjugation
* Update exchanges/exchange.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits and an assortment of differences
* exchanges: remove some comments
* glorious: nits
* cleanup
* tests: fix
* Update exchanges/hitbtc/hitbtc_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/kline/kline.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/kline/kline_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* kline: fix test
* rm unused variables
* almost: nits
* glorious: nits
* linter: fix
* rm unused variable
* Refactored comment in the okex tests to ensure that it accurately reflects the variable name and the issue related to the time window, as requested by GloriousCode. The previous comment did not align with the identifier assigned to the property, which could cause confusion and misunderstanding among other programmers or stakeholders. The updated comment will improve the clarity and readability of the codebase and make it easier to understand the intended purpose of the associated variables. The change was made with the aim of improving the overall quality and maintainability of the code.
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* wrapper_coverage/exchanges: cancel context to not send rest requests/ populate context through functions that do rest requests
* linter: fix
* exchange_template: fix test
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* common: adjust common error slice to allow multi errors.Is matching and conform to interface better
* zb: forgot to save?
* linties: fixies
* linties: word change as well.
* nitters: glorious
* buts
* nitters: fix glorious bug
* Update common/common.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* nitters: shifty
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
