* CI/build: Update Go version, linters and fix minor issues
* Bump golangci-lint to v1.56.1
* BinanceUS: Make uint usage consistent
* Throw blank identifiers into the trash
Calls for limits for margin asset were not doing anything if spot is
enabled.
This caused intermittent failures when the sequence of tests meant
margin was tested before spot, since the limits wouldn't be loaded.
But it also highlighted that API users calling Update Limits for margin
outside the context of a loop on all assets would not get an update.
Also intermittently when the loop of UpdateLimits on assets puts margin first
* Binance: Fix subscription failures ignored
* Testing: Fix race on shared config singleton
* Config: Privatise Global config var
We should *either* use a private var *or* use an accessor, but it
doesn't make sense to mix paradigms.
Since GetConfig() is well established this instead removes the limited uses of direct public access and adds a Setter
* Zip: Fix test failure on http mocks
* Exchanges: Remove Pair upgrade handling
Now redundant behind #1401. These paths should never be met.
Several legacy coin upgrade paths being deprecated as well: ZUSD and CNY
Expecting any users with bad config from 3+ years ago would have to
reset anyway.
Also: At the time the intention of this was to upgrade the config
format.
However now, instead, it'd mostly serve to reset enabled pairs if
there's a config mistake, which doesn't feel right.
* Kraken: Fix typo in Kraken type struct
* Exchanges: Abstract exchange Start() and Run()
* Exchanges: Add test for abstracted Start
* Exchanges: Move Start to Bootstrap
* Simplify waitgroup usage
* Add call to exchange.Bootstrap to allow overide or supplementation
* Exchanges: Concurrent common bootstap actions
* Gateio: Remove incorrect Run in test
* GateIO: Fix pair dependencies in tests
This ensures that the pairs are initialised no more than needed and
kind-of just-in-time.
Better pattern might be to use a function to get these pairs when we
need them.
* Exchanges: Complete UpdatePairs before ExecLims
If we're going to update pairs, it needs to complete before we check for
limits to avoid errors on old pairs
* Exchanges: Remove Start and Run from tmpl
Since they're replaced by bootstrap now and shouldn't need customisation
normally
* Alphapoint: Move Start to Bootstrap
* GateIO: Fix linter shadow var
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* adds open interest to exchanges
* ADDS TESTING YEAH
* New endpoints, BTSE, RPCS, cached
* slight design change, begin gateio
You will need to get cached for
each exchange that supports it
* gateio, huobi, rpc
* fix up kraken, cache retrieval
* okx, gateio
* finalising all implementations and tests
* definitely my final ever commit on this
* Well, well, well
* final v2
* quick fix of bug
* test coverage, assert notempty, test helper
Added a new testhelper for currency
management because its very annoying
in a parallel test setting which wastes
so much space otherwise
* minimises REST requests for Open Interest
* types.Number merge misses
* Minimises Kraken REST calls
* len change, value -> pointer receiver
* further fixup
* fixes gateio, batch calculates open interest
* single gateio, lint const fixes
* rejig and more thorough oi for huobi
* formatting expansion
* minor fix for handling expiring contracts
* rm unused Binance strings
* add bybit support, fix bybit issues
* oopsie doopsie, dont look at my whoopsie
* Fix issue, remove feature
* move an irrelevant function for the pr
* mini bybit upgrades
* fixes cli request bug
This test was failing with `-tags mock_test_off` because the API imposes
a default limit of 500 now, so we'd just get 500 trades and no batching.
If the user doesn't provide a limit, that means we need to assume
batching
* adds funding rate implementations and improvements
* merge fixes x1
* lint
* kucoin funding rates func make
* migrate sync-manager to keys
* some kucoin work
* adds some kucoin wrapper funcs
* ehhh, todo
* kucoin position
* start of orders
* adds the kucoin tests yay
* multiplier
* nits, EWS includes order limits
* NotYetImplemented, IsPerp improvements, cleaning
* lint, test fix, huobi time
* fixes issues, improves testing
* fixes linters I WRECKED
* local lint but remote lint, lint, lint, lint
* fixes err
* skip CI
* lint
* Supported rates, binance endpoints
* fixes weird mocktest problems
* no, CZ is invalid
* fixes some new EWS test errors
* all in a days work
* cleanup
* cleanup for real, also stop it binance.json
* minor coverage
* adds gateio to the slurry
* cleanup of types
* verbose verbose verbose verbose verbose verbose
* fixes huobi parsing issue
* fix bybit contract identification
* cleanup
* merge fixes
* addresses many big problems raised by SHAZ
* tracking errors and fixes
* funding rate if avail, fixes currency formatting
* Addresses nits and sneaks in extra fixes
* lint
* minor fixes after rebase
* better contract splitter for currencies like T-USDT
* forgot to add the exchange name like a fool
* merge fixes x1
* kucoin, direction, contract size
* rn direction, fix kucoin time
* WHOOPS
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* misdirection
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* init
* surprise train commit
* basic distinctions
* the terms of binance are confusing
* renames and introduction of allocatedMargin
* add new margin funcs
* pulling out wires
* implement proper getposition stuff
* bad coding day
* investigate order manager next
* a broken mess, but a progressing one
* finally completes some usdtmargined stuff
* coinMfutures eludes me
* expand to okx
* imports fix
* completes okx wrapper implementations
* cleans and polishes before rpc implementations
* rpc setup, order manager features, exch features
* more rpc, collateral and margin things
* mini test
* looking at rpc response, expansion of features
* reorganising before the storm
* changing how futures requests work
* cleanup and tests of cli usage
* remove silly client side logic
* cleanup
* collateral package, typo fix, margin err, rpc derive
* uses convert.StringToFloat ONLY ON STRUCTS FROM THIS PR
* fix binance order history bug
* niteroos
* adds new funcs to exchange standards testing
* more post merge fixes
* fix binance
* replace simepletimeformat
* fix for merge
* merge fixes
* micro fixes
* order side now required for leverage
* fix up the rest
* global -> portfolio collateral
* Update exchanges/collateral/collateral_test.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* adds fields and todos
* rm field redundancy
* lint fix oopsie daisy
* fixes panic, expands error and cli explanations (sorry shaz)
* ensures casing is appropriate for underlying
* Adds a shiny TODO
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* orderbook: Check assignment of time values and reject if not set.
* linter: fix
* buffer: additional linter winter fixter
* Implement through pending exchanges
* finished push
* linty: minty
* gomod: tidy
* thrasher: nits
* glorious: nits
* orderbook: purge type now in favour of external call allocation
* orderbook: push last param
* orderbook: only 1 unlock call is needed
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* switch over to package defined const for time layout
* bump appveyor playa
* bumperino to latest while setting patherino
* whoooops
* bump VS version set GOROOT
* puge build cache
* Revert "puge build cache"
This reverts commit 315bb578afc19529457f435e52af2172f5143bc5.
* bumperino to test
* purge setting of golang directory for version and allow default
* purge cache state when file change
* whoops
* thrasher: nits
* don't need to flusherino the cacherino
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* initial concept of a nice validation tester for exchanges
* adds some datahandler design
* expand testing
* more tests and fixes
* minor end of day fix for bithumb
* fixes implementation issues
* more test coverage and improvements, but not sure if i should continue
* fix more wrapper implementations
* adds error type, more fixes
* changes signature, fixes implementations
* fixes more wrapper implementations
* one more bit
* more cleanup
* WOW things work?
* lintle 1/1337
* mini bump
* fixes all linting
* neaten
* GetOrderInfo+ asset pair fixes+improvements
* adds new websocket test
* expand ws testing
* fix bug, expand tests, improve implementation
* code coverage of a lot of new codes
* fixes everything
* reverts accidental changes
* minor fixes from reviewing code
* removes Bitfinex cancelBatchOrder implementation
* fixes dumb baby typo for babies
* mini nit fixes
* so many nits to address
* addresses all the nits
* Titlecase
* switcheroo
* removes websocket testing for now
* fix appveyor, minor test fix
* fixes typo, re-kindles killed kode
* skip binance wrapper tests when running CI
* expired context, huobi okx fixes
* kodespull
* fix ordering
* time fix because why not
* fix exmo, others
* hopefully this fixes all of my life's problems
* last thing today
* huobi, more like hypotrophy
* golangci-lint, more like mypooroldknee-splint
* fix huobi times by removing them
* should fix okx currency issues
* blocks the application
* adds last little contingency for pairs
* addresses most nits and new problems
* lovely fixed before seeing why okx sucks
* fixes issues with okx websocket
* the classic receieieivaier
* lintle
* adds test and fixes existing tests
* expands error handling messages during setup
* fixes dumb okx bugs introduced
* quick fix for lint and exmo
* fixes nixes
* fix exmo deposit issue
* lint
* fixes issue with extra asset runs missing
* fix surprise race
* all the lint and merge fixes
* fixes surprise bugs in OKx
* fixes issues with times and chains
* fixing all the merge stuff
* merge fix
* rm logs and a panic potential
* lovely lint lament
* an easy demonstration of scenario, but not of initial purpose
* put it in the bin
* Revert "put it in the bin"
This reverts commit 15c6490f713233d43f10957367fcbf18e3818bdd.
* re-add after immediate error popup
* fix mini poor test design
* okx okay
* merge fixes
* fixes issues discovered in lovely test
* I FORGOT TO COMMIT THIS
* nit fixaroonaboo
* forgoetten test fix
* revert old okx asset intrument work
* fixes
* revert problems I didnt understand. update bybit
* fix merge bugs
* test cleanup
* further improvements
* reshuffle and lint
* rm redundant CI_TEST by rm the CI_TEST field that is redundant
* path fix
* move to its own section, dont run on 32 bit + appveyor
* lint
* fix lbank
* address nits
* let it rip
* fix failing test time range
* niteroo boogaloo
* mod tidy, use common.SimpleTimeFormat
* Binance: Fix Exchange Order Limits not populating
The order of the filters cannot be trusted. New filters have been added
after the 2nd filter, breaking all filter passing afterwards.
This adds a basic test that the data is being populated, but more could
be done on testing.
We should have stricter typing on the filters, perhaps by unmarshalling into
json.RawMessage initially and then into typed stuct fields based on the
filterType. Finally we should spot both missing and unhandled filters, at least in
tests.
* Binance: Add TODO for unhandled filterTypes
* exchanges/sharedtestvalues: implement new functions to handle test skipping and announcements for standardising.
* exchanges: fin test impl.
* linter: fixes
* exchange_template: fix test
* allocate so it doesn't make a panic at the disco
* glorious: nits
* glorious: nits
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* linter: fix
* linter: shhhh
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* wrapper_coverage/exchanges: cancel context to not send rest requests/ populate context through functions that do rest requests
* linter: fix
* exchange_template: fix test
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* kline: Add builder and testing
* Ideas
* kline: deploy builder functionality across GCT
* exchanges: implement across gct
* exchanges: Add tests and fix implementations before kline package testing and veri.
* kline: Add tests and start to fix ConvertToNewInterval
* kline: fix ConvertToNewInterval add tests
* kline: complete overarching tests now on to exchanges
* kline: finish exchange tests and implement limits
* exchanges: more fixes
* linter: fix
* engine: fix tests
* kraken: fix recent trades and other fixes
* zb: fix tests
* bithumb: fix empty insertion
* kline: refactor/optimize CreateKline function
* kline: remove the mooos!
* kline: prealloc CalculateCandleDateRanges
* linter: fix
* exchanges: prealloc extended
* fix whoopsie
* reverse fix because this is a whoopsie
* okx: fix risidual issues
* linter: fix
* kline: initial nits from @gloriouscode
* kline: rename builder -> request and cascade change
* linter: fix + test
* kline: update forced alignment on start and end times when CreateKlineRequest is called.
* nits: more more more
* NITS: Addressed
* tests: fix race issue
* Update exchanges/kline/request.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* kline: add method AddPadding() to automatically fill in holes in kline.Request functionality and reject if missing data when converting
* kline: Add params start and end to addPadding() to insert blanks in between block
* kline: remove test comment code as it's not needed anymore
* kline: fix lint and test
* kline: sort slice without extra bool check every iteration
* okx: fix issues with timeing and candles and such from niterinos & address typo
* Update exchanges/kline/kline.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: niterinos
* Update exchanges/poloniex/poloniex_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits now onto conflicts YAYA!!!
* Update exchanges/exchange_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits again
* thrasher: nitters
* thrasher: niterinos - adds partial flag for incomplete recent candles and fetching.
* kline: rm fmtizzle packageizzle
* glorious: nitters
* glorious: more niterinos
* fix last niterinos
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* binance: adjust outbound start and end time to millisecond
* binance: set correct strings
* binance: convert to unixmilli and fix tests
* nits: fix execution limits, remove deprecated functions, fix tests requiring live tests to stay within a 30day time period.
* binance: rm params unused
* binance: comment fix
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Adds basic PoC for calculating/retrieving position data
* A very unfortunate day of miscalculations
* Adds position summary and funding rate details to RPC
* Offline funding rate calculations
* More helpers, more stats, refining data, automated retrieval
* Adds new rpc server commands and attempts some organisation
* lower string, lower stress
* Adds ordermanager config. Fleshes outcli. Tracks positions automatically
* Adds new separation for funding payments/rates
* Combines funding rates and payments
* Fun test coverage
* ALL THE TESTS... I hope
* Fixes
* polishes ftx tests. improves perp check. Loops rates
* Final touches before nit attax
* buff 💪
* Stops NotYetImplemented spam with one simple trick!
* Some lovely little niteroos
* linteroo
* Clarifies a couple of errors to help narrow likely end user problems
* Fixes asset type bug, fixes closed position order return, fixes unset status bug
* Fixes order manager handling when no rates are available yet
* Continues on no funding rates instead. Removes err
* Don't show predicted rate if the time is zero
* Addresses scenario with no funding rate payments
* Bug fixes and commentary before updating maps to use *currency.Item
* Adds a pair key type
* Polishes pKey, fixes map order bug
* key is not a property in the event someone changes the base/quote
* Adds improvements to order processing...Breaks it all
* Shakes up the design of things by removing a function
* Fixes issues with order manager positions. Limits update range
* Fixes build issues. Identification of bad tests.
* Merges and fixes features from master and this branch
* buff linter 💪
* re-gen
* proto regen
* Addresses some nits. But not all of them.
* Fixes issue where funding rates weren't returned 🎉
* completes transition futures tracking to map[*currency.Item]map[*currency.Item]
* who did that? not me
* removes redundant check on account of being redundant and unnecessary
* so buf
* addresses nits: duplications, startTime, loops, go tidy, typos
* fixes minor mistakes
* fixes 🍣🐻 changes to int64
* few fixes and add ratelimiter
* adds test
* revert configtest.json changes
* configtest updated
* WIP: adds public endpoint support
* WIP: adds public endpoint support
* adds public endpoint support
* WIP: adds auth. endpoint support
* adds test for auth. endpoint
* fixes
* adds auth. endpoint support
* WIP: ws support
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* Testing
* Complete WS spot testing
* adds support for ws events
* minor change
* WIP: adds REST support for CoinMarginedFutures
* Fixes
* WIP: adds REST support for CoinMarginedFutures
* Fixes
* improvement in SPOT REST
* Typo fix
* WIP: add REST support for CMF Account API
* minor fixes
* WIP: add support for CMF conditional orders and few minor fixes
* complete support for CMF conditional orders
* adds support for public CMF endpoint
* adds support for CMF position API
* Complete REST CMF support
* WIP
* Testing REST CMF support
* Testing REST CMF support
* Testing REST CMF support completed
* WIP: add support for UMF
* completed non-auth UMF
* WIP: add support for REST Auth. UMF
* WIP: add support for REST Auth. UMF and some improvements
* WIP
* WIP
* WIP
* completed REST UMF
* renaming
* adds REST support for futures
* add testcases for UMF and some optimizations
* add testcases for futures
* Testing UMF, futures and its changes
* Fixes
* Fixes after testing
* WIP
* WIP
* WIP
* completed ws USDT futures support
* WIP: ws support for futures
* fixes in WS futures
* fixes in WS support
* roll back changes made for WS CMF, USDT and Futures
* fixes
* WIP
* WIP
* fixes
* Steps for new PR
* WIP
* WIP
* WIP
* WIP
* complete PR setup
* fixes for successfully running tests
* update in symbol for futures pair in test file
* WIP
* Fixes in test file and other minor fix
* fix testdata/configtest.json
* reset CONTRIBUTORS file
* review changes
* remove unwanted file
* remove redundant code
* improvisation
* adds comment for exported functions
* remove unwanted TODO and commented code
* fix
* improvisation
* fix
* defined errors
* improvisation
* improvisation
* improvisation
* updates test
* adds comment for exported types
* review changes
* review changes
* fix
* fixes
* Changes for making BYBIT compatible with existing code base
* Test file changes
* Changes for making BYBIT compatible with existing code base
* Changes for making BYBIT compatible with existing code base
* fix lint issues
* fix
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* WIP
* add test cases for new API's
* minor improvements
* add missing API and their tests
* minor fixes
* add bybitTime
* add bybitTimeSec, bybitTimeMilliSec, bybitTimeNanoSec and necessary support
* fix GetTradeHistory function
* error handling
* test fixes
* add GetServerTime API
* adds GetHistoricCandlesExtended and review changes
* test fixes
* minor fix
* integrating CMF Bybit recent change log
* minor fixes
* adds extractCurrencyPair
* minor fixes
* minor fix
* review changes
* adds variable declaration of error
* review commit
* adds embeddable type in API response for all API and integrate it
* fixes
* adds authentication WS connection
* review changes
* review changes
* compatible changes
* adds asset to GetWithdrawalsHistory
* adds asset_type in rpc.proto
* adds asset argument in gctcli withdrawal request command
* improve error handling in exchange API error
* web socket fix
* review changes
* improvements
* improvements
* minor fix
* review changes
* fixing wrapper issues
* fixes
* fixes
* review changes
* add test cases
* fix for GetActiveOrders
* lint fixes
* fixes in websocket
* adds wrapper testcases
* adds wrapper testcases
* adds wrapper testcases
* fixes
* fix issue with GetHistoricCandlesExtended
* fix merge issues
* improving error reporting
* adds wrapper testcases and a minor fix
* gctrpc changes
* adds test cases
fixes in websocket
* review changes for ws
* review changes in WS
* fix gctrpc
* merge fixes
* review changes
* WIP
* updates pair in configs
* adds new asset USDCMarginedFutures
* adds URL const for USDCMarginedFutures
* adds API support
* minor fixes
* adds kline API
* minor fix
* adds API
* adds API
* adds API
* WIP
* WIP
* WIP
* adds support for USDC auth requests to SendAuthHTTPRequest
* adds SendUSDCAuthHTTPRequest
* run test and fix them
* rollback support added for Auth. USDC request inside SendAuthHTTPRequest
* adds API and test cases
* adds API and test cases
* adds APIs and test cases
* adds APIs
* adds rate limit for USDC
* adds USDCMarginedFutures to wrapper
* adds USDC testcases in wrapper and fix few issues
* minor test fixes
* minor test fixes
* fix lint issues
* WIP
* Merge changes
* minor fixes
* remove "else" and optimize
* review changes
* review changes
* review changes
* fix lint issue
* merge fix
* fix test
* fix templates and run them
* changes after merge
* review changes and improvements
* code improvement
* fixes with respect to changes in API response in documentation
* fixed review change in test
* adds check in CancelExistingOrder
* update exchange template
* review changes
* adds GetDepositAddress API
* WIP: adds GetOrderHistory
* complete GetOrderHistory
* fixes
* adds test case
* fixes and add WithdrawFund API
* WIP
* WIP
* updating all SendAuthHTTPRequest call
* adds WithdrawCryptocurrencyFunds
* update test cases
* fix lint issues
* fixes after merge
* adds GetAvailableTransferChains and few fixes
* minor fix in GetDepositAddress
* minor fix with WS ping/pong handling
* add ping handler for WS Auth.
* fix typo mistake
* update doc
* implements futures functions and GRPC functions on new branch
* lint and test fixes
* Fix uneven split pnl. Adds collateral weight test. docs. New clear func
* Test protection if someone has zero collateral
* Uses string instead of double for accuracy
* Fixes old code panic
* context, match, docs
* Addresses Shazniterinos, var names, expanded tests
* Returns subaccount name, provides USD values when offlinecalc
* Fixes oopsie
* Fixes cool bug which allowed made up subaccount results
* Subaccount override on FTX, subaccount results for collateral
* Strenghten collateral account info checks. Improve FTX test
* English is my first language
* Fixes oopsies
* Adds some conceptual futures order details to track PNL
* Initial design of future order processing in the backtester
* Introduces futures concept for collateral and spot/futures config diffs
* Fixes most tests
* Simple designs for collateral funding pair concept
* Expands interface use so much it hurts
* Implements more collateral interfaces
* Adds liquidation, adds strategy, struggles with Binance
* Attempts at getting FTX to work
* Adds calculatePNL as a wrapper function and adds an `IsFutures` asset check
* Successfully loads backtester with collateral currency
* Fails to really get much going for supporting futures
* Merges master changes
* Fleshes out how FTX processes collateral
* Further FTX collateral workings
* hooks up more ftx collateral and pnl calculations
* more funcs to flesh out handling
* Adds more links, just can't fit the pieces together :(
* Greatly expands futures order processing
* Fleshes out position tracker to also handle asset and exchange +testing
* RM linkedOrderID. rn positioncontroller, unexport
* Successfully tracks futures order positions
* Fails to calculate PNL
* Calculates pnl from orders accurately with exception to flipping orders
* Calculates PNL from orders
* Adds another controller layer to make it ez from orderstore
* Backtester now compiles. Adds test coverage
* labels things add scaling collateral test
* Calculates pnl in line with fees
* Mostly accurate PNL, with exception to appending with diff prices
* Adds locks, adds rpc function
* grpc implementations
* Gracefully handles rpc function
* beautiful tests!
* rejiggles tests to polish
* Finishes FTX testing, adds comments
* Exposes collateral calculations to rpc
* Adds commands and testing for rpcserver.go functions
* Increase testing and fix up backtester code
* Returns cool changes to original branch
* end of day fixes
* Fixing some tests
* Fixing tests 🎉
* Fixes all the tests
* Splits the backtester setup and running into different files
* Merge, minor fixes
* Messing with some strategy updates
* Failed understanding at collateral usage
* Begins the creation of cash and carry strategy
* Adds underlying pair, adds filldependentevent for futures
* Completes fill prerequsite event implementation. Can't short though
* Some bug fixes
* investigating funds
* CAN NOW CREATE A SHORT ORDER
* Minor change in short size
* Fixes for unrealised PNL & collateral rendering
* Fixes lint and tests
* Adds some verbosity
* Updates to pnl calc
* Tracks pnl for short orders, minor update to strategy
* Close and open event based on conditions
* Adds pnl data for currency statistics
* Working through PNL calculation automatically. Now panics
* Adds tracking, is blocked from design
* Work to flesh out closing a position
* vain attempts at tracking zeroing out bugs
* woww, super fun new subloggers 🎉
* Begins attempt at automatically handling contracts and collateral based on direction
* Merge master + fixes
* Investigating issues with pnl and holdings
* Minor pnl fixes
* Fixes future position sizing, needs contract sizing
* Can render pnl results, focussing on funding statistics
* tracking candles for futures, but why not btc
* Improves funding statistics
* Colours and stats
* Fixes collateral and snapshot bugs
* Completes test
* Fixes totals bug
* Fix double buy, expand stats, fixes usd totals, introduce interface
* Begins report formatting and calculations
* Appends pnl to receiving curr. Fixes map[time]. accurate USD
* Improves report output rendering
* PNL stats in report. New tests for futures
* Fixes existing tests before adding new coverage
* Test coverage
* Completes portfolio coverage
* Increase coverage exchange, portfolio. fix size bug. NEW CHART
* WHAT IS GOING ON WITH PNL
* Fixes PNL calculation. Adds ability to skip om futures tracking
* minor commit before merge
* Adds basic liquidation to backtester
* Changes liquidation to order based
* Liquidationnnnnn
* Further fleshes out liquidations
* Completes liquidations in a honorable manner. Adds AppendReasonf
* Beginnings of spot futures gap chart. Needs to link currencies to render difference
* Removes fake liquidation. Adds cool new chart
* Fixes somet tests,allows for zero fee value v nil distinction,New tests
* Some annoying test fixes that took too long
* portfolio coverage
* holding coverage, privatisation funding
* Testwork
* boring tests
* engine coverage
* More backtesting coverage
* Funding, strategy, report test coverage
* Completes coverage of report package
* Documentation, fixes some assumptions on asset errors
* Changes before master merge
* Lint and Tests
* defaults to non-coloured rendering
* Chart rendering
* Fixes surprise non-local-lints
* Niterinos to the extremeos
* Fixes merge problems
* The linter splintered across the glinting plinths
* Many nits addressed. Now sells spot position on final candle
* Adds forgotten coverage
* Adds ability to size futures contracts to match spot positions.
* fixes order sell sizing
* Adds tests to sizing. Fixes charting issue
* clint splintered the linters with flint
* Improves stats, stat rendering
* minifix
* Fixes tests and fee bug
* Merge fixeroos
* Microfixes
* Updates orderPNL on first Correctly utilises fees. Adds committed funds
* New base funcs. New order summary
* Fun test updates
* Fix logo colouring
* Fixes niteroonies
* Fix report
* BAD COMMIT
* Fixes funding issues.Updates default fee rates.Combines cashcarry case
* doc regen
* Now returns err
* Fixes sizing bug issue introduced in PR
* Fixes fun fee/total US value bug
* Fix chart bug. Show log charts with disclaimer
* sellside fee
* fixes fee and slippage view
* Fixed slippage price issue
* Fixes calculation and removes rendering
* Fixes stats and some rendering
* Merge fix
* Fixes merge issues
* go mod tidy, lint updates
* New linter attempt
* Version bump in appveyor and makefile
* Regex filename, config fixes, template h2 fixes
* Removes bad stats.
* neatens config builder. Moves filename generator
* Fixes issue where linter wants to fix my spelling
* Fixes pointers and starts
* orders: deprecate SubmitResponse return and change to *order.Detail construct detail from order.Submit struct
* orders: add coverage, fix tests
* coinut: rm test for checking
* orders: revert change for return and change field ID to a more explicit name OrderID
* orders: Add method to see if the order was placed
* order: change field name in Cancel type to be more explicit
* orders: standardize field -> OrderID
* backtester: populate change
* orders: add test
* gctscript: fix field name
* linter: fix issues
* linter: more fixes
* linter: forever
* exchanges_tests: populate order.Submit field exchange name
* Update exchanges/order/order_types.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/order/orders.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* glorious: nits
* thrasher: nits
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* orders: add method to Limit to retrieve order execution limit snapshots
* currency/btcmarkets: add error and update field name to standard
* linter: fix
* limts: don't return pointer
* limit: Add notes
* glorious: nits
* linter: fix
* limit: reinstate nil check
* exchanges: change field names to be more consistent (@thrasher-) suggestion
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* implements futures functions and GRPC functions on new branch
* lint and test fixes
* Fix uneven split pnl. Adds collateral weight test. docs. New clear func
* Test protection if someone has zero collateral
* Uses string instead of double for accuracy
* Fixes old code panic
* context, match, docs
* Addresses Shazniterinos, var names, expanded tests
* Returns subaccount name, provides USD values when offlinecalc
* Fixes oopsie
* Fixes cool bug which allowed made up subaccount results
* Subaccount override on FTX, subaccount results for collateral
* Strenghten collateral account info checks. Improve FTX test
* English is my first language
* Fixes oopsies
* Fixes for unrealised PNL & collateral rendering
* Fixes lint and tests
* Shaznit fixes
* Secret Shaznit
* Updates account information across wrappers to include more fields
* Updates online collateral calculations. Updates RPC data
* Accurately calculates collateral offline and online minus testing
* Tests and lint chocolate
* Simplifies accountinfo results
* Fixes shaznits
* Adds new func
* Increases collateral accuracy again again again x 200
* Increases accuracy of collateral rendering
* Fixes minor merge/test issues
* Linterino
* Fixes ws test. Improves collateral calculations and rendering
* Make it prettier
* Removes the lock I put on 👀
* Adds `additional_collateral_used` field, renders orig currency
* Fixes unrelated test
* Fix test
* Correctly calculate spot margin borrow collateral
* Address fun lint surprise
See https://github.com/golangci/golangci-lint/issues/741#issuecomment-1017014331
* Strange lint fixing x2
* Continued lint journey
* Nolint the nolint to not lint the lint
* Adds two new fields to response
* More linting issues arising
* fIX3s_c4s|NG
* Fixes command flags' incorrect numbering
* FairMarket = Won
* currency: Add method to derive pair
* currency: Add method to lower entire charset but used the slice copy and returned that. This will change the original, just gotta see if this is an issue, but the slice usually goes out of scope anyway.
* currency/pairs: add filter method
* currency: add function to derive select currencies from currency pairs
* currency/engine: slight adjustments
* currency: fix linter issue also shift burden of proof to caller instead of repair, more performant.
* currency: more linter
* pairs: optimize; reduce allocs/op and B/op
* currency: Add in function 'NewPairsFromString' for testing purposes
* currency: don't suppress error
* currency: stop panic on empty currency code
* currency: Add helper method to match currencies between exchanges
* currency: fixed my bad spelling
* currency: Implement stable coin checks, refactored base code methods, optimized upper and lower case strings for currency code/pairs
* currency: add pairs method to derive stable coins from internal list.
* Currency: Cleanup, fix tests.
* engine/exchanges/currency: fix whoops
* Currency: force govet no copy on Item datatype
* Currency: fix naughty linter issues
* exchange: revert change
* currency/config: fix config upgrade mistake
* currency: re-implement currency sub-systems
* *RetrieveConfigCurrencyPairs removed
*CheckCurrencyConfigValues to only provide warnings, add additional support when, disable when support is lost or not available and set default values.
*Drop Cryptocurrencies from configuration as this is not needed.
*Drop REST Poll delay field as this was unused.
*Update default values for currencyFileUpdateDuration & foreignExchangeUpdateDuration.
*Allow Role to be marshalled for file type.
*Refactor RunUpdater to verify and check config values and set default running foreign exchange provider.
* currency: cleanup
* currency: change match -> equal for comparison which is more of a standard and little easier to find
* currency: address nits
* currency: fix whoops
* currency: Add some more pairs methods
* currency: linter issues
* currency: RM unused field
* currency: rm verbose
* currency: fix word
* currency: gocritic
* currency: fix another whoopsie
* example_config: default to show log system name
* Currency: Force all support packages to use Equal method for comparison as there is a small comparison bug when checking upper and lower casing, this has a more of a pronounced impact between exchanges and client instances of currency generation
* currency: fix log name
* ordermanager: fix potential panic
* currency: small optim.
* engine: display correct bool and force shutdown
* currency: add function and fix regression
* Change ConvertCurrency -> ConvertFiat to be more precise
* ADD GetForeignExchangeRate to get specific exchange rate for fiat pair
* Fix currency display and formatting regression and tied in with config.Currency fields
* engine: fix tests
* currency: return the amount when no conversion needs to take place
* currency: reduce method name
* currency: Address nits glorious nits
* currency: fix linter
* currency: addr nits
* currency: check underlying role in test
* gct: change to EMPTYCODE and EMPTYPAIR across codebase
* currency: fix nits
* currency: this fixes test race but this issue has not been resolved. Please see: https://trello.com/c/54eizOIo/143-currency-package-upgrades
* currency: Add temp dir for testing
* Update engine/engine.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* documentation: update and regen
* currency: Address niterinos
* currency: Add test case for config upgrade when falling over to exchange rate host as default from exchangeRates provider
* currency: addr nits
* currency: fix whoops
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* cmd/tools/exchange: fix regression and implement reflection so as this can dynamically scale to our interface
* exchanges: add comment and fix whoopsie
* exchanges: fix linter issues
* wrapper_cov_tool: add actual full interface method count to get a better perceived deployment
* exchanges/tool: addr glorious nits
* kraken: remove string in test
* exchange_template_tool: fix tmpl issue
* exchanges/binance: proper arguments order when calling Binance.FuturesNewOrder
* exchanges/binance: adapt FuturesOrderPlaceData (+ unmarshaling) to latest coin/delivery futures API
* exchanges/binance: introduce futuresNewOrderRequest and use it to pass order parameters for coin margined futures
* exchanges/binance: test json unmarshaling of FuturesOrderPlaceData
* exchanges/binance: reorder fields as per docs, include missing fields (also in tests)
* exchanges/binance/coinm: use constants instead of hard coded strings (also fixes linting)
* exchanges/binance/coinm: pass futuresNewOrderRequest by reference
* exchanges/binance/coinm: expose FuturesNewOrderRequest
* exchanges/binance/coinm: do not explicitly assign default values fields of FuturesNewOrderRequest
* exchanges/binance/coinm: document FuturesNewOrderRequest
* exchanges/binance/coinm: expose all fields of FuturesNewOrderRequest
* exchanges/binance/coinm: expose fields of FuturesNewOrderRequest
* exchange/binance/coin: order submission: add support for priceProtect
Co-authored-by: Yordan Miladinov <jordanmiladinov@gmail.bg>
* golangci-lint/CI: Bump versions
Fix remaining linter issues
* Specifically set AppVeyor version
* Fix the infamous typos 👀
* Add go env cmd to AppVeyor
* Add go version cmd to AppVeyor
* Specify AppVeyor image, adjust linters
* Update go get to go install due to deprecation
* Bump golangci-lint timeout time for AppVeyor
* Change NW contract to NQ
* Address nitters
* GetRandomPair -> Pair{}
* Address nits
* Address time nitterinos plus additional tweaks
* More time inception upgrades!
* Bending time and space
* gct: phase one context awareness pass
* exchanges: context propagation pass
* common/requester: force context requirement
* gctcli/exchanges: linter fix
* rpcserver: fix test using dummy rpc server
* backtester: fix comments
* grpc: add correct cancel and timeout for commands
* rpcserver_test: add comment on dummy server
* common: deprecated SendHTTPGetRequest
* linter: fix
* linter: turn on no context check
* apichecker: fix context linter issue
* binance: use param context
* common: remove checks as this gets executed before main
* common: change mutex to RW as clients can be used by multiple go routines.
* common: remove init and JIT default client. Unexport global variables and add protection.
* common: Add comments
* bithumb: after dinner mints fix
* websocket: select case error if no receiver, add in functionality to reset to initial sync for books on a new websocket connection
* websocket: fix tests
* websocket: log error instead of losing it
* websocket: fix whoopsie
* exchanges: fix test
* websocket: force requirement of specific functionality
* exchanges: fix tests
* exchanges/websocket: move waitgroup add before scheduling across exchanges
* gateio: add feature subscribe
* bithumb/bittrex: include connection state reset, fix reconnection bug for Bithumb
* huobi: Add listen to shutdown to routine so it actually returns and stops being a naughty boy.
* huobi: add missing waitgroup add.
* exchanges: bleed comms channels
* binance: fix reconnection bug with buffer
* bithumb: fix reconnection bug with ws orderbook when websocket is diabled/enabled
* bithumb/bittrex: add bleeders for ws orderbook jobs
* linter: fix
* kraken: reduce code block from double assertion
* This bug ruined my day.
* glorious: error checking
* zb: add correct path for websocket connection
* exchange: Add verbosity when config conflicts and overwrites default values
* zb: add https to path
* exchanges: glorious nits
* stream: Add checkAndSetMonitoring to reduce potential routine bundling, increase timeout and check state in tests
* stream: remove check that is not needed.
* glorious: nits addr.
* lint: test
* golangci: Enable err checking linter to expose unchecked errors.
* gct: handle errors across the board
* gct: handle errors NOTE: Found bug in FTX (WIP)
* linter: fix issues
* ftx/exchanges: fix bug where error was being returned when setting pair management variables to an already enabled state
* bitmex: fix bug where a dangly supported asset in config danglied up the place.
* linter: fix more linter issues
* linter: fix my terrible spelling.
* currency: fix test
* exchanges: fix tests
* logger: fix test
* exchanges: fix tests
* glorious: nits
* vm: revert rm variable and instigate test
* exchanges: add an UpdateTickers method to the main exchange interface
This method will fetch all currency pair tickers of a given asset type
and update them internally, does nothing for now.
* exchanges: refactor UpdateTicker on all exchanges
Keep the exact previous behaviour but implement the UpdateTickers
method and refactor UpdateTicker by using it where applicable.
* sync_manager: update all tickers when batching is enabled
* binance: UpdateTicker to fetch single ticker symbol
* ftx: UpdateTicker to fetch single ticker symbol
* exchange/binance/websocket:
1. resolve order type by reading the dedicated executionReport field (X)
2. populate average price (computed as advised in docs: Z/z)
3. fee taken is now assigned to order.Detail.Fee (not to order.Detail.Cost)
4. proper order.Detail.Cost and order.Detail.CostAsset
* order.Detail: add a new field: FeeAsset
* exchange/binance/websocket: wsOrderUpdate: assign FeeAsset
* exchange/binance/websocket: wsOrderUpdate: use TransactionTime instead of EventTime (more precise) and populate order.Detail.TargetAmount
* exchange/binance/websocket: wsOrderUpdate: use full name for variables (isn't obvious otherwise), do not mix var and :=, order temporary variable by their order in order.Detail
* exchange/binance/websocket: order fields of WsOrderUpdateData by the documented/received-over-the-websocket order of fields
* exchange/binance/websocket: add explicitly "M" as WsOrderUpdateData.Ignored2, which would otherwise override small "m"
* exchange/binance/websocket: check for zero when computing averagePrice
* exchange/binance/test: update TestExecutionTypeToOrderStatus and TestWsOrderExecutionReport
* exchange/binance/websocket: wsOrderUpdate now reports cost thus far, not the total order cost as that cannot be predicted in the case of partially filled orders
* exchange/ftx/websocket: WsOrderDataStore now reports cost thus far, not the total order cost as that cannot be predicted in the case of partially filled orders
* exchange/binance/websocket: executionReport now does not set TargetAmount as it is not applicable
* exchanges: binance/websocket and ftx/websocket now properly set Date and LastUpdated time fields when reporting a trade
* exchange/binance/websocket: check if WsOrderUpdateData.CommissionAsset is populated when assigning feeAsset
* exchange/binance/test: fix TestWsOrderExecutionReport
* * Binance websocket: set commission of order Detail
* * Binance websocket: set commissionAsset of order.Detail
* * Binance websocket: change CostAsset to type currency.Code
* * Binance websocket: call NewCode after checking CommissionAsset is not empty. This guarantees that NULL CommissionAsset is mapped to an empty order.Detail.CostAsset. Otherwise, reflect.DeepEqual will fail on test. Update TestWsOrderExecutionReport json message to BTC commission.
* * Binance websocket: binance websocket "ExecutionReport" only provides "trade" status (partially filled), so check that executed amount == total amount before change status to filled
