* Websocket: Remove IsInit and simplify SetProxyAddress
IsInit was basically the same as IsConnected.
Any time Connect was called both would be set to true.
Any time we had a disconnect they'd both be set to false
Shutdown() incorrectly didn't setInit(false)
SetProxyAddress simplified to only reconnect a connected Websocket.
Any other state means it hasn't been Connected, or it's about to
reconnect anyway.
There's no handling for IsConnecting previously, either, so I've wrapped
that behind the main mutex.
* Websocket: Expand and Assertify tests
* Websocket: Simplify state transistions
* Websocket: Simplify Connecting/Connected state
* Websocket: Tests and errors for websocket
* Websocket: Make WebsocketNotEnabled a real error
This allows for testing and avoids the repetition.
If each returned error is a error.New() you can never use errors.Is()
* Websocket: Add more testable errors
* Websocket: Improve GenerateMessageID test
Testing just the last id doesn't feel very robust
* Websocket: Protect Setup() from races
* Websocket: Use atomics instead of mutex
This was spurred by looking at the setState call in trafficMonitor and
the effect on blocking and efficiency.
With the new atomic types in Go 1.19, and the small types in use here,
atomics should be safe for our usage. bools should be truly atomic,
and uint32 is atomic when the accepted value range is less than one byte/uint8 since
that can be written atomicly by concurrent processors.
Maybe that's not even a factor any more, however we don't even have to worry enough to check.
* Websocket: Fix and simplify traffic monitor
trafficMonitor had a check throttle at the end of the for loop to stop it just gobbling the (blocking) trafficAlert channel non-stop.
That makes sense, except that nothing is sent to the trafficAlert channel if there's no listener.
So that means that it's out by one second on the trafficAlert, because any traffic received during the pause is doesn't try to send a traffic alert.
The unstopped timer is deliberately leaked for later GC when shutdown.
It won't delay/block anything, and it's a trivial memory leak during an infrequent event.
Deliberately Choosing to recreate the timer each time instead of using Stop, drain and reset
* Websocket: Split traficMonitor test on behaviours
* Websocket: Remove trafficMonitor connected status
trafficMonitor does not need to set the connection to be connected.
Connect() does that. Anything after that should result in a full
shutdown and restart. It can't and shouldn't become connected
unexpectedly, and this is most likely a race anyway.
Also dropped trafficCheckInterval to 100ms to mitigate races of traffic
alerts being buffered for too long.
* Websocket: Set disconnected earlier in Shutdown
This caused a possible race where state is still connected, but we start
to trigger interested actors via ShutdownC and Wait.
They may check state and then call Shutdown again, such as
trafficMonitor
* Websocket: Wait 5s for slow tests to pass traffic draining
Keep getting failures upstream on test rigs.
Think they can be very contended, so this pushes the boundary right out
to 5s
* CI/build: Update Go version, linters and fix minor issues
* Bump golangci-lint to v1.56.1
* BinanceUS: Make uint usage consistent
* Throw blank identifiers into the trash
* Exchanges: Remove Pair upgrade handling
Now redundant behind #1401. These paths should never be met.
Several legacy coin upgrade paths being deprecated as well: ZUSD and CNY
Expecting any users with bad config from 3+ years ago would have to
reset anyway.
Also: At the time the intention of this was to upgrade the config
format.
However now, instead, it'd mostly serve to reset enabled pairs if
there's a config mistake, which doesn't feel right.
* Kraken: Fix typo in Kraken type struct
* Exchanges: Abstract exchange Start() and Run()
* Exchanges: Add test for abstracted Start
* Exchanges: Move Start to Bootstrap
* Simplify waitgroup usage
* Add call to exchange.Bootstrap to allow overide or supplementation
* Exchanges: Concurrent common bootstap actions
* Gateio: Remove incorrect Run in test
* GateIO: Fix pair dependencies in tests
This ensures that the pairs are initialised no more than needed and
kind-of just-in-time.
Better pattern might be to use a function to get these pairs when we
need them.
* Exchanges: Complete UpdatePairs before ExecLims
If we're going to update pairs, it needs to complete before we check for
limits to avoid errors on old pairs
* Exchanges: Remove Start and Run from tmpl
Since they're replaced by bootstrap now and shouldn't need customisation
normally
* Alphapoint: Move Start to Bootstrap
* GateIO: Fix linter shadow var
* Bitfinex: Handle Errors in tickers without panic
* Bitfinex: Use TypeAssertError for tickers
* Bitfinex: Refactor and improve ticker handling
* Unify Ticker response handling
* Simplify/Humanify errors in parsing ticker responses
* Remove polymorphic response handling for < 10 fields, seems [antiquated according to docs](https://docs.bitfinex.com/reference/rest-public-ticker)
* Add test coverage for tickers
* Bitfinex: Ignore resp format errs in GetTickers
We're still getting:
`received 'invalid ticker response format for tALT2612:USD field BidSize
from [100 <nil> 100 <nil> <nil> <nil> <nil> <nil> <nil> <nil>]`
too frequently right now.
Considered:
* Special casing tALT2612:*; However if it's happening with this curr
it'll probably happen again
* Warning about the error; However it'd just be persistent,
unactionable and annoying noise in the logs of a running server
So the conclusion is to just silently ignore it
* Bitfinex: Accept locked market in TestUpdateTicker
* Websockets: Move Subscription to its own package
This allows the small type to be imported from both `config` and from
`stream` without an import cycle, so we don't have to repeat ourselves
* Subs: Renamed Currency to Pair
This was being mis-used through much of the code, and since we're
already touching everything, we might as well fix it
* Websockets: Add Subscription configuration
* Binance: Add subscription configuration
* Kucoin: Subscription configuration
* Simplify GenerateDefaultSubs
* Improve TestGenSubs coverage
* Test Candle Sub generation
* Support Candle intervals
* Full responsibility for formatting Channel name on GenerateDefaultSubs
OR consumer of Subscribe
* Simplify generatePayloads as a result
* Fix test coverage of asset types in processMarketSnapshot
* Exchanges: Abstract ParallelChanOp
* Tests: Generic ws mock instances
* Kucoin: Fix intermittent conflict in test currs
Use isolated test instance for `TestGetOpenInterest`.
`TestGetOpenInterest` would occassionally change pairs before
GenerateDefault Subs.
* adds open interest to exchanges
* ADDS TESTING YEAH
* New endpoints, BTSE, RPCS, cached
* slight design change, begin gateio
You will need to get cached for
each exchange that supports it
* gateio, huobi, rpc
* fix up kraken, cache retrieval
* okx, gateio
* finalising all implementations and tests
* definitely my final ever commit on this
* Well, well, well
* final v2
* quick fix of bug
* test coverage, assert notempty, test helper
Added a new testhelper for currency
management because its very annoying
in a parallel test setting which wastes
so much space otherwise
* minimises REST requests for Open Interest
* types.Number merge misses
* Minimises Kraken REST calls
* len change, value -> pointer receiver
* further fixup
* fixes gateio, batch calculates open interest
* single gateio, lint const fixes
* rejig and more thorough oi for huobi
* formatting expansion
* minor fix for handling expiring contracts
* rm unused Binance strings
* add bybit support, fix bybit issues
* oopsie doopsie, dont look at my whoopsie
* Fix issue, remove feature
* move an irrelevant function for the pr
* mini bybit upgrades
* fixes cli request bug
* Bitfinex: Fix TestUpdateTickers on ICE
Accept 5% failure rate of available pairs not working as tickers.
When Bitfinex [delisted ICE](https://www.bitfinex.com/posts/990) it's still coming back in all pub:conf and pub:info listings:
```
❯ curl -s https://api.bitfinex.com/v2/conf/pub:info:pair | jq -c '.[0][] | select(.[0] | test("(BTC|ICE|ZIL)USD")) ' ["BTCUSD",[null,null,null,"0.00006","2000.0",null,null,null,0.1,0.05,null,null]]
["ICEUSD",[null,null,null,"4.0","25000.0",null,null,null,null,null,null,null]]
["ZILUSD",[null,null,null,"40.0","1500000.0",null,null,null,null,null,null,null]]
```
_( I included ZIL to show a tradable pair without Margin fields )_
There's absolutely no sign it's not a tradable pair _until_ you ask for a ticker for it:
```
❯ curl -s https://api.bitfinex.com/v2/ticker/tICEUSD ["error",10020,"symbol: invalid"]⏎
❯ curl -s https://api.bitfinex.com/v2/ticker/tBTCUSD [42854,11.8920918,42855,12.71095442,-290,-0.00672292,42846,725.08132142,43288,41850]⏎
```
* fixup! Bitfinex: Fix TestUpdateTickers on ICE
* fixup! Bitfinex: Fix TestUpdateTickers on ICE
* Bitfinex: Fix UpdateTickers stopping on first error
* Bitfinex: Replace errTypeAssert with common.GetTypeAssertError
* Bitfinex/common.GetTypeAssertError description to match the documentation
* Bitfinex/Correct typos, fix type in finalResp error
* Bitfinex: Comments amended from.Symbol to .Data
* Bitfinex: fix the typo
* Bitfinex: fix the comments
* adds funding rate implementations and improvements
* merge fixes x1
* lint
* kucoin funding rates func make
* migrate sync-manager to keys
* some kucoin work
* adds some kucoin wrapper funcs
* ehhh, todo
* kucoin position
* start of orders
* adds the kucoin tests yay
* multiplier
* nits, EWS includes order limits
* NotYetImplemented, IsPerp improvements, cleaning
* lint, test fix, huobi time
* fixes issues, improves testing
* fixes linters I WRECKED
* local lint but remote lint, lint, lint, lint
* fixes err
* skip CI
* lint
* Supported rates, binance endpoints
* fixes weird mocktest problems
* no, CZ is invalid
* fixes some new EWS test errors
* Websockets: Add keys to websocket subscriptions
* This switches all RO uses of the mutex to use a RLock method.
* The mutex used for discrete field access has had scope drift from
name 'connectionMutex' so rename to more appropriate fieldsMutex
* The mutex used for Set/CanUseAuthEndpoints moves from the
subscriptions endpoint to the fieldsMutex
* Add GetSubscription by key
* Expose stream.Matcher type
* Bitfinex: Subscribe and Unsubscribe atomicly
* Fix Auth failures ignored
* This change makes it so that Subscribe and Unsubscribe wait for success
** Tells the DataHandler about errors
** Errors are returned to consumers
* Subscribes concurrently to the channels
* It also simplifies the chanId to stream mapping
* Removes unable to locate chanID: %d errors which are just noise
* Paves the way for unified channelSubscription id handling
* Adds support for subId for Book subscriptions, which is more robust
* Vastly simplifies what we need to test TestWsSubscribedResponse
This test was working to ensure that the various fancy key parsing
mechanisms all worked. Now that we use subId, we just need a thorough
test of that
* Expose Match.Set in order to capture websocket incoming data
Can't see another way of doing this. Doesn't seem too bad
* Allow tests to run with auth or WS
These flags made it difficult to run the tests whilst working on
websockets
* Enable API auth and WS in testconfig
This change minimises the changes requires for a full test run against
live endpoints, so that new contributors have a clearer testing path.
I cannot see any reason to turn WS off and Auth endpoints off when we're
not going to run API tests without Creds being set, and we're not going
to do live fire tests without canManipulateRealOrders
* TestWsSubscribe and various fixes
** Enables the websocket for live non-authed integration tests by default
** Adds an integration test for subscriptions
** Changes the Ws tests to respect canManipulateRealOrders
** Uses WsConnect instead of setupWs; fixes seqNo config not sent for WS tests
** Allows api creds to live in config/testdata.json which might be
less likely to accidentally commit, and less obtrusive
* Bitfinex: Support period and timeframe for Candles
* Fixes manual Subscribe() symbol or key formatting
* Unifies handling of params for DefaultSubscriptions and manual
subsrciptions
* Bitfinex: Handle conf and info WS channel events
* Bitfinex: Better tests for subscriptions
* fixup! Websockets: Add keys to websocket subscriptions
* fixup! Bitfinex: Subscribe and Unsubscribe atomicly
* fixup! Websockets: Add keys to websocket subscriptions
* Websockets: Add Pending subscription status
Add a status tracker so that Sub/Unsub can prevent duplicates,
and also fixes when first message comes before we have added the sub
to the tracker
* Websockets: Add State instead of pending
This change allows more clarity about the current state and
checks for specifically already Unsubing
* Bitfinex: Fix first sub message maybe lost
The only link we have between a sub req and the sub resp is the subID.
And the only link we have between a sub message and the sub is the chanID.
We can't derive a link using Pair or anything else.
This meant that by sending the resp and its chanID down the IncomingData
channel, we allowed the channel reader to maybe process the next
message, the first message on the channel, before the runtime executed
the switch back to subscribeToChan waiting on the chan.
To fix this, we key initially on subId.(string), and then replace it
with chanId.(int64) when we have it *inside* the wsHandleData so we
know we've procedurally handled it before the next message.
subscribeToChan is then free to remove the subId keyed Sub regardless of
error or not
If there's an error, we don't need to inline handling because there
won't be any second update.
Expands test coverage to make sure those subId keyed subscriptions are
removed.
* Websocket: Validate state in SetChanState
* fixup! Bitfinex: Fix first sub message maybe lost
* Websockets: Rename RemoveUnsuccessfulSubs
Implementation doesn't imply Unsuccessful or need to.
This change supports the registering of Pending subs
* Bitfinex: Fix race in Tests
* OrderManager: Fix race condition in submit with ws
If the ws sees the order before processSubmittedOrder then it will have
assigned it an internal order id already and added it to the store.
Don't treat that as an error. Instead just use the newer ws details
* OrderManager: Fix error comparisson
Should always use errors.Is when possible
* Tests: Simplify btcusd test pair declaration
* OrderManager: Improve test readability
* OrderManager: Add orderstore.getByDetail test
* Return a fresh pointer from orderstore.getByDetail
This protects the order.Details in the store from direct access.
The use-case was to allow the returned objects to be references so that
future changes to them would be reflected.
However we're not ready yet to allow people to touch the orders
directly, because they're not protected directly by a mutex, and nothing
would stop consumers contaminating the integrity of the data.
We can revisit this topic later atomicly, but it's definitely tangental
to the cause of action for PR #1336.
* Fix GetByDetail tests to assert a new pointer
* OrderManager: Avoid possible lock races
This fix internalises the getByDetail because the implication of moving
lock ownership out of exists/getByDetail to consumers breaks the order
store struct encapsulation in a way we really don't want to.
It's also more efficient
* Fix spelling mistake
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* OrderManager: Fix TestSubmitOrder... description
* OrderManager: Improve clarity of comment
* OrderManager: Capitalise error message
On failure to add to orderstore, capitalise the error message
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
---------
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* all in a days work
* cleanup
* cleanup for real, also stop it binance.json
* minor coverage
* adds gateio to the slurry
* cleanup of types
* verbose verbose verbose verbose verbose verbose
* fixes huobi parsing issue
* fix bybit contract identification
* cleanup
* merge fixes
* addresses many big problems raised by SHAZ
* tracking errors and fixes
* funding rate if avail, fixes currency formatting
* Addresses nits and sneaks in extra fixes
* lint
* minor fixes after rebase
* better contract splitter for currencies like T-USDT
* forgot to add the exchange name like a fool
* merge fixes x1
* kucoin, direction, contract size
* rn direction, fix kucoin time
* WHOOPS
* Update exchanges/kucoin/kucoin_wrapper.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* misdirection
---------
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* exchanges: Add function to get standard config
* exchanges: add tests (cherry-pick here and above)
* after pick stuff
* cleanup
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* orderbook: Check assignment of time values and reject if not set.
* linter: fix
* buffer: additional linter winter fixter
* Implement through pending exchanges
* finished push
* linty: minty
* gomod: tidy
* thrasher: nits
* glorious: nits
* orderbook: purge type now in favour of external call allocation
* orderbook: push last param
* orderbook: only 1 unlock call is needed
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Bitfinex: Fix cancel/update order WS ack not seen
Fixes#1288
* Bitfinex: Fix ws Unsubscribe and Resubscribe
Unsubscribe needed to use the channel id.
Resubscribe needs to have the original subscription params.
* Bitfinex: Fix ws Trades Fees on te
The ws channel for authenticated Trades sends two types of update:
* te, Trade Executed
* tu, Trade Execution Update
Only the second one contains fee information.
[See the docs](https://docs.bitfinex.com/reference/ws-auth-trades)
This commit fixes:
`exchange Bitfinex websocket error - unable to type assert trade fee`
after an executed market trade on the te update
* Bitfinex: Fix error on ws auth ok
This fixes:
`Bitfinex Could not find an existing channel subscription: account Pair:
ChannelID: 0`
It's not clear from history why we'd want to store a reference to the
ubiquitous 0 channel like this, but it's definitely wrong, and anything
that attempts to get channel information about 0 chan needs to be fixed
anyway.
* Bitfinex: Refactor wsUpdate handling
This commit doesn't break out all the sub-updater, but attempts to do
something about the unmanagable size of ws update handling
* Binfinex: Fix linter issue on chanId casing
* Bitfinex: Fix linter outdent complaint
* Bitfinex: Fix linter issues on test
* Bitfinex: Fix TestWsTradingPairSnapshot chan lookup
* Bitfinex: Remove unnecessary WsAddSubs in test
* Bitfinex: Fix TestWsSubscribedResponse chan
* Bitfinex: Throw a specific error for bad event
* Bitfinex: WS Type assertions for positionSnapshots
* Bitfinex: tradeUpdate type assertion
* Bitfinex: Reinstate default subscriptions
* Bitfinex: Assert chan assetType is the same
* Bitfinex: Lowercase error string
* Bitfinex: Refactor WS eventType/chanId handling
* Bitfinex: Fix linter issues
* Bitfinex: Fix delimiter for pairs with more than 6 chars
* Bitfinex: Fix WS handling of subscribed symbols
This simplifies the handling of subscription symbols.
Now that we know the channel up front from handling the subscribed
response we can limit the parsing forms needed
* Bitfinex: Placate the linter
* Bitfinex: Disable margin assets for WS
Margin WS Currently not fully implemented and causes subscription collisions with spot
* Bitfinex: Fix parsing of 4 part funding keys
This improves overall handling and errors on a few current assumptions
about key structure
* Bitfinex: Linter fixes
* Bitfinex: Remove key parsing from assetPairFromSymbol
* Bitfinex: Use native error wrapping
* Bitfinex: Skip disabled assets in default ws subs
* SubmitOrder- order.Buy replaced with IsLong
Progresses #1270
* Btcmarkets: order.Buy and order.Sell changed to order.Bid and order.Ask
* Bithumb: SubmitOrder- order.Buy replaced with IsLong
Progresses #1270
* Binanceus: SubmitOrder- order.Buy replaced with IsLong
Progresses #1720
* Bistamp: SubmitOrder- order.Buy replaced with IsLong
Progresses #1270
* Bitfinex: Changed order Side to IsLong
* Binance:switch added to SubmitOrder
* Binance: Replaced Buy and Sell in SubmitOrder with IsLong and IsShort
* Binance:SubmitOrder if statement for order side simplified
* Bitfinex: Fix ws new/modify Order Fields
Fixes Type, Amount and Symbol for new order, and IsShort for modify
order
* Bitfinex: Fix ws order type for margin
Also unifies the pair symbol method to standardised fixCasing
* Fix lint warning on shadow err
* Bitfinex: Remove CustomID duplication for ws
* Bitfinex: Order Execution Limits and Testing
* Bitfinex: added proposed changes
* Bitfinex: lint fixes- removed the unnecessary whitespace and replaced the value with indexing
* Bitfinex: Moved data len check before the string conversion, moved the error for the array conversion before the info len check
* Bitfinex: Change GetSiteInfoConfigData to return slice, add tests
* Bitfinex: Fixed lint issue by preallocating pairs
* initial concept of a nice validation tester for exchanges
* adds some datahandler design
* expand testing
* more tests and fixes
* minor end of day fix for bithumb
* fixes implementation issues
* more test coverage and improvements, but not sure if i should continue
* fix more wrapper implementations
* adds error type, more fixes
* changes signature, fixes implementations
* fixes more wrapper implementations
* one more bit
* more cleanup
* WOW things work?
* lintle 1/1337
* mini bump
* fixes all linting
* neaten
* GetOrderInfo+ asset pair fixes+improvements
* adds new websocket test
* expand ws testing
* fix bug, expand tests, improve implementation
* code coverage of a lot of new codes
* fixes everything
* reverts accidental changes
* minor fixes from reviewing code
* removes Bitfinex cancelBatchOrder implementation
* fixes dumb baby typo for babies
* mini nit fixes
* so many nits to address
* addresses all the nits
* Titlecase
* switcheroo
* removes websocket testing for now
* fix appveyor, minor test fix
* fixes typo, re-kindles killed kode
* skip binance wrapper tests when running CI
* expired context, huobi okx fixes
* kodespull
* fix ordering
* time fix because why not
* fix exmo, others
* hopefully this fixes all of my life's problems
* last thing today
* huobi, more like hypotrophy
* golangci-lint, more like mypooroldknee-splint
* fix huobi times by removing them
* should fix okx currency issues
* blocks the application
* adds last little contingency for pairs
* addresses most nits and new problems
* lovely fixed before seeing why okx sucks
* fixes issues with okx websocket
* the classic receieieivaier
* lintle
* adds test and fixes existing tests
* expands error handling messages during setup
* fixes dumb okx bugs introduced
* quick fix for lint and exmo
* fixes nixes
* fix exmo deposit issue
* lint
* fixes issue with extra asset runs missing
* fix surprise race
* all the lint and merge fixes
* fixes surprise bugs in OKx
* fixes issues with times and chains
* fixing all the merge stuff
* merge fix
* rm logs and a panic potential
* lovely lint lament
* an easy demonstration of scenario, but not of initial purpose
* put it in the bin
* Revert "put it in the bin"
This reverts commit 15c6490f713233d43f10957367fcbf18e3818bdd.
* re-add after immediate error popup
* fix mini poor test design
* okx okay
* merge fixes
* fixes issues discovered in lovely test
* I FORGOT TO COMMIT THIS
* nit fixaroonaboo
* forgoetten test fix
* revert old okx asset intrument work
* fixes
* revert problems I didnt understand. update bybit
* fix merge bugs
* test cleanup
* further improvements
* reshuffle and lint
* rm redundant CI_TEST by rm the CI_TEST field that is redundant
* path fix
* move to its own section, dont run on 32 bit + appveyor
* lint
* fix lbank
* address nits
* let it rip
* fix failing test time range
* niteroo boogaloo
* mod tidy, use common.SimpleTimeFormat
* bitfinex: filter security pairs from spot trading
* asset: add securities type
* bitfinex: remove print
* linter: fix
* gomod tidy
* glorious: nits
* bitfinex: just some orderbook fun and added a pass through for bitfinex funding rate when rate == 0
* bitfinex: move update function from testmain to localised test
* test: fix up
* glorious:nits
* bitfinex; fix casing test
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* Adding Public Endpoints and test functions
* Adding public endpoints and test functions
* Adding private spot endpoints
* Adding private endpoints and corresponding tests for margin
* Adding Margin Private endpoints
* Adding cross margin and flash swap endpoints
* Adding futures private endpoints
* Adding futures private endpoints and corresponding tests
* Adding Options and SubAccount endpoints and their unit tests
* Adding Wrapper functions
* Complete wrapper functions and corresponding unit test functions
* Fixing wrapper issues and adding websocket functions
* Update of Spot websocket and adding futures websocket handlers
* completed futures WS push data endpoints
* Completed Options websocket endpoints
* Adding websocket support for delivery futures and slight update on endpoint funcs
* Added Delivery websocket support and fix linter issues
* Update on Unit tests
* fix slight currency format error
* Fix slight endpoint tempos
* Update on conditional statements and unit tests issues
* fixing slight tempos
* Slight model and websocket data push method change
* Fix unit test tempos and updating models
* Fix on code structures and update on unit tests
* Slight code fix
* Remove print statements
* Update on tradable pairs fetch eps
* Fix websocket tempos
* Adding types to websocket routine manager
* Fix slight issues
* Slight fixes
* Updating wrapper funcs and models
* Slight update
* Update on test
* Update on tradable pairs
* update conditional statements
* Fixing slight issues
* Updating unit tests
* Minor fixes depending review comments
* Remove redundant method declaration
* Adding missing intervals
* Updating fetch tradable pairs
* update tradable pairs issues
* Addressing small tempos
* Slight fix on ticker
* Minor Fixes
* Minor review comment fixes
* Unit test and minor code updates
* Slight code updates
* Minor updates depending review comments
* Fixes
* Updating incoming message matcher
* Fix missing merge issue
* Fix minor wrapper issues
* Updating ratelimit and other issues
* Updating endpoint models and adding missing eps
* Update on code structure and models
* Minor codespell fixes
* Minor update on models
* fix unit test panic
* Minor race fix
* Fix issues in generating signature and unit tests
* Minor update on wrapper and unit tests
* Minor fix on wrapper
* Mini linter issues fix
* Minor fix
* endpoint fixes and slight update
* Minor fixes
* Updating exchange functions and unit tests
* Unit test and wrapper updates
* Remove options candlestick support
* Minor unit test and wrapper fix
* Unit test update
* minor fix on unit test and wrapper
* endpoints constants name change
* Add minor wrapper issues
* endpoint constants update
* endpoint url updates
* Updating subscriptions
* fixing dual mode endpoint methods
* minor fix
* rm small tempo
* Update on websocket orderbook handling
* Orderbook and currency pair update
* fix linter and test issues
* minor helper function update
* Fix wrapper coverage and wrapper issues
* delete unused variables
* Minor fix on ReadData() call
* separating websocket handlers
* separating websocket handlers
* Minor fix on enabled pair
* minor fix
* check instrument availability in spot
* create a separate subscriber for sake of multiple websocket connection
* linter fix
* minor websocket and gateio endpoints fix
* fix nil pointer exception
* minor fixes
* spelling fix decerializes -> deserializes
* fix Bitfinex unit test issues
* minor unknown currency pair labling fix
* minor currency pair handling fix
* slight update on GetDepositAddress wrapper unit test
* setting max request job to 200
* fixing numerical and timestamp type convert
* fix value overflow error
* change method of parsing orderbook price
* unifying timestamp conversion types to gateioTime
---------
Co-authored-by: Samuael Adnew <samuaelad@Samuaels-MacBook-Air.local>
* exchanges/sharedtestvalues: implement new functions to handle test skipping and announcements for standardising.
* exchanges: fin test impl.
* linter: fixes
* exchange_template: fix test
* allocate so it doesn't make a panic at the disco
* glorious: nits
* glorious: nits
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/sharedtestvalues/sharedtestvalues.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* linter: fix
* linter: shhhh
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* exchanges: add setTimeWindow boolean to GetKlineRequest params to differentiate between a set time period return from endpoint.
* glorious: nits
* exchange: conjugation
* Update exchanges/exchange.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits and an assortment of differences
* exchanges: remove some comments
* glorious: nits
* cleanup
* tests: fix
* Update exchanges/hitbtc/hitbtc_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/kline/kline.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/kline/kline_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* kline: fix test
* rm unused variables
* almost: nits
* glorious: nits
* linter: fix
* rm unused variable
* Refactored comment in the okex tests to ensure that it accurately reflects the variable name and the issue related to the time window, as requested by GloriousCode. The previous comment did not align with the identifier assigned to the property, which could cause confusion and misunderstanding among other programmers or stakeholders. The updated comment will improve the clarity and readability of the codebase and make it easier to understand the intended purpose of the associated variables. The change was made with the aim of improving the overall quality and maintainability of the code.
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* wrapper_coverage/exchanges: cancel context to not send rest requests/ populate context through functions that do rest requests
* linter: fix
* exchange_template: fix test
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
* common: adjust common error slice to allow multi errors.Is matching and conform to interface better
* zb: forgot to save?
* linties: fixies
* linties: word change as well.
* nitters: glorious
* buts
* nitters: fix glorious bug
* Update common/common.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* nitters: shifty
---------
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* stream: set connection monitor delay.
- this fixes a bug where the connection monitor delay config value does not
get set to the websocket on intialization.
* multi: add connection monitor delay to exchange config.
- this adds the connection monitor delay config option to the exchange type.
- the validate function of the exchange type has been updated to validate the
connection monitor delay value as well.
* multi: resolve review issues.
* add backtester support
* Prevent live data custom candles, prevent nanosecond candles
* test coverage
* a more interesting rsi strategy result
* actual custom candle and proper strat date
* add test to old funk
* typos 🌞🌞
* this was definitely worth failing linting for
* Adds stricter processing and adapts to it
* now compat with partial and absent candles
* test fixes, zb fixes
* fix more introduced bugeroos
* fix more introduced bugeroosx2
* linting for one space is so annoying
* addresseroos niteroos
* Update backtester/engine/setup.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* kline: Add builder and testing
* Ideas
* kline: deploy builder functionality across GCT
* exchanges: implement across gct
* exchanges: Add tests and fix implementations before kline package testing and veri.
* kline: Add tests and start to fix ConvertToNewInterval
* kline: fix ConvertToNewInterval add tests
* kline: complete overarching tests now on to exchanges
* kline: finish exchange tests and implement limits
* exchanges: more fixes
* linter: fix
* engine: fix tests
* kraken: fix recent trades and other fixes
* zb: fix tests
* bithumb: fix empty insertion
* kline: refactor/optimize CreateKline function
* kline: remove the mooos!
* kline: prealloc CalculateCandleDateRanges
* linter: fix
* exchanges: prealloc extended
* fix whoopsie
* reverse fix because this is a whoopsie
* okx: fix risidual issues
* linter: fix
* kline: initial nits from @gloriouscode
* kline: rename builder -> request and cascade change
* linter: fix + test
* kline: update forced alignment on start and end times when CreateKlineRequest is called.
* nits: more more more
* NITS: Addressed
* tests: fix race issue
* Update exchanges/kline/request.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* kline: add method AddPadding() to automatically fill in holes in kline.Request functionality and reject if missing data when converting
* kline: Add params start and end to addPadding() to insert blanks in between block
* kline: remove test comment code as it's not needed anymore
* kline: fix lint and test
* kline: sort slice without extra bool check every iteration
* okx: fix issues with timeing and candles and such from niterinos & address typo
* Update exchanges/kline/kline.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: niterinos
* Update exchanges/poloniex/poloniex_wrapper.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits now onto conflicts YAYA!!!
* Update exchanges/exchange_test.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits again
* thrasher: nitters
* thrasher: niterinos - adds partial flag for incomplete recent candles and fetching.
* kline: rm fmtizzle packageizzle
* glorious: nitters
* glorious: more niterinos
* fix last niterinos
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Modifications for a smoother live run
* Fixes data appending
* Successfully allows multi-currency live trading. Adds multiple currencies to live DCA strategy
* Attempting to get cash and carry working
* Poor attempts at sorting out data and appending it properly with USD in mind
* =designs new live data handler
* Updates cash and carry strat to work
* adds test coverage. begins closeallpositions function
* Updates cash and carry to work live
* New kline.Event type. Cancels orders on close. Rn types
* =Fixes USD funding issue
* =fixes tests
* fixes tests AGAIN
* adds coverage to close all orders
* crummy tests, should override
* more tests
* more tests
* more coverage
* removes scourge of currency.Pair maps. More tests
* missed currency stuff
* Fixes USD data issue & collateral issue. Needs to close ALL orders
* Now triggers updates on the very first data entry
* All my problems are solved now????
* fixes tests, extends coverage
* there is some really funky candle stuff going on
* my brain is melting
* better shutdown management, fixes freezing bug
* fixes data duplication issues, adds retries to requests
* reduces logging, adds verbose options
* expands coverage over all new functionality
* fixes fun bug from curr == curr to curr.Equal(curr)
* fixes setup issues and tests
* starts adding external wallet amounts for funding
* more setup for assets
* setup live fund calcs and placing orders
* successfully performs automated cash and carry
* merge fixes
* funding properly set at all times
* fixes some bugs, need to address currencystatistics still
* adds 'appeneded' trait, attempts to fix some stats
* fixes stat bugs, adds cool new fetchfees feature
* fixes terrible processing bugs
* tightens realorder stats, sadly loses some live stats
* this actually sets everything correctly for bothcd ..cd ..cd ..cd ..cd ..!
* fix tests
* coverage
* beautiful new test coverage
* docs
* adds new fee getter delayer
* commits from the correct directory
* Lint
* adds verbose to fund manager
* Fix bug in t2b2 strat. Update dca live config. Docs
* go mod tidy
* update buf
* buf + test improvement
* Post merge fixes
* fixes surprise offset bug
* fix sizing restrictions for cash and carry
* fix server lints
* merge fixes
* test fixesss
* lintle fixles
* slowloris
* rn run to task, bug fixes, close all on close
* rpc lint and fixes
* bugfix: order manager not processing orders properly
* somewhat addresses nits
* absolutely broken end of day commit
* absolutely massive knockon effects from nits
* massive knockon effects continue
* fixes things
* address remaining nits
* jk now fixes things
* addresses the easier nits
* more nit fixers
* more niterinos addressederinos
* refactors holdings and does some nits
* so buf
* addresses some nits, fixes holdings bugs
* cleanup
* attempts to fix alert chans to prevent many chans waiting?
* terrible code, will revert
* to be reviewed in detail tomorrow
* Fixes up channel system
* smashes those nits
* fixes extra candles, fixes collateral bug, tests
* fixes data races, introduces reflection
* more checks n tests
* Fixes cash and carry issues. Fixes more cool bugs
* fixes ~typer~ typo
* replace spot strats from ftx to binance
* fixes all the tests I just destroyed
* removes example path, rm verbose
* 1) what 2) removes FTX references from the Backtester
* renamed, non-working strategies
* Removes FTX references almost as fast as sbf removes funds
* regen docs, add contrib names,sort contrib names
* fixes merge renamings
* Addresses nits. Fixes setting API credentials. Fixes Binance limit retrieval
* Fixes live order bugs with real orders and without
* Apply suggestions from code review
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update backtester/engine/live.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update backtester/engine/live.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* Update backtester/config/strategyconfigbuilder/main.go
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* updates docs
* even better docs
Co-authored-by: Adrian Gallagher <adrian.gallagher@thrasher.io>
* few fixes and add ratelimiter
* adds test
* revert configtest.json changes
* configtest updated
* WIP: adds public endpoint support
* WIP: adds public endpoint support
* adds public endpoint support
* WIP: adds auth. endpoint support
* adds test for auth. endpoint
* fixes
* adds auth. endpoint support
* WIP: ws support
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* WIP
* Testing
* Complete WS spot testing
* adds support for ws events
* minor change
* WIP: adds REST support for CoinMarginedFutures
* Fixes
* WIP: adds REST support for CoinMarginedFutures
* Fixes
* improvement in SPOT REST
* Typo fix
* WIP: add REST support for CMF Account API
* minor fixes
* WIP: add support for CMF conditional orders and few minor fixes
* complete support for CMF conditional orders
* adds support for public CMF endpoint
* adds support for CMF position API
* Complete REST CMF support
* WIP
* Testing REST CMF support
* Testing REST CMF support
* Testing REST CMF support completed
* WIP: add support for UMF
* completed non-auth UMF
* WIP: add support for REST Auth. UMF
* WIP: add support for REST Auth. UMF and some improvements
* WIP
* WIP
* WIP
* completed REST UMF
* renaming
* adds REST support for futures
* add testcases for UMF and some optimizations
* add testcases for futures
* Testing UMF, futures and its changes
* Fixes
* Fixes after testing
* WIP
* WIP
* WIP
* completed ws USDT futures support
* WIP: ws support for futures
* fixes in WS futures
* fixes in WS support
* roll back changes made for WS CMF, USDT and Futures
* fixes
* WIP
* WIP
* fixes
* Steps for new PR
* WIP
* WIP
* WIP
* WIP
* complete PR setup
* fixes for successfully running tests
* update in symbol for futures pair in test file
* WIP
* Fixes in test file and other minor fix
* fix testdata/configtest.json
* reset CONTRIBUTORS file
* review changes
* remove unwanted file
* remove redundant code
* improvisation
* adds comment for exported functions
* remove unwanted TODO and commented code
* fix
* improvisation
* fix
* defined errors
* improvisation
* improvisation
* improvisation
* updates test
* adds comment for exported types
* review changes
* review changes
* fix
* fixes
* Changes for making BYBIT compatible with existing code base
* Test file changes
* Changes for making BYBIT compatible with existing code base
* Changes for making BYBIT compatible with existing code base
* fix lint issues
* fix
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* review changes
* WIP
* add test cases for new API's
* minor improvements
* add missing API and their tests
* minor fixes
* add bybitTime
* add bybitTimeSec, bybitTimeMilliSec, bybitTimeNanoSec and necessary support
* fix GetTradeHistory function
* error handling
* test fixes
* add GetServerTime API
* adds GetHistoricCandlesExtended and review changes
* test fixes
* minor fix
* integrating CMF Bybit recent change log
* minor fixes
* adds extractCurrencyPair
* minor fixes
* minor fix
* review changes
* adds variable declaration of error
* review commit
* adds embeddable type in API response for all API and integrate it
* fixes
* adds authentication WS connection
* review changes
* review changes
* compatible changes
* adds asset to GetWithdrawalsHistory
* adds asset_type in rpc.proto
* adds asset argument in gctcli withdrawal request command
* improve error handling in exchange API error
* web socket fix
* review changes
* improvements
* improvements
* minor fix
* review changes
* fixing wrapper issues
* fixes
* fixes
* review changes
* add test cases
* fix for GetActiveOrders
* lint fixes
* fixes in websocket
* adds wrapper testcases
* adds wrapper testcases
* adds wrapper testcases
* fixes
* fix issue with GetHistoricCandlesExtended
* fix merge issues
* improving error reporting
* adds wrapper testcases and a minor fix
* gctrpc changes
* adds test cases
fixes in websocket
* review changes for ws
* review changes in WS
* fix gctrpc
* merge fixes
* review changes
* WIP
* updates pair in configs
* adds new asset USDCMarginedFutures
* adds URL const for USDCMarginedFutures
* adds API support
* minor fixes
* adds kline API
* minor fix
* adds API
* adds API
* adds API
* WIP
* WIP
* WIP
* adds support for USDC auth requests to SendAuthHTTPRequest
* adds SendUSDCAuthHTTPRequest
* run test and fix them
* rollback support added for Auth. USDC request inside SendAuthHTTPRequest
* adds API and test cases
* adds API and test cases
* adds APIs and test cases
* adds APIs
* adds rate limit for USDC
* adds USDCMarginedFutures to wrapper
* adds USDC testcases in wrapper and fix few issues
* minor test fixes
* minor test fixes
* fix lint issues
* WIP
* Merge changes
* minor fixes
* remove "else" and optimize
* review changes
* review changes
* review changes
* fix lint issue
* merge fix
* fix test
* fix templates and run them
* changes after merge
* review changes and improvements
* code improvement
* fixes with respect to changes in API response in documentation
* fixed review change in test
* adds check in CancelExistingOrder
* update exchange template
* review changes
* adds GetDepositAddress API
* WIP: adds GetOrderHistory
* complete GetOrderHistory
* fixes
* adds test case
* fixes and add WithdrawFund API
* WIP
* WIP
* updating all SendAuthHTTPRequest call
* adds WithdrawCryptocurrencyFunds
* update test cases
* fix lint issues
* fixes after merge
* adds GetAvailableTransferChains and few fixes
* minor fix in GetDepositAddress
* minor fix with WS ping/pong handling
* add ping handler for WS Auth.
* fix typo mistake
* update doc
* orders: deprecate SubmitResponse return and change to *order.Detail construct detail from order.Submit struct
* orders: add coverage, fix tests
* coinut: rm test for checking
* orders: revert change for return and change field ID to a more explicit name OrderID
* orders: Add method to see if the order was placed
* order: change field name in Cancel type to be more explicit
* orders: standardize field -> OrderID
* backtester: populate change
* orders: add test
* gctscript: fix field name
* linter: fix issues
* linter: more fixes
* linter: forever
* exchanges_tests: populate order.Submit field exchange name
* Update exchanges/order/order_types.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* Update exchanges/order/orders.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
* glorious: nits
* thrasher: nits
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* orders: Add derive modify struct method to order.Detail and then subsequent method to derive and standardize response details
* exchanges: call modify method in wrappers
* linter: fixes
* engine/wsroutineman: remove print summary
* glorious: nits, removed modifyOrder functionality for Bithumb. There are not docs to support this.
* Update exchanges/order/orders.go
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* glorious: nits
Co-authored-by: Scott <gloriousCode@users.noreply.github.com>
* order: slight optimizations
* orders: add benchmarks, small optimize and change order side to uin8 for comparitive optimizations.
* orders: continue to convert string type -> uint
* orders/backtester: interim move type to orders package, later can expand or deprecate.
* orders: handle errors
* orders: optimize filters and remove error returns when its clearly not needed
* orders: remove log call
* backtester: zero value check
* orders/futures: zero value -> flag
* linter: fix
* linter: more fixes
* linters: rides again
* glorious: nits
* common: Add zero value unix check for time values; also addresses glorious nits
* glorious scott: nits
Co-authored-by: Ryan O'Hara-Reid <ryan.oharareid@thrasher.io>
