* gateio: Add multi asset websocket support WIP.
* meow
* Add tests and shenanigans
* integrate flushing and for enabling/disabling pairs from rpc shenanigans
* some changes
* linter: fixes strikes again.
* Change name ConnectionAssociation -> ConnectionCandidate for better clarity on purpose. Change connections map to point to candidate to track subscriptions for future dynamic connections holder and drop struct ConnectionDetails.
* Add subscription tests (state functional)
* glorious:nits + proxy handling
* Spelling
* linter: fixerino
* instead of nil, dont do nil.
* clean up nils
* cya nils
* don't need to set URL or check if its running
* stop ping handler routine leak
* * Fix bug where reader routine on error that is not a disconnection error but websocket frame error or anything really makes the reader routine return and then connection never cycles and the buffer gets filled.
* Handle reconnection via an errors.Is check which is simpler and in that scope allow for quick disconnect reconnect without waiting for connection cycle.
* Dial now uses code from DialContext but just calls context.Background()
* Don't allow reader to return on parse binary response error. Just output error and return a non nil response
* Allow rollback on connect on any error across all connections
* fix shadow jutsu
* glorious/gk: nitters - adds in ws mock server
* linter: fix
* fix deadlock on connection as the previous channel had no reader and would hang connection reader for eternity.
* gk: nits
* Leak issue and edge case
* gk: nits
* gk: drain brain
* glorious: nits
* Update exchanges/stream/websocket.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* add tests
* linter: fix
* After merge
* Add error connection info
* Fix edge case where it does not reconnect made by an already closed connection
* stream coverage
* glorious: nits
* glorious: nits removed asset error handling in stream package
* linter: fix
* rm block
* Add basic readme
* fix asset enabled flush cycle for multi connection
* spella: fix
* linter: fix
* Add glorious suggestions, fix some race thing
* reinstate name before any routine gets spawned
* stop on error in mock tests
* glorious: nits
* glorious: nits found in CI build
* Add test for drain, bumped wait times as there seems to be something happening on macos CI builds, used context.WithTimeout because its instant.
* mutex across shutdown and connect for protection
* lint: fix
* test time withoffset, reinstate stop
* fix whoops
* const trafficCheckInterval; rm testmain
* y
* fix lint
* bump time check window
* stream: fix intermittant test failures while testing routines and remove code that is not needed.
* spells
* cant do what I did
* protect race due to routine.
* update testURL
* use mock websocket connection instead of test URL's
* linter: fix
* remove url because its throwing errors on CI builds
* connections drop all the time, don't need to worry about not being able to echo back ws data as it can be easily reviewed _test file side.
* remove another superfluous url thats not really set up for this
* spawn overwatch routine when there is no errors, inline checker instead of waiting for a time period, add sleep inline with echo handler as this is really quick and wanted to ensure that latency is handing correctly
* linter: fixerino uperino
* glorious: panix
* linter: things
* whoops
* defer lock and use functions that don't require locking in SetProxyAddress
* lint: fix
* thrasher: nits
---------
Co-authored-by: shazbert <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Add in extra field for colocation monitoring
* rm tags
* populate through gateio orderbooks
* populate through incremental updates
* Add insert at field for orderbook depth
* I AM A BAD SPELLLLLLA
* add it in
* c change
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* gateio: update FuturesAccount struct
* gateio: update Position struct
* gateio: rm redundant checks and add in actual required checks
* export GateioTime
* linter: fix
* linter: again fix
* issue: fix
* gateio: update fee struct and such
* Update exchanges/gateio/gateio_types.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/gateio/gateio_convert.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* use Time type acrost file
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Websocket: Use ErrSubscribedAlready
instead of errChannelAlreadySubscribed
* Subscriptions: Replace Pair with Pairs
Given that some subscriptions have multiple pairs, support that as the
standard.
* Docs: Update subscriptions in add new exch
* RPC: Update Subscription Pairs
* Linter: Disable testifylint.Len
We deliberately use Equal over Len to avoid spamming the contents of large Slices
* Websocket: Add suffix to state consts
* Binance: Subscription Pairs support
* Bitfinex: Subscription Pairs support
* Bithumb: Subscription Pairs support
* Bitmex: Subscription Pairs support
* Bitstamp: Subscription Pairs support
* BTCMarkets: Subscription Pairs support
* BTSE: Subscription Pairs support
* Coinbase: Subscription Pairs support
* Coinut: Subscription Pairs support
* GateIO: Subscription Pairs support
* Gemini: Subscription Pairs support and improvement
* Hitbtc: Subscription Pairs support
* Huboi: Subscription Pairs support
* Kucoin: Subscription Pairs support
* Okcoin: Subscription Pairs support
* Poloniex: Subscription Pairs support
* Kraken: Add subscription Pairs support
Note: This is a naieve implementation because we want to rebase the
kraken websocket rewrite on top of this
* Bybit: Subscription Pairs support
* Okx: Subscription Pairs support
* Bitmex: Subsription configuration
* Fixes unauthenticated websocket left as CanUseAuth
* Fixes auth subs happening privately
* CoinbasePro: Subscription Configuration
* Consolidate ProductIDs when all subscriptions are for the same list
* Websocket: Log actual sent message when Verbose
* Subscriptions: Improve clarity of which key is which in Match
* Subscriptions: Lint fix for HugeParam
* Subscriptions: Add AddPairs and move keys from test
* Subscriptions: Simplify subscription keys and add key types
* Subscriptions: Add List.GroupPairs Rename sub.AddPairs
* Subscription: Fix ExactKey not matching 0 pairs
* Subscriptions: Remove unused IdentityKey and HasPairKey
* Subscriptions: Fix GetKey test
* Subscriptions: Test coverage improvements
* Websocket: Change State on Add/Remove
* Subscriptions: Improve error context
* Subscriptions: Fix Enable: false subs not ignored
* Bitfinex: Fix WsAuth test failing on DataHandler
DataHandler is eaten by dataMonitor now, so we need to use ToRoutine
* Deribit: Subscription Pairs support
* Websocket: Accept nil lists for checkSubscriptions
If the user passes in a nil (implicitly empty) list, we would not panic.
Therefore the burden of correctness about that data lies with them.
The list of subscriptions is empty, and that's okay, and possibly
convenient
* Websocket: Add context to NilPointer errors
* Subscriptions: Add context to nil errors
* Exchange: Fix error expectations in UnsubToWSChans
* initial purge and benchmarks proof before rn overhaul
* rn LinkedList -> Tranche(s) and purge references
* roll out acrost exchanges
* linterino
* rn silly billy label
* linter strikes AAAAAGAIN!
* fix some things
* rm comment
* Add actual comparison from master to branch benchmark for sorting algorithms
* lower case via git mv YAAY!
* drop code
* convert type name
* glorious: nits
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Websocket: Remove IsInit and simplify SetProxyAddress
IsInit was basically the same as IsConnected.
Any time Connect was called both would be set to true.
Any time we had a disconnect they'd both be set to false
Shutdown() incorrectly didn't setInit(false)
SetProxyAddress simplified to only reconnect a connected Websocket.
Any other state means it hasn't been Connected, or it's about to
reconnect anyway.
There's no handling for IsConnecting previously, either, so I've wrapped
that behind the main mutex.
* Websocket: Expand and Assertify tests
* Websocket: Simplify state transistions
* Websocket: Simplify Connecting/Connected state
* Websocket: Tests and errors for websocket
* Websocket: Make WebsocketNotEnabled a real error
This allows for testing and avoids the repetition.
If each returned error is a error.New() you can never use errors.Is()
* Websocket: Add more testable errors
* Websocket: Improve GenerateMessageID test
Testing just the last id doesn't feel very robust
* Websocket: Protect Setup() from races
* Websocket: Use atomics instead of mutex
This was spurred by looking at the setState call in trafficMonitor and
the effect on blocking and efficiency.
With the new atomic types in Go 1.19, and the small types in use here,
atomics should be safe for our usage. bools should be truly atomic,
and uint32 is atomic when the accepted value range is less than one byte/uint8 since
that can be written atomicly by concurrent processors.
Maybe that's not even a factor any more, however we don't even have to worry enough to check.
* Websocket: Fix and simplify traffic monitor
trafficMonitor had a check throttle at the end of the for loop to stop it just gobbling the (blocking) trafficAlert channel non-stop.
That makes sense, except that nothing is sent to the trafficAlert channel if there's no listener.
So that means that it's out by one second on the trafficAlert, because any traffic received during the pause is doesn't try to send a traffic alert.
The unstopped timer is deliberately leaked for later GC when shutdown.
It won't delay/block anything, and it's a trivial memory leak during an infrequent event.
Deliberately Choosing to recreate the timer each time instead of using Stop, drain and reset
* Websocket: Split traficMonitor test on behaviours
* Websocket: Remove trafficMonitor connected status
trafficMonitor does not need to set the connection to be connected.
Connect() does that. Anything after that should result in a full
shutdown and restart. It can't and shouldn't become connected
unexpectedly, and this is most likely a race anyway.
Also dropped trafficCheckInterval to 100ms to mitigate races of traffic
alerts being buffered for too long.
* Websocket: Set disconnected earlier in Shutdown
This caused a possible race where state is still connected, but we start
to trigger interested actors via ShutdownC and Wait.
They may check state and then call Shutdown again, such as
trafficMonitor
* Websocket: Wait 5s for slow tests to pass traffic draining
Keep getting failures upstream on test rigs.
Think they can be very contended, so this pushes the boundary right out
to 5s
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* Websockets: Add keys to websocket subscriptions
* This switches all RO uses of the mutex to use a RLock method.
* The mutex used for discrete field access has had scope drift from
name 'connectionMutex' so rename to more appropriate fieldsMutex
* The mutex used for Set/CanUseAuthEndpoints moves from the
subscriptions endpoint to the fieldsMutex
* Add GetSubscription by key
* Expose stream.Matcher type
* Bitfinex: Subscribe and Unsubscribe atomicly
* Fix Auth failures ignored
* This change makes it so that Subscribe and Unsubscribe wait for success
** Tells the DataHandler about errors
** Errors are returned to consumers
* Subscribes concurrently to the channels
* It also simplifies the chanId to stream mapping
* Removes unable to locate chanID: %d errors which are just noise
* Paves the way for unified channelSubscription id handling
* Adds support for subId for Book subscriptions, which is more robust
* Vastly simplifies what we need to test TestWsSubscribedResponse
This test was working to ensure that the various fancy key parsing
mechanisms all worked. Now that we use subId, we just need a thorough
test of that
* Expose Match.Set in order to capture websocket incoming data
Can't see another way of doing this. Doesn't seem too bad
* Allow tests to run with auth or WS
These flags made it difficult to run the tests whilst working on
websockets
* Enable API auth and WS in testconfig
This change minimises the changes requires for a full test run against
live endpoints, so that new contributors have a clearer testing path.
I cannot see any reason to turn WS off and Auth endpoints off when we're
not going to run API tests without Creds being set, and we're not going
to do live fire tests without canManipulateRealOrders
* TestWsSubscribe and various fixes
** Enables the websocket for live non-authed integration tests by default
** Adds an integration test for subscriptions
** Changes the Ws tests to respect canManipulateRealOrders
** Uses WsConnect instead of setupWs; fixes seqNo config not sent for WS tests
** Allows api creds to live in config/testdata.json which might be
less likely to accidentally commit, and less obtrusive
* Bitfinex: Support period and timeframe for Candles
* Fixes manual Subscribe() symbol or key formatting
* Unifies handling of params for DefaultSubscriptions and manual
subsrciptions
* Bitfinex: Handle conf and info WS channel events
* Bitfinex: Better tests for subscriptions
* fixup! Websockets: Add keys to websocket subscriptions
* fixup! Bitfinex: Subscribe and Unsubscribe atomicly
* fixup! Websockets: Add keys to websocket subscriptions
* Websockets: Add Pending subscription status
Add a status tracker so that Sub/Unsub can prevent duplicates,
and also fixes when first message comes before we have added the sub
to the tracker
* Websockets: Add State instead of pending
This change allows more clarity about the current state and
checks for specifically already Unsubing
* Bitfinex: Fix first sub message maybe lost
The only link we have between a sub req and the sub resp is the subID.
And the only link we have between a sub message and the sub is the chanID.
We can't derive a link using Pair or anything else.
This meant that by sending the resp and its chanID down the IncomingData
channel, we allowed the channel reader to maybe process the next
message, the first message on the channel, before the runtime executed
the switch back to subscribeToChan waiting on the chan.
To fix this, we key initially on subId.(string), and then replace it
with chanId.(int64) when we have it *inside* the wsHandleData so we
know we've procedurally handled it before the next message.
subscribeToChan is then free to remove the subId keyed Sub regardless of
error or not
If there's an error, we don't need to inline handling because there
won't be any second update.
Expands test coverage to make sure those subId keyed subscriptions are
removed.
* Websocket: Validate state in SetChanState
* fixup! Bitfinex: Fix first sub message maybe lost
* Websockets: Rename RemoveUnsuccessfulSubs
Implementation doesn't imply Unsuccessful or need to.
This change supports the registering of Pending subs
* Bitfinex: Fix race in Tests
* Adding Public Endpoints and test functions
* Adding public endpoints and test functions
* Adding private spot endpoints
* Adding private endpoints and corresponding tests for margin
* Adding Margin Private endpoints
* Adding cross margin and flash swap endpoints
* Adding futures private endpoints
* Adding futures private endpoints and corresponding tests
* Adding Options and SubAccount endpoints and their unit tests
* Adding Wrapper functions
* Complete wrapper functions and corresponding unit test functions
* Fixing wrapper issues and adding websocket functions
* Update of Spot websocket and adding futures websocket handlers
* completed futures WS push data endpoints
* Completed Options websocket endpoints
* Adding websocket support for delivery futures and slight update on endpoint funcs
* Added Delivery websocket support and fix linter issues
* Update on Unit tests
* fix slight currency format error
* Fix slight endpoint tempos
* Update on conditional statements and unit tests issues
* fixing slight tempos
* Slight model and websocket data push method change
* Fix unit test tempos and updating models
* Fix on code structures and update on unit tests
* Slight code fix
* Remove print statements
* Update on tradable pairs fetch eps
* Fix websocket tempos
* Adding types to websocket routine manager
* Fix slight issues
* Slight fixes
* Updating wrapper funcs and models
* Slight update
* Update on test
* Update on tradable pairs
* update conditional statements
* Fixing slight issues
* Updating unit tests
* Minor fixes depending review comments
* Remove redundant method declaration
* Adding missing intervals
* Updating fetch tradable pairs
* update tradable pairs issues
* Addressing small tempos
* Slight fix on ticker
* Minor Fixes
* Minor review comment fixes
* Unit test and minor code updates
* Slight code updates
* Minor updates depending review comments
* Fixes
* Updating incoming message matcher
* Fix missing merge issue
* Fix minor wrapper issues
* Updating ratelimit and other issues
* Updating endpoint models and adding missing eps
* Update on code structure and models
* Minor codespell fixes
* Minor update on models
* fix unit test panic
* Minor race fix
* Fix issues in generating signature and unit tests
* Minor update on wrapper and unit tests
* Minor fix on wrapper
* Mini linter issues fix
* Minor fix
* endpoint fixes and slight update
* Minor fixes
* Updating exchange functions and unit tests
* Unit test and wrapper updates
* Remove options candlestick support
* Minor unit test and wrapper fix
* Unit test update
* minor fix on unit test and wrapper
* endpoints constants name change
* Add minor wrapper issues
* endpoint constants update
* endpoint url updates
* Updating subscriptions
* fixing dual mode endpoint methods
* minor fix
* rm small tempo
* Update on websocket orderbook handling
* Orderbook and currency pair update
* fix linter and test issues
* minor helper function update
* Fix wrapper coverage and wrapper issues
* delete unused variables
* Minor fix on ReadData() call
* separating websocket handlers
* separating websocket handlers
* Minor fix on enabled pair
* minor fix
* check instrument availability in spot
* create a separate subscriber for sake of multiple websocket connection
* linter fix
* minor websocket and gateio endpoints fix
* fix nil pointer exception
* minor fixes
* spelling fix decerializes -> deserializes
* fix Bitfinex unit test issues
* minor unknown currency pair labling fix
* minor currency pair handling fix
* slight update on GetDepositAddress wrapper unit test
* setting max request job to 200
* fixing numerical and timestamp type convert
* fix value overflow error
* change method of parsing orderbook price
* unifying timestamp conversion types to gateioTime
---------
Co-authored-by: Samuael Adnew <samuaelad@Samuaels-MacBook-Air.local>
