* Websocket: Remove IsInit and simplify SetProxyAddress
IsInit was basically the same as IsConnected.
Any time Connect was called both would be set to true.
Any time we had a disconnect they'd both be set to false
Shutdown() incorrectly didn't setInit(false)
SetProxyAddress simplified to only reconnect a connected Websocket.
Any other state means it hasn't been Connected, or it's about to
reconnect anyway.
There's no handling for IsConnecting previously, either, so I've wrapped
that behind the main mutex.
* Websocket: Expand and Assertify tests
* Websocket: Simplify state transistions
* Websocket: Simplify Connecting/Connected state
* Websocket: Tests and errors for websocket
* Websocket: Make WebsocketNotEnabled a real error
This allows for testing and avoids the repetition.
If each returned error is a error.New() you can never use errors.Is()
* Websocket: Add more testable errors
* Websocket: Improve GenerateMessageID test
Testing just the last id doesn't feel very robust
* Websocket: Protect Setup() from races
* Websocket: Use atomics instead of mutex
This was spurred by looking at the setState call in trafficMonitor and
the effect on blocking and efficiency.
With the new atomic types in Go 1.19, and the small types in use here,
atomics should be safe for our usage. bools should be truly atomic,
and uint32 is atomic when the accepted value range is less than one byte/uint8 since
that can be written atomicly by concurrent processors.
Maybe that's not even a factor any more, however we don't even have to worry enough to check.
* Websocket: Fix and simplify traffic monitor
trafficMonitor had a check throttle at the end of the for loop to stop it just gobbling the (blocking) trafficAlert channel non-stop.
That makes sense, except that nothing is sent to the trafficAlert channel if there's no listener.
So that means that it's out by one second on the trafficAlert, because any traffic received during the pause is doesn't try to send a traffic alert.
The unstopped timer is deliberately leaked for later GC when shutdown.
It won't delay/block anything, and it's a trivial memory leak during an infrequent event.
Deliberately Choosing to recreate the timer each time instead of using Stop, drain and reset
* Websocket: Split traficMonitor test on behaviours
* Websocket: Remove trafficMonitor connected status
trafficMonitor does not need to set the connection to be connected.
Connect() does that. Anything after that should result in a full
shutdown and restart. It can't and shouldn't become connected
unexpectedly, and this is most likely a race anyway.
Also dropped trafficCheckInterval to 100ms to mitigate races of traffic
alerts being buffered for too long.
* Websocket: Set disconnected earlier in Shutdown
This caused a possible race where state is still connected, but we start
to trigger interested actors via ShutdownC and Wait.
They may check state and then call Shutdown again, such as
trafficMonitor
* Websocket: Wait 5s for slow tests to pass traffic draining
Keep getting failures upstream on test rigs.
Think they can be very contended, so this pushes the boundary right out
to 5s
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* Websockets: Add keys to websocket subscriptions
* This switches all RO uses of the mutex to use a RLock method.
* The mutex used for discrete field access has had scope drift from
name 'connectionMutex' so rename to more appropriate fieldsMutex
* The mutex used for Set/CanUseAuthEndpoints moves from the
subscriptions endpoint to the fieldsMutex
* Add GetSubscription by key
* Expose stream.Matcher type
* Bitfinex: Subscribe and Unsubscribe atomicly
* Fix Auth failures ignored
* This change makes it so that Subscribe and Unsubscribe wait for success
** Tells the DataHandler about errors
** Errors are returned to consumers
* Subscribes concurrently to the channels
* It also simplifies the chanId to stream mapping
* Removes unable to locate chanID: %d errors which are just noise
* Paves the way for unified channelSubscription id handling
* Adds support for subId for Book subscriptions, which is more robust
* Vastly simplifies what we need to test TestWsSubscribedResponse
This test was working to ensure that the various fancy key parsing
mechanisms all worked. Now that we use subId, we just need a thorough
test of that
* Expose Match.Set in order to capture websocket incoming data
Can't see another way of doing this. Doesn't seem too bad
* Allow tests to run with auth or WS
These flags made it difficult to run the tests whilst working on
websockets
* Enable API auth and WS in testconfig
This change minimises the changes requires for a full test run against
live endpoints, so that new contributors have a clearer testing path.
I cannot see any reason to turn WS off and Auth endpoints off when we're
not going to run API tests without Creds being set, and we're not going
to do live fire tests without canManipulateRealOrders
* TestWsSubscribe and various fixes
** Enables the websocket for live non-authed integration tests by default
** Adds an integration test for subscriptions
** Changes the Ws tests to respect canManipulateRealOrders
** Uses WsConnect instead of setupWs; fixes seqNo config not sent for WS tests
** Allows api creds to live in config/testdata.json which might be
less likely to accidentally commit, and less obtrusive
* Bitfinex: Support period and timeframe for Candles
* Fixes manual Subscribe() symbol or key formatting
* Unifies handling of params for DefaultSubscriptions and manual
subsrciptions
* Bitfinex: Handle conf and info WS channel events
* Bitfinex: Better tests for subscriptions
* fixup! Websockets: Add keys to websocket subscriptions
* fixup! Bitfinex: Subscribe and Unsubscribe atomicly
* fixup! Websockets: Add keys to websocket subscriptions
* Websockets: Add Pending subscription status
Add a status tracker so that Sub/Unsub can prevent duplicates,
and also fixes when first message comes before we have added the sub
to the tracker
* Websockets: Add State instead of pending
This change allows more clarity about the current state and
checks for specifically already Unsubing
* Bitfinex: Fix first sub message maybe lost
The only link we have between a sub req and the sub resp is the subID.
And the only link we have between a sub message and the sub is the chanID.
We can't derive a link using Pair or anything else.
This meant that by sending the resp and its chanID down the IncomingData
channel, we allowed the channel reader to maybe process the next
message, the first message on the channel, before the runtime executed
the switch back to subscribeToChan waiting on the chan.
To fix this, we key initially on subId.(string), and then replace it
with chanId.(int64) when we have it *inside* the wsHandleData so we
know we've procedurally handled it before the next message.
subscribeToChan is then free to remove the subId keyed Sub regardless of
error or not
If there's an error, we don't need to inline handling because there
won't be any second update.
Expands test coverage to make sure those subId keyed subscriptions are
removed.
* Websocket: Validate state in SetChanState
* fixup! Bitfinex: Fix first sub message maybe lost
* Websockets: Rename RemoveUnsuccessfulSubs
Implementation doesn't imply Unsuccessful or need to.
This change supports the registering of Pending subs
* Bitfinex: Fix race in Tests
* starting public endpoints
* Adding public endpoints
* added public spot market endpoints
* websocket subscriptions updates
* websocket push data handlers completing
* linter fix
* Added funding private endpoints
* Adding authenticated account endpoints
* Added fiat and OTC-RFQ authenticated endpoints
* trading authenticated endpoints
* completing trade endpoints and add public wrapper endpoints
* Authenticated wrapper functions and corresponding unit test
* Adding authenticated websocket endpoint and fixing wrapper functions
* Documentation and exchange websocket update
* update websocket orderbook checksum handling
* linter issues fix and unit test update
* remove invalid orderbook endpoint and unit test
* Documentation, handlers, and model types update
* minot fix
* Minor fixes
* Updating unit tests and added missing endpoints
* Add missing credential check
* Minor unit test fixes
* fix minor linter issue
* add snaphot test unit test
* Fix on update checksum and documentation update
* update exchange, add UpdateOrderExecutionLimits, and update documentation
* Minor fix on tickers fetching
* Minor websocket fix and smaill unit tests
* Minor websocket and naming fixes
* uncomment default channels
* Fix type and unit test issues
* websocket channels and data handling update
* Update Advanced-Algo websocket handling and minor fixes
* documentation and minor code fixes
* Fix name changes
* documentation contribution update
* intervalToString method update
* fix exchange_wrapper_standard tests
* Fix minor issues based on exchange_wrapper_standards_test
* Fix wrapper extended candlestick check
* websocket orders fetching error check method update
* Exchange name check and change
* docs: Add missing contributors
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* initial concept of a nice validation tester for exchanges
* adds some datahandler design
* expand testing
* more tests and fixes
* minor end of day fix for bithumb
* fixes implementation issues
* more test coverage and improvements, but not sure if i should continue
* fix more wrapper implementations
* adds error type, more fixes
* changes signature, fixes implementations
* fixes more wrapper implementations
* one more bit
* more cleanup
* WOW things work?
* lintle 1/1337
* mini bump
* fixes all linting
* neaten
* GetOrderInfo+ asset pair fixes+improvements
* adds new websocket test
* expand ws testing
* fix bug, expand tests, improve implementation
* code coverage of a lot of new codes
* fixes everything
* reverts accidental changes
* minor fixes from reviewing code
* removes Bitfinex cancelBatchOrder implementation
* fixes dumb baby typo for babies
* mini nit fixes
* so many nits to address
* addresses all the nits
* Titlecase
* switcheroo
* removes websocket testing for now
* fix appveyor, minor test fix
* fixes typo, re-kindles killed kode
* skip binance wrapper tests when running CI
* expired context, huobi okx fixes
* kodespull
* fix ordering
* time fix because why not
* fix exmo, others
* hopefully this fixes all of my life's problems
* last thing today
* huobi, more like hypotrophy
* golangci-lint, more like mypooroldknee-splint
* fix huobi times by removing them
* should fix okx currency issues
* blocks the application
* adds last little contingency for pairs
* addresses most nits and new problems
* lovely fixed before seeing why okx sucks
* fixes issues with okx websocket
* the classic receieieivaier
* lintle
* adds test and fixes existing tests
* expands error handling messages during setup
* fixes dumb okx bugs introduced
* quick fix for lint and exmo
* fixes nixes
* fix exmo deposit issue
* lint
* fixes issue with extra asset runs missing
* fix surprise race
* all the lint and merge fixes
* fixes surprise bugs in OKx
* fixes issues with times and chains
* fixing all the merge stuff
* merge fix
* rm logs and a panic potential
* lovely lint lament
* an easy demonstration of scenario, but not of initial purpose
* put it in the bin
* Revert "put it in the bin"
This reverts commit 15c6490f713233d43f10957367fcbf18e3818bdd.
* re-add after immediate error popup
* fix mini poor test design
* okx okay
* merge fixes
* fixes issues discovered in lovely test
* I FORGOT TO COMMIT THIS
* nit fixaroonaboo
* forgoetten test fix
* revert old okx asset intrument work
* fixes
* revert problems I didnt understand. update bybit
* fix merge bugs
* test cleanup
* further improvements
* reshuffle and lint
* rm redundant CI_TEST by rm the CI_TEST field that is redundant
* path fix
* move to its own section, dont run on 32 bit + appveyor
* lint
* fix lbank
* address nits
* let it rip
* fix failing test time range
* niteroo boogaloo
* mod tidy, use common.SimpleTimeFormat
* Initial commit
* Successful authenticated request implementation.
* Removes data from okcoin, okex. Implements some account okgroup endpoints. Adds tests
* Finishes account API endpoint implementations.
* Implements and adds tests for the following okgroup v3 API endpoints: GetSpotTradingAccounts, GetSpotTradingAccountForCurrency, GetSpotBillDetailsForCurrency, PlaceSpotOrder, PlaceMultipleSpotOrders, CancelSpotOrder, CancelMultipleSpotOrders, GetSpotOrders, GetSpotOpenOrders, GetSpotOrder, GetSpotTransactionDetails, GetSpotTokenPairDetails, GetSpotOrderBook, GetSpotAllTokenPairsInformation, GetSpotAllTokenPairsInformationForCurrency, GetSpotFilledOrdersInformation, GetSpotMarketData
* Implements and adds tests for all margin api endpoints: GetMarginTradingAccounts, GetMarginTradingAccountsForCurrency, GetMarginBillDetails, GetMarginAccountSettings, GetMarginLoanHistory, OpenMarginLoan, RepayMarginLoan, PlaceMarginOrder, PlaceMultipleMarginOrders, CancelMarginOrder, CancelMultipleMarginOrders, GetMarginOrders, GetMarginOpenOrders, GetMarginOrder, GetMarginTransactionDetails. Simplifies some Spot endpoints combining ForCurrency funcs where possible
* Adds all 29 Futures endpoints with tests. Updates comments and naming conventions. Adds standard realordertest func. Adds ability to make public API requests. Adds test purpose comments
* Adds 29 endpoints for SWAP API support. Adds tests for each endpoint. Declares response variables in function declaration. Simplifies URL parameter formatting
* Adds all ETT endpoints with tests
* Creates OKCoin and OKEX struct types. Moves okgroup tests to okcoin and okex exchanges. Updates withdraw fee calculation. Updates exchange.go exchange declaration to point to new types. Streamlines wrapper tests. Begins websocket integration
* Rebase fixes
* Deletes okcoin_types.go, okcoin_wrapper.go, okex_types.go, okex_wrapper.go. Combines okex,okcoin wrappers in okgroup_wrapper.go. Removes boilerplate url.values with new request struct type parsing. Adds github.com/google/go-querystring to go modules. Replaces USDT with USD for OKCoin tests. Moves OKEX specific endpoints (futures, swap & ett) to okex.go. Fixes recieving receiving again
* Maps the wrapper
* Parses json into time.Time instead of string + conversion
* Renames websocket.SetEnabled to websocket.SetWsStatusAndConnection. Maps main spot websocket functions for okgroup. Adds some basic ws tests
* Updates websocket default URLS, adds checksum tests, removes setdefaults from okgroup, adds WebsocketDataWrapper to wrap all okgroup websocket data responses, handles spot, swap, index and futures ticker, candle, trade, orderbook, funding fee websocket responses. Partially implements checksum validation on orderbook data. Fixes all linting issues
* Handles the calculation of okgroup websocket checksums. Adds tests
* Now all orderbook checksums are validated. Cleans up implementations and removes invalid checksum calculator functions. Adds function to parse ordertype. Puts verbose logs behind verbose check
* Removes parallel from okgroup tests. Removes unused code. Adds GetWsChannelWithoutOrderType. Improves handling of WS data types. Adds types for more ws channels. Simplifies update orderbook handling
* updates btse func name
* linting
* Fixes websocket connection issue with tests. Removes test verbosity
* Updates checksum calculation to handle more than 7 decimal places. Adds rate limiters. Uses != "" instead of len > 0. Adds new test to handle checksum calculation with 8 decimal places.
* Removes logging. Fixes orderbook wrapper references
* Adds slightly more robust resubscribe func. Adds websocket tests that can detect websocket errors
* Fixes linting issues
* Adds new WS func IsConnected() to expose ws status. Tests protect against channel timeout
* Adds test comments. Fixes parallel issues for futures tests
* Fixes error output for wrapper function
* Added new base logger
* updated example and test configs
* updated exchange helpers restful router & server
* logPath is now passed to the logger to remove dependency on common package
* updated everything besides exchanges to use new logger
* alphapoint to bitmex done
* updated bitmex bitstamp bittrex btcc and also performance changes to logger
* btcmarkets coinbase coinut exmo gateio wrappers updated
* gateio and gemini logger updated
* hitbtc huobi itbit & kraken updated
* All exchanges updatd
* return correct error for disabled websocket
* don't disconnect client on invalid json
* updated router internal logging
* log.Fatal to t.Error for tests
* Changed from fatal to error failure to set maxprocs
* output ANSI codes for everything but windows for now due to lack of windows support
* added error handling to logger and unit tests
* clear wording on print -> log.print
* added benchmark test
* cleaned up import sections
* Updated logger based on PR requests (added default config options on failure/setting errors)
* ah this should fix travici enc config issue
* Load entire config and clear out logging to hopefully fix travisci issue
* wording & test error handling
* fixed formatting issues based on feedback
* fixed formatting issues based on feedback
* changed CheckDir to use mkdirall instead of mkdir and other changes based on feedback
* Initial overhaul of websocket connection and feeds
* Added proxy support
* Piped to routines.go
* Added new websocket file in exchanges
Refactored orderbook handling into exchange_websocket.go
Added better error responses for binance_websocket.go
General clean for binance_websocket.go
* General fixes - bitfinex_websocket.go
Refactored orderbook cache code - bitfinex_websocket.go
Removed fatal error with unhandled type - routines.go
* Added general improvements to bitmex_websocket.go
Refactored orderbook handling to exchange_websocket.go
Added variable in Item struct in orderbook.go for looking up orders by ID
* Fix issue when routines are blocked due to Data Handler not started
Updated traffic handler
General fixes for bitstamp_websocket.go
* General fixes for coinbasepro_websocket.go
* General fixes for coinut_websocket.go
Fixed error return in exchange_websocket.go
* Removed comments in coinut_wrapper.go
Refactor orderbook logic from hitbtc_websocket.go to exchange_websocket.go
* General fixes
* Removed comments
General fixes
* Updated routines.go
* After rebase fix
* Fixed update config pairs in okcoin.go
* fixed config currency issue in okcoin.go for okcoin China
* exchange_websocket.go
*Removed unused const dec
*Removed state change routine
*Improved trafficMonitor routine
*Increased verbosity for error returns
*Removed uneeded mutex locks
exchange_websocket_test.go
*Added new tests for websocket and orderbook updating
routines.go
*Removed string cased
* Fixed race conditions on sync.waitgroup in exchanges_websocket.go
* Changes variable name in config.go
* Removes unnecessary comment
* Removes indefinite lock on error return
* Removes unnecessary comment
* Adds support for BTCC websocket
Drops support for BTCC REST
* Rewords comment in exchange_websocket.go
Moves types to poloniex_types.go
* Moves types to coinut_types.go
* Removes uneeded range for accessing array variables for coinbase_websocket.go
Removes comments in coinut_types.go
* Adds verbosity flag to GCT
Suppresses verbose output from routines.go
* Fixes setting proxy for REST and Websocket per exchange
Upgrades error handling
Drops unused *url.Url variable in exchange type
* Adds test for setting proxy
* Fixes bug that closes connection due to incorrect timeout time through a proxy connection
* Clarify verbose flag message
